00000340672023FYfalsehttp://fasb.org/us-gaap/2023#OtherAssetsNoncurrenthttp://fasb.org/us-gaap/2023#OtherAssetsNoncurrenthttp://fasb.org/us-gaap/2023#OtherLiabilitiesCurrenthttp://fasb.org/us-gaap/2023#OtherLiabilitiesCurrenthttp://fasb.org/us-gaap/2023#OtherLiabilitiesNoncurrenthttp://fasb.org/us-gaap/2023#OtherLiabilitiesNoncurrent0.33330.33330.3333http://fasb.org/us-gaap/2023#OtherNonoperatingIncomeExpensehttp://fasb.org/us-gaap/2023#OtherNonoperatingIncomeExpensehttp://fasb.org/us-gaap/2023#OtherNonoperatingIncomeExpense00000340672023-01-012023-12-3100000340672023-06-30iso4217:USD00000340672024-02-20xbrli:shares00000340672023-12-3100000340672022-12-31iso4217:USDxbrli:shares00000340672022-01-012022-12-3100000340672021-01-012021-12-310000034067us-gaap:CommonStockMember2020-12-310000034067us-gaap:AdditionalPaidInCapitalMember2020-12-310000034067us-gaap:RetainedEarningsMember2020-12-310000034067us-gaap:AccumulatedOtherComprehensiveIncomeMember2020-12-310000034067us-gaap:TreasuryStockCommonMember2020-12-310000034067us-gaap:ParentMember2020-12-3100000340672020-12-310000034067us-gaap:RetainedEarningsMember2021-01-012021-12-310000034067us-gaap:ParentMember2021-01-012021-12-310000034067us-gaap:AccumulatedOtherComprehensiveIncomeMember2021-01-012021-12-310000034067boom:EquityOfferingMemberus-gaap:CommonStockMember2021-01-012021-12-310000034067boom:EquityOfferingMemberus-gaap:AdditionalPaidInCapitalMember2021-01-012021-12-310000034067boom:EquityOfferingMemberus-gaap:ParentMember2021-01-012021-12-310000034067us-gaap:CommonStockMemberboom:ATMOfferingMember2021-01-012021-12-310000034067us-gaap:AdditionalPaidInCapitalMemberboom:ATMOfferingMember2021-01-012021-12-310000034067boom:ATMOfferingMemberus-gaap:ParentMember2021-01-012021-12-310000034067us-gaap:CommonStockMember2021-01-012021-12-310000034067us-gaap:AdditionalPaidInCapitalMember2021-01-012021-12-310000034067us-gaap:TreasuryStockCommonMember2021-01-012021-12-310000034067us-gaap:CommonStockMember2021-12-310000034067us-gaap:AdditionalPaidInCapitalMember2021-12-310000034067us-gaap:RetainedEarningsMember2021-12-310000034067us-gaap:AccumulatedOtherComprehensiveIncomeMember2021-12-310000034067us-gaap:TreasuryStockCommonMember2021-12-310000034067us-gaap:ParentMember2021-12-3100000340672021-12-310000034067us-gaap:RetainedEarningsMember2022-01-012022-12-310000034067us-gaap:ParentMember2022-01-012022-12-310000034067us-gaap:AccumulatedOtherComprehensiveIncomeMember2022-01-012022-12-310000034067us-gaap:CommonStockMember2022-01-012022-12-310000034067us-gaap:AdditionalPaidInCapitalMember2022-01-012022-12-310000034067us-gaap:TreasuryStockCommonMember2022-01-012022-12-310000034067us-gaap:CommonStockMember2022-12-310000034067us-gaap:AdditionalPaidInCapitalMember2022-12-310000034067us-gaap:RetainedEarningsMember2022-12-310000034067us-gaap:AccumulatedOtherComprehensiveIncomeMember2022-12-310000034067us-gaap:TreasuryStockCommonMember2022-12-310000034067us-gaap:ParentMember2022-12-310000034067us-gaap:RetainedEarningsMember2023-01-012023-12-310000034067us-gaap:ParentMember2023-01-012023-12-310000034067us-gaap:AccumulatedOtherComprehensiveIncomeMember2023-01-012023-12-310000034067us-gaap:CommonStockMember2023-01-012023-12-310000034067us-gaap:AdditionalPaidInCapitalMember2023-01-012023-12-310000034067us-gaap:TreasuryStockCommonMember2023-01-012023-12-310000034067us-gaap:CommonStockMember2023-12-310000034067us-gaap:AdditionalPaidInCapitalMember2023-12-310000034067us-gaap:RetainedEarningsMember2023-12-310000034067us-gaap:AccumulatedOtherComprehensiveIncomeMember2023-12-310000034067us-gaap:TreasuryStockCommonMember2023-12-310000034067us-gaap:ParentMember2023-12-310000034067boom:EquityOfferingMember2023-01-012023-12-310000034067boom:EquityOfferingMember2022-01-012022-12-310000034067boom:EquityOfferingMember2021-01-012021-12-310000034067boom:ATMOfferingMember2023-01-012023-12-310000034067boom:ATMOfferingMember2022-01-012022-12-310000034067boom:ATMOfferingMember2021-01-012021-12-31boom:segment0000034067boom:ArcadiaSegmentMember2022-12-310000034067boom:DynaEnergeticsSegmentMember2022-12-310000034067boom:NobelCladSegmentMember2022-12-310000034067boom:ArcadiaSegmentMember2023-01-012023-12-310000034067boom:DynaEnergeticsSegmentMember2023-01-012023-12-310000034067boom:NobelCladSegmentMember2023-01-012023-12-310000034067boom:ArcadiaSegmentMember2023-12-310000034067boom:DynaEnergeticsSegmentMember2023-12-310000034067boom:NobelCladSegmentMember2023-12-310000034067srt:MinimumMemberus-gaap:BuildingAndBuildingImprovementsMember2023-12-310000034067us-gaap:BuildingAndBuildingImprovementsMembersrt:MaximumMember2023-12-310000034067srt:MinimumMemberus-gaap:ToolsDiesAndMoldsMember2023-12-310000034067srt:MaximumMemberus-gaap:ToolsDiesAndMoldsMember2023-12-310000034067boom:FurnitureFixturesAndComputerEquipmentMembersrt:MinimumMember2023-12-310000034067boom:FurnitureFixturesAndComputerEquipmentMembersrt:MaximumMember2023-12-310000034067srt:MinimumMemberus-gaap:PropertyPlantAndEquipmentOtherTypesMember2023-12-310000034067srt:MaximumMemberus-gaap:PropertyPlantAndEquipmentOtherTypesMember2023-12-310000034067us-gaap:LandMember2023-12-310000034067us-gaap:LandMember2022-12-310000034067us-gaap:BuildingAndBuildingImprovementsMember2023-12-310000034067us-gaap:BuildingAndBuildingImprovementsMember2022-12-310000034067us-gaap:ToolsDiesAndMoldsMember2023-12-310000034067us-gaap:ToolsDiesAndMoldsMember2022-12-310000034067boom:FurnitureFixturesAndComputerEquipmentMember2023-12-310000034067boom:FurnitureFixturesAndComputerEquipmentMember2022-12-310000034067us-gaap:PropertyPlantAndEquipmentOtherTypesMember2023-12-310000034067us-gaap:PropertyPlantAndEquipmentOtherTypesMember2022-12-310000034067us-gaap:ConstructionInProgressMember2023-12-310000034067us-gaap:ConstructionInProgressMember2022-12-310000034067boom:AssetImpairmentMember2023-01-012023-12-310000034067boom:AssetImpairmentMemberus-gaap:OperatingSegmentsMemberboom:DynaEnergeticsSegmentMember2023-01-012023-12-310000034067boom:AssetImpairmentMemberus-gaap:OperatingSegmentsMemberboom:NobelCladSegmentMember2023-01-012023-12-310000034067boom:ArcadiaProductsLLCMember2021-12-23xbrli:pure0000034067boom:RedeemableNoncontrollingInterestHolderMember2023-12-310000034067srt:MinimumMember2023-01-012023-12-310000034067srt:MaximumMember2023-01-012023-12-310000034067us-gaap:FairValueInputsLevel2Member2023-12-310000034067us-gaap:FairValueInputsLevel2Member2022-12-310000034067us-gaap:EmployeeSeveranceMemberus-gaap:OperatingSegmentsMemberboom:DynaEnergeticsSegmentMember2023-01-012023-12-310000034067us-gaap:OperatingSegmentsMemberboom:DynaEnergeticsSegmentMemberus-gaap:ContractTerminationMember2023-01-012023-12-310000034067us-gaap:OperatingSegmentsMemberboom:DynaEnergeticsSegmentMemberus-gaap:FacilityClosingMember2023-01-012023-12-310000034067us-gaap:OperatingSegmentsMemberboom:StockBasedCompensationMemberboom:DynaEnergeticsSegmentMember2023-01-012023-12-310000034067us-gaap:OperatingSegmentsMemberboom:DynaEnergeticsSegmentMember2023-01-012023-12-310000034067us-gaap:EmployeeSeveranceMemberus-gaap:OperatingSegmentsMemberboom:NobelCladSegmentMember2023-01-012023-12-310000034067us-gaap:OperatingSegmentsMemberboom:NobelCladSegmentMemberus-gaap:ContractTerminationMember2023-01-012023-12-310000034067us-gaap:OperatingSegmentsMemberboom:NobelCladSegmentMemberus-gaap:FacilityClosingMember2023-01-012023-12-310000034067us-gaap:OperatingSegmentsMemberboom:StockBasedCompensationMemberboom:NobelCladSegmentMember2023-01-012023-12-310000034067us-gaap:OperatingSegmentsMemberboom:NobelCladSegmentMember2023-01-012023-12-310000034067us-gaap:EmployeeSeveranceMemberus-gaap:CorporateNonSegmentMember2023-01-012023-12-310000034067boom:AssetImpairmentMemberus-gaap:CorporateNonSegmentMember2023-01-012023-12-310000034067us-gaap:CorporateNonSegmentMemberus-gaap:ContractTerminationMember2023-01-012023-12-310000034067us-gaap:CorporateNonSegmentMemberus-gaap:FacilityClosingMember2023-01-012023-12-310000034067boom:StockBasedCompensationMemberus-gaap:CorporateNonSegmentMember2023-01-012023-12-310000034067us-gaap:CorporateNonSegmentMember2023-01-012023-12-310000034067us-gaap:EmployeeSeveranceMember2023-01-012023-12-310000034067us-gaap:ContractTerminationMember2023-01-012023-12-310000034067us-gaap:FacilityClosingMember2023-01-012023-12-310000034067boom:StockBasedCompensationMember2023-01-012023-12-310000034067us-gaap:DevelopedTechnologyRightsMember2023-12-310000034067us-gaap:CustomerRelationshipsMember2023-12-310000034067us-gaap:TrademarksAndTradeNamesMember2023-12-310000034067boom:CustomerBacklogMember2023-12-310000034067us-gaap:DevelopedTechnologyRightsMember2022-12-310000034067boom:CustomerBacklogMember2022-12-310000034067us-gaap:CustomerRelationshipsMember2022-12-310000034067us-gaap:TrademarksAndTradeNamesMember2022-12-31boom:lease0000034067boom:ArcadiaMember2023-12-310000034067us-gaap:RevolvingCreditFacilityMemberboom:SyndicatedCreditFacilityMember2023-12-310000034067us-gaap:RevolvingCreditFacilityMemberboom:SyndicatedCreditFacilityMember2022-12-310000034067boom:SyndicatedCreditFacilityMemberus-gaap:SecuredDebtMember2023-12-310000034067boom:SyndicatedCreditFacilityMemberus-gaap:SecuredDebtMember2022-12-310000034067boom:CommerzbankLineOfCreditMember2023-12-310000034067boom:CommerzbankLineOfCreditMember2022-12-310000034067us-gaap:LineOfCreditMemberboom:SyndicatedCreditFacilityMember2021-12-232021-12-230000034067us-gaap:LineOfCreditMemberboom:SyndicatedCreditFacilityMember2021-12-230000034067us-gaap:LineOfCreditMemberboom:SyndicatedCreditFacilityMemberus-gaap:SecuredDebtMember2021-12-230000034067us-gaap:LineOfCreditMemberus-gaap:RevolvingCreditFacilityMemberboom:SyndicatedCreditFacilityMember2021-12-23boom:bank0000034067us-gaap:LineOfCreditMembersrt:MinimumMemberboom:SecuredOvernightFinancingRateSOFRMemberboom:SyndicatedCreditFacilityMember2023-01-012023-12-310000034067us-gaap:LineOfCreditMembersrt:MaximumMemberboom:SecuredOvernightFinancingRateSOFRMemberboom:SyndicatedCreditFacilityMember2023-01-012023-12-310000034067us-gaap:LineOfCreditMemberus-gaap:BaseRateMembersrt:MinimumMemberboom:SyndicatedCreditFacilityMember2023-01-012023-12-310000034067us-gaap:LineOfCreditMemberus-gaap:BaseRateMembersrt:MaximumMemberboom:SyndicatedCreditFacilityMember2023-01-012023-12-310000034067us-gaap:LineOfCreditMemberus-gaap:RevolvingCreditFacilityMemberboom:SyndicatedCreditFacilityMember2023-12-310000034067us-gaap:LineOfCreditMemberboom:SyndicatedCreditFacilityMember2023-12-310000034067boom:QuarterEndedJune302022ThroughQuarterMarch312023Memberus-gaap:LineOfCreditMemberboom:SyndicatedCreditFacilityMember2023-01-012023-12-310000034067us-gaap:LineOfCreditMemberboom:SyndicatedCreditFacilityMember2023-01-012023-12-310000034067boom:GermanBankLineOfCreditMemberus-gaap:LineOfCreditMember2023-12-31iso4217:EUR0000034067us-gaap:LineOfCreditMemberboom:CommerzbankLineOfCreditMember2022-12-310000034067us-gaap:LineOfCreditMemberboom:CommerzbankLineOfCreditMember2023-12-310000034067us-gaap:EurodollarMemberus-gaap:LineOfCreditMemberboom:CommerzbankLineOfCreditMember2023-12-310000034067us-gaap:CostOfSalesMember2023-01-012023-12-310000034067us-gaap:CostOfSalesMember2022-01-012022-12-310000034067us-gaap:CostOfSalesMember2021-01-012021-12-310000034067us-gaap:GeneralAndAdministrativeExpenseMember2023-01-012023-12-310000034067us-gaap:GeneralAndAdministrativeExpenseMember2022-01-012022-12-310000034067us-gaap:GeneralAndAdministrativeExpenseMember2021-01-012021-12-310000034067boom:SellingandDistributionExpenseMember2023-01-012023-12-310000034067boom:SellingandDistributionExpenseMember2022-01-012022-12-310000034067boom:SellingandDistributionExpenseMember2021-01-012021-12-310000034067boom:RestructuringSettlementAndImpairmentProvisionsMember2023-01-012023-12-310000034067boom:RestructuringSettlementAndImpairmentProvisionsMember2022-01-012022-12-310000034067boom:RestructuringSettlementAndImpairmentProvisionsMember2021-01-012021-12-3100000340672016-11-040000034067boom:RestrictedStockAwardsAndRestrictedStockUnitsRSUMember2016-11-042016-11-040000034067us-gaap:RestrictedStockUnitsRSUMember2023-01-012023-12-310000034067srt:MinimumMemberus-gaap:PerformanceSharesMember2023-01-012023-12-310000034067srt:MaximumMemberus-gaap:PerformanceSharesMember2023-01-012023-12-310000034067boom:PhantomShareUnitsGrantedIn2022Memberboom:AchievementOfTargetedAdjustedEBITDAMember2023-01-012023-12-310000034067boom:PhantomShareUnitsGrantedIn2020Memberboom:AchievementOfTargetedAdjustedEBITDAMember2023-01-012023-12-310000034067boom:PhantomShareUnitsGrantedIn2021Memberboom:AchievementOfTargetedAdjustedEBITDAMember2023-01-012023-12-310000034067boom:PhantomShareUnitsGrantedIn2021Memberboom:AchievementOfRelativeTSRPerformanceMember2023-01-012023-12-310000034067boom:AchievementOfRelativeTSRPerformanceMemberboom:PhantomShareUnitsGrantedIn2020Member2023-01-012023-12-310000034067us-gaap:RestrictedStockMemberboom:A2016OmnibusIncentivePlanMember2021-12-310000034067us-gaap:RestrictedStockMemberboom:A2016OmnibusIncentivePlanMember2022-01-012022-12-310000034067us-gaap:RestrictedStockMemberboom:A2016OmnibusIncentivePlanMember2022-12-310000034067us-gaap:RestrictedStockMemberboom:A2016OmnibusIncentivePlanMember2023-01-012023-12-310000034067us-gaap:RestrictedStockMemberboom:A2016OmnibusIncentivePlanMember2023-12-310000034067us-gaap:RestrictedStockUnitsRSUMemberboom:A2016OmnibusIncentivePlanMember2021-12-310000034067us-gaap:RestrictedStockUnitsRSUMemberboom:A2016OmnibusIncentivePlanMember2022-01-012022-12-310000034067us-gaap:RestrictedStockUnitsRSUMemberboom:A2016OmnibusIncentivePlanMember2022-12-310000034067us-gaap:RestrictedStockUnitsRSUMemberboom:A2016OmnibusIncentivePlanMember2023-01-012023-12-310000034067us-gaap:RestrictedStockUnitsRSUMemberboom:A2016OmnibusIncentivePlanMember2023-12-310000034067us-gaap:PerformanceSharesMemberboom:A2016OmnibusIncentivePlanMember2021-12-310000034067us-gaap:PerformanceSharesMemberboom:A2016OmnibusIncentivePlanMember2022-01-012022-12-310000034067us-gaap:PerformanceSharesMemberboom:A2016OmnibusIncentivePlanMember2022-12-310000034067us-gaap:PerformanceSharesMemberboom:A2016OmnibusIncentivePlanMember2023-01-012023-12-310000034067us-gaap:PerformanceSharesMemberboom:A2016OmnibusIncentivePlanMember2023-12-310000034067us-gaap:RestrictedStockMember2023-12-310000034067us-gaap:RestrictedStockMember2023-01-012023-12-310000034067us-gaap:RestrictedStockUnitsRSUMember2023-12-310000034067us-gaap:PerformanceSharesMember2023-12-310000034067us-gaap:PerformanceSharesMember2023-01-012023-12-310000034067us-gaap:EmployeeStockMember2023-12-310000034067us-gaap:EmployeeStockMember2023-01-012023-12-310000034067us-gaap:EmployeeStockMembersrt:MaximumMember2023-01-012023-12-310000034067us-gaap:EmployeeStockMember2022-01-012022-12-310000034067us-gaap:EmployeeStockMember2021-01-012021-12-310000034067boom:RestrictedStockAwardsandRestrictedStockUnitsTimeBasedMemberus-gaap:ShareBasedCompensationAwardTrancheOneMember2023-01-012023-12-310000034067boom:RestrictedStockAwardsandRestrictedStockUnitsTimeBasedMemberus-gaap:ShareBasedCompensationAwardTrancheTwoMember2023-01-012023-12-310000034067boom:RestrictedStockAwardsandRestrictedStockUnitsTimeBasedMemberus-gaap:ShareBasedCompensationAwardTrancheThreeMember2023-01-012023-12-310000034067us-gaap:PensionPlansDefinedBenefitMembersrt:MinimumMember2020-01-012020-12-310000034067us-gaap:PensionPlansDefinedBenefitMembersrt:MaximumMember2020-01-012020-12-310000034067us-gaap:PensionPlansDefinedBenefitMember2023-01-012023-12-310000034067us-gaap:PensionPlansDefinedBenefitMember2022-01-012022-12-310000034067us-gaap:PensionPlansDefinedBenefitMember2021-01-012021-12-310000034067us-gaap:OtherCurrentAssetsMember2023-12-310000034067us-gaap:OtherCurrentAssetsMember2022-12-310000034067us-gaap:OtherNoncurrentAssetsMember2023-12-310000034067us-gaap:OtherNoncurrentAssetsMember2022-12-310000034067us-gaap:OtherCurrentLiabilitiesMember2023-12-310000034067us-gaap:OtherCurrentLiabilitiesMember2022-12-310000034067us-gaap:OtherNoncurrentLiabilitiesMember2023-12-310000034067us-gaap:OtherNoncurrentLiabilitiesMember2022-12-310000034067us-gaap:ForeignCountryMember2023-12-310000034067us-gaap:StateAndLocalJurisdictionMember2023-12-310000034067boom:LegallyEntityStructuringAndFacilityClosingMember2021-01-012021-12-310000034067boom:ArcadiaMember2021-12-310000034067boom:ArcadiaSegmentMember2022-01-012022-12-310000034067boom:ArcadiaSegmentMember2021-01-012021-12-310000034067boom:DynaEnergeticsSegmentMember2022-01-012022-12-310000034067boom:DynaEnergeticsSegmentMember2021-01-012021-12-310000034067boom:NobelCladSegmentMember2022-01-012022-12-310000034067boom:NobelCladSegmentMember2021-01-012021-12-310000034067us-gaap:OperatingSegmentsMemberboom:ArcadiaSegmentMember2023-01-012023-12-310000034067us-gaap:OperatingSegmentsMemberboom:ArcadiaSegmentMember2022-01-012022-12-310000034067us-gaap:OperatingSegmentsMemberboom:ArcadiaSegmentMember2021-01-012021-12-310000034067us-gaap:OperatingSegmentsMemberboom:DynaEnergeticsSegmentMember2022-01-012022-12-310000034067us-gaap:OperatingSegmentsMemberboom:DynaEnergeticsSegmentMember2021-01-012021-12-310000034067us-gaap:OperatingSegmentsMemberboom:NobelCladSegmentMember2022-01-012022-12-310000034067us-gaap:OperatingSegmentsMemberboom:NobelCladSegmentMember2021-01-012021-12-310000034067us-gaap:OperatingSegmentsMember2023-01-012023-12-310000034067us-gaap:OperatingSegmentsMember2022-01-012022-12-310000034067us-gaap:OperatingSegmentsMember2021-01-012021-12-310000034067us-gaap:MaterialReconcilingItemsMember2023-01-012023-12-310000034067us-gaap:MaterialReconcilingItemsMember2022-01-012022-12-310000034067us-gaap:MaterialReconcilingItemsMember2021-01-012021-12-310000034067us-gaap:CorporateNonSegmentMember2022-01-012022-12-310000034067us-gaap:CorporateNonSegmentMember2021-01-012021-12-310000034067us-gaap:OperatingSegmentsMemberboom:ArcadiaSegmentMember2023-12-310000034067us-gaap:OperatingSegmentsMemberboom:ArcadiaSegmentMember2022-12-310000034067us-gaap:OperatingSegmentsMemberboom:DynaEnergeticsSegmentMember2023-12-310000034067us-gaap:OperatingSegmentsMemberboom:DynaEnergeticsSegmentMember2022-12-310000034067us-gaap:OperatingSegmentsMemberboom:NobelCladSegmentMember2023-12-310000034067us-gaap:OperatingSegmentsMemberboom:NobelCladSegmentMember2022-12-310000034067us-gaap:OperatingSegmentsMember2023-12-310000034067us-gaap:OperatingSegmentsMember2022-12-310000034067us-gaap:MaterialReconcilingItemsMember2023-12-310000034067us-gaap:MaterialReconcilingItemsMember2022-12-310000034067us-gaap:CorporateNonSegmentMember2023-12-310000034067us-gaap:CorporateNonSegmentMember2022-12-310000034067country:US2023-12-310000034067country:US2022-12-310000034067country:DE2023-12-310000034067country:DE2022-12-310000034067country:CA2023-12-310000034067country:CA2022-12-310000034067country:FR2023-12-310000034067country:FR2022-12-310000034067boom:RestOfTheWorldMember2023-12-310000034067boom:RestOfTheWorldMember2022-12-310000034067boom:ArcadiaSegmentMemberboom:WestMember2023-01-012023-12-310000034067boom:ArcadiaSegmentMemberboom:WestMember2022-01-012022-12-310000034067boom:ArcadiaSegmentMemberboom:SouthMember2023-01-012023-12-310000034067boom:ArcadiaSegmentMemberboom:SouthMember2022-01-012022-12-310000034067boom:NortheastMemberboom:ArcadiaSegmentMember2023-01-012023-12-310000034067boom:NortheastMemberboom:ArcadiaSegmentMember2022-01-012022-12-310000034067boom:MidwestMemberboom:ArcadiaSegmentMember2023-01-012023-12-310000034067boom:MidwestMemberboom:ArcadiaSegmentMember2022-01-012022-12-310000034067boom:DynaEnergeticsSegmentMembercountry:US2023-01-012023-12-310000034067boom:DynaEnergeticsSegmentMembercountry:US2022-01-012022-12-310000034067boom:DynaEnergeticsSegmentMembercountry:US2021-01-012021-12-310000034067boom:DynaEnergeticsSegmentMembercountry:CA2023-01-012023-12-310000034067boom:DynaEnergeticsSegmentMembercountry:CA2022-01-012022-12-310000034067boom:DynaEnergeticsSegmentMembercountry:CA2021-01-012021-12-310000034067country:OMboom:DynaEnergeticsSegmentMember2023-01-012023-12-310000034067country:OMboom:DynaEnergeticsSegmentMember2022-01-012022-12-310000034067country:OMboom:DynaEnergeticsSegmentMember2021-01-012021-12-310000034067country:IQboom:DynaEnergeticsSegmentMember2023-01-012023-12-310000034067country:IQboom:DynaEnergeticsSegmentMember2022-01-012022-12-310000034067country:IQboom:DynaEnergeticsSegmentMember2021-01-012021-12-310000034067country:KWboom:DynaEnergeticsSegmentMember2023-01-012023-12-310000034067country:KWboom:DynaEnergeticsSegmentMember2022-01-012022-12-310000034067country:KWboom:DynaEnergeticsSegmentMember2021-01-012021-12-310000034067country:AEboom:DynaEnergeticsSegmentMember2023-01-012023-12-310000034067country:AEboom:DynaEnergeticsSegmentMember2022-01-012022-12-310000034067country:AEboom:DynaEnergeticsSegmentMember2021-01-012021-12-310000034067country:EGboom:DynaEnergeticsSegmentMember2023-01-012023-12-310000034067country:EGboom:DynaEnergeticsSegmentMember2022-01-012022-12-310000034067country:EGboom:DynaEnergeticsSegmentMember2021-01-012021-12-310000034067boom:RestOfTheWorldMemberboom:DynaEnergeticsSegmentMember2023-01-012023-12-310000034067boom:RestOfTheWorldMemberboom:DynaEnergeticsSegmentMember2022-01-012022-12-310000034067boom:RestOfTheWorldMemberboom:DynaEnergeticsSegmentMember2021-01-012021-12-310000034067boom:NobelCladSegmentMembercountry:US2023-01-012023-12-310000034067boom:NobelCladSegmentMembercountry:US2022-01-012022-12-310000034067boom:NobelCladSegmentMembercountry:US2021-01-012021-12-310000034067boom:NobelCladSegmentMembercountry:CA2023-01-012023-12-310000034067boom:NobelCladSegmentMembercountry:CA2022-01-012022-12-310000034067boom:NobelCladSegmentMembercountry:CA2021-01-012021-12-310000034067boom:NobelCladSegmentMembercountry:CN2023-01-012023-12-310000034067boom:NobelCladSegmentMembercountry:CN2022-01-012022-12-310000034067boom:NobelCladSegmentMembercountry:CN2021-01-012021-12-310000034067country:DEboom:NobelCladSegmentMember2023-01-012023-12-310000034067country:DEboom:NobelCladSegmentMember2022-01-012022-12-310000034067country:DEboom:NobelCladSegmentMember2021-01-012021-12-310000034067currency:KRWboom:NobelCladSegmentMember2023-01-012023-12-310000034067currency:KRWboom:NobelCladSegmentMember2022-01-012022-12-310000034067currency:KRWboom:NobelCladSegmentMember2021-01-012021-12-310000034067country:AEboom:NobelCladSegmentMember2023-01-012023-12-310000034067country:AEboom:NobelCladSegmentMember2022-01-012022-12-310000034067country:AEboom:NobelCladSegmentMember2021-01-012021-12-310000034067country:SAboom:NobelCladSegmentMember2023-01-012023-12-310000034067country:SAboom:NobelCladSegmentMember2022-01-012022-12-310000034067country:SAboom:NobelCladSegmentMember2021-01-012021-12-310000034067country:FRboom:NobelCladSegmentMember2023-01-012023-12-310000034067country:FRboom:NobelCladSegmentMember2022-01-012022-12-310000034067country:FRboom:NobelCladSegmentMember2021-01-012021-12-310000034067country:ITboom:NobelCladSegmentMember2023-01-012023-12-310000034067country:ITboom:NobelCladSegmentMember2022-01-012022-12-310000034067country:ITboom:NobelCladSegmentMember2021-01-012021-12-310000034067country:SEboom:NobelCladSegmentMember2023-01-012023-12-310000034067country:SEboom:NobelCladSegmentMember2022-01-012022-12-310000034067country:SEboom:NobelCladSegmentMember2021-01-012021-12-310000034067country:BEboom:NobelCladSegmentMember2023-01-012023-12-310000034067country:BEboom:NobelCladSegmentMember2022-01-012022-12-310000034067country:BEboom:NobelCladSegmentMember2021-01-012021-12-310000034067country:BRboom:NobelCladSegmentMember2023-01-012023-12-310000034067country:BRboom:NobelCladSegmentMember2022-01-012022-12-310000034067country:BRboom:NobelCladSegmentMember2021-01-012021-12-310000034067country:NLboom:NobelCladSegmentMember2023-01-012023-12-310000034067country:NLboom:NobelCladSegmentMember2022-01-012022-12-310000034067country:NLboom:NobelCladSegmentMember2021-01-012021-12-310000034067boom:NobelCladSegmentMembercountry:GB2023-01-012023-12-310000034067boom:NobelCladSegmentMembercountry:GB2022-01-012022-12-310000034067boom:NobelCladSegmentMembercountry:GB2021-01-012021-12-310000034067country:AUboom:NobelCladSegmentMember2023-01-012023-12-310000034067country:AUboom:NobelCladSegmentMember2022-01-012022-12-310000034067country:AUboom:NobelCladSegmentMember2021-01-012021-12-310000034067country:INboom:NobelCladSegmentMember2023-01-012023-12-310000034067country:INboom:NobelCladSegmentMember2022-01-012022-12-310000034067country:INboom:NobelCladSegmentMember2021-01-012021-12-310000034067country:RUboom:NobelCladSegmentMember2023-01-012023-12-310000034067country:RUboom:NobelCladSegmentMember2022-01-012022-12-310000034067country:RUboom:NobelCladSegmentMember2021-01-012021-12-310000034067boom:RestOfTheWorldMemberboom:NobelCladSegmentMember2023-01-012023-12-310000034067boom:RestOfTheWorldMemberboom:NobelCladSegmentMember2022-01-012022-12-310000034067boom:RestOfTheWorldMemberboom:NobelCladSegmentMember2021-01-012021-12-310000034067us-gaap:CustomerConcentrationRiskMemberus-gaap:RevenueFromContractWithCustomerMemberboom:OneCustomerMember2023-01-012023-12-310000034067us-gaap:AccountsReceivableMemberus-gaap:CustomerConcentrationRiskMemberboom:OneCustomerMember2023-01-012023-12-310000034067us-gaap:AccountsReceivableMemberus-gaap:CustomerConcentrationRiskMemberboom:OneCustomerMember2022-01-012022-12-310000034067us-gaap:ForeignExchangeForwardMember2023-12-310000034067us-gaap:ForeignExchangeForwardMember2022-12-310000034067us-gaap:ForeignExchangeForwardMember2023-01-012023-12-310000034067us-gaap:ForeignExchangeForwardMember2022-01-012022-12-310000034067us-gaap:ForeignExchangeForwardMember2021-01-012021-12-310000034067boom:MayorgaVArcadiaIncMemberus-gaap:PendingLitigationMemberboom:ArcadiaMember2023-12-310000034067us-gaap:PendingLitigationMemberboom:MayorgaVArcadiaIncAndFelipeVArcadiaIncMemberboom:ArcadiaMember2023-12-310000034067boom:MayorgaVArcadiaIncMemberus-gaap:PendingLitigationMemberboom:ArcadiaMember2023-01-012023-12-3100000340672023-01-152023-01-150000034067us-gaap:LineOfCreditMemberboom:CreditAgreementFacilityMemberus-gaap:SubsequentEventMember2024-02-050000034067us-gaap:LineOfCreditMemberboom:CreditAgreementFacilityMemberus-gaap:SubsequentEventMember2024-02-060000034067us-gaap:RevolvingCreditFacilityMemberboom:CreditAgreementFacilityMemberus-gaap:SubsequentEventMember2024-02-060000034067boom:CreditAgreementFacilityMemberus-gaap:SubsequentEventMemberboom:TermLoanFacilityMember2024-02-060000034067boom:CreditAgreementFacilityMemberus-gaap:SubsequentEventMemberboom:DelayedDrawTermLoanFacilityMember2024-02-060000034067boom:CreditAgreementFacilityMemberus-gaap:SubsequentEventMember2024-02-060000034067boom:ArcadiaProductsLLCMemberus-gaap:SubsequentEventMember2024-02-23iso4217:BNDiso4217:VND00000340672023-10-012023-12-31


UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
WASHINGTON, D.C. 20549
 
Form 10-K
 (Mark One)
 
      ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES AND EXCHANGE ACT OF 1934

For the fiscal year ended December 31, 2023
 

         TRANSITION REPORT UNDER SECTION 13 OR 15(d) OF THE SECURITIES ACT OF 1934

FOR THE TRANSITION PERIOD FROM                   TO                  
 
Commission file number 001-14775

 DMC Global Inc.
(Exact name of Registrant as Specified in its Charter)
Delaware 84-0608431
(State of Incorporation or Organization) (I.R.S. Employer Identification No.)
11800 Ridge Parkway, Suite 300, Broomfield, Colorado 80021
(Address of principal executive offices, including zip code)
 
(303) 665-5700
(Registrant’s telephone number, including area code)

 
Securities registered pursuant to Section 12(b) of the Act:
 
Title of each classTrading Symbol Name of each exchange on which registered
Common Stock, $.05 Par ValueBOOM The Nasdaq Global Select Market

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.
Yes  o  No x

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Act from their obligations under those sections. Yes  o  No x

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.  Yes  x  No  o
 
Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes  x  No  o
 
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and "emerging growth company" in Rule 12b-2 of the Exchange Act. 
Large accelerated filer o
 
Accelerated Filer x
   
Non-accelerated filer o
 
Smaller reporting company
Emerging growth company

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. o

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report.

If securities are registered pursuant to Section 12(b) of the Act, indicate by check mark whether the financial statements of the registrant included in the filing reflect the correction of an error to previously issued financial statements.

Indicate by check mark whether any of those error corrections are restatements that required a recovery analysis of incentive-based compensation received by any of the registrant’s executive officers during the relevant recovery period pursuant to §240.10D-1(b).

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 under the Act).  Yes    No x
 
The approximate aggregate market value of the voting stock held by non-affiliates of the registrant was $343,226,776 as of June 30, 2023.

The number of shares of Common Stock outstanding was 19,786,188 as of February 20, 2024.

Certain information required by Items 10, 11, 12, 13 and 14 of Form 10-K is incorporated by reference into Part III hereof from the registrant’s proxy statement for its 2024 Annual Meeting of Stockholders, which is expected to be filed with the Securities and Exchange Commission (“SEC”) within 120 days of the close of the registrant’s fiscal year ended December 31, 2023.




TABLE OF CONTENTS
 
  Page
 
 



Table of Contents
PART I

Forward-Looking Statements
 
This Annual Report on Form 10-K and the documents incorporated by reference into it contain certain forward-looking statements within the meaning of the safe harbor provisions of the Private Securities Litigation Reform Act of 1995 (the "Reform Act"). Words such as “anticipates,” “expects,” “intends,” “plans,” “believes,” “seeks,” “estimates,” “may,” “will,” “continue,” “project,” “forecast,” and similar expressions, as well as statements in the future tense, identify forward-looking statements. Statements addressing events or developments that we expect or anticipate will occur in the future, including statements relating to our future operating performance, any of our businesses’ future financial and operational growth or technical and product expansions, the result and timing of the strategic review process for our businesses, the potential acquisition of the 40% minority interest in Arcadia Products, LLC ("Arcadia Products"), expected benefits from enhancements to our systems and applications, our backlog and anticipated future sales and market share, as well as statements expressing optimism or pessimism about future operating results, are forward-looking statements within the meaning of the Reform Act.

Forward-looking statements are not guarantees of our future performance and are subject to risks and uncertainties that could cause actual results to differ materially from the results contemplated by the forward-looking statements. These risks and uncertainties include those relating to:

Changes in global economic conditions;
The ability to obtain new contracts at attractive prices;
The size and timing of customer orders and shipments;
Product pricing and margins;
Our ability to realize sales from our backlog and our ability to adjust our manufacturing and supply chain;
Fluctuations in customer demand;
Our ability to manage periods of growth and contraction effectively;
General economic conditions, both domestic and foreign, impacting our business and the business of the end-market users we serve;
Competitive factors;
The timely completion of contracts;
The timing and size of expenditures;
The timely receipt of government approvals and permits;
The price and availability of metal and other raw materials;
The adequacy of local labor supplies at our facilities;
Current or future limits on manufacturing capacity at our various operations;
The impact of catastrophic weather events on our business and that of our customers;
Our ability to successfully integrate acquired businesses;
The ability to complete a sale, a merger or other business combination of a portion of DMC’s business-unit assets, and/or a strategic investment;
The ability to remain an innovative leader in our fields of business;
The costs and impacts of pending or future litigation or regulatory matters;
Changes to legislation, regulation or public sentiment related to our business and the industries in which our customers operate;
1

Table of Contents
The impacts of trade and economic sanctions or other restrictions imposed by the European Union, the United States or other countries;
Costs and risks associated with compliance with laws and regulations, including the United States Foreign Corrupt Practices Act (“FCPA”) and similar legislation;
The availability and cost of funds; and
Fluctuations in foreign currencies.
The effects of these factors are difficult to predict. New factors emerge from time to time, and we cannot assess the potential impact of any such factor on our business or the extent to which any factor, or combination of factors, may cause results to differ materially from those contained in any forward-looking statement. All forward-looking statements speak only as of the date of this annual report, and we do not undertake any obligation to update any forward-looking statement to reflect events or circumstances after the date of such statement or to reflect the occurrence of unanticipated events. In addition, readers of this Annual Report on Form 10-K should refer to Part I, Item 1A — Risk Factors for a discussion of these and other factors that could materially affect our results of operations and financial condition.

ITEM 1.                                                Business
 
References made in this Annual Report on Form 10-K to “we”, “our”, “us”, “DMC”, "DMC Global" and the “Company” refer to DMC Global Inc. and its consolidated subsidiaries. Unless stated otherwise, all dollar figures in this report are presented in thousands (000s).

Overview
 
DMC Global Inc. (“DMC”, "we", "us", "our", or the "Company") owns and operates Arcadia Products, DynaEnergetics and NobelClad, three innovative, asset-light manufacturing businesses that provide differentiated products and engineered solutions to segments of the construction, energy, industrial processing and transportation markets. Arcadia Products supplies architectural building products, including exterior and interior framing systems, windows, curtain walls, storefronts, doors, and interior partitions to the commercial construction market; it also supplies customized windows and doors to the ultra-high-end residential construction market. DynaEnergetics designs, manufactures and sells highly engineered products utilized by the global oil and gas industry principally for the perforation of oil and gas wells. NobelClad is a leader in the production of explosion-welded clad metal plates for use in the construction of corrosion resistant industrial processing equipment, as well as specialized transition joints for use in construction of commuter rail cars, ships, and liquified natural gas (LNG) processing equipment.

Arcadia Products uses a network of service centers and distributors throughout the United States to sell its products, while DynaEnergetics and NobelClad operate globally through an international network of manufacturing, distribution and sales facilities. Refer to Note 10 within Part II, Item 8 — Financial Statements and Supplementary Data for net sales, operating income, and total assets for each of our segments.

Our Strategy

Our strategy is to maximize the value of our company by capitalizing on the unique strengths of each of our three businesses. Arcadia Products, which has established a differentiated business model within the commercial and residential building products industry, serves a large addressable market and is seeking to grow its position in its targeted U.S. markets. DynaEnergetics and NobelClad each have established leadership positions in their segments of the energy and industrial equipment industries, and both have opportunities for additional growth while maintaining high rates of cash flow conversion.

In January 2023, we announced management changes resulting in the appointment of Michael Kuta and David Aldous as interim co-President and Chief Executive Officers. On August 4, 2023, our board of directors (the "Board") appointed Michael Kuta as President and Chief Executive Officer and a director. David Aldous remains a member of the Board and was re-appointed as Chairman effective August 4, 2023. Eric Walter was appointed as our new Chief Financial Officer in February 2023, and Arcadia Products named James Chilcoff as its new President in January 2023. We also appointed two new independent directors to the Board in 2023, with Ouma Sananikone appointed in August and James O'Leary appointed in November.

2

Table of Contents
Near-term priorities for the new leadership team include positioning Arcadia for growth, strengthening the profitability of DynaEnergetics, achieving commercial success with new products introduced by NobelClad, and improving our overall cash flow through more effective working capital management and targeted cost reductions. We expect Arcadia Products to be the primary driver of DMC’s future financial and operational growth, reflecting its large addressable market and differentiated business model. Arcadia Products is investing in new digital technologies and manufacturing capacity to facilitate its expansion. Additional aluminum painting capacity was added in the second half of 2023, and the business expects further expansions in painting and anodizing capacity in 2024. We recently amended our credit facility, which increases our borrowing capacity and is intended to provide the financial flexibility to purchase the remaining 40% of Arcadia.

On January 29, 2024, we announced that the Board of Directors initiated a review of strategic alternatives for our DynaEnergetics and NobelClad businesses to maximize value for shareholders and other stakeholders. The Board is overseeing the assessment process, including options for a sale, a merger or other business combination involving one or both businesses. The Board has not set a timetable to complete the strategic review process, and there can be no assurance that the review process will result in any transactions. The process of exploring strategic alternatives will involve the dedication of significant resources and the incurrence of significant costs and expenses.

Business Segments

Arcadia Products

Arcadia Products provides architectural building products to the U.S. construction industry through three divisions: Arcadia, which serves the commercial exteriors market; Wilson Partitions, which serves the commercial interiors market; and Arcadia Custom, which serves the high-end residential market.

Arcadia

Arcadia designs, engineers, fabricates and finishes aluminum framing systems, windows, curtain walls, storefronts and entrance systems for the commercial exteriors market. It operates an integrated “hub and satellite” model in which light manufacturing, anodizing and painting of aluminum components are performed in Vernon, California, and the resulting products are shipped to a network of service centers located in growing markets throughout the western and southwestern United States. Products are designed to address regional needs and preferences, and each satellite seeks to offer superior product availability, short lead times, product customization, and design and engineering support. Arcadia serves a loyal customer base consisting primarily of local and regional glazing contractors, subcontractors, commercial architects and designers. In 2023, Arcadia accounted for approximately 69% of the net sales of Arcadia Products.

Wilson Partitions

Wilson Partitions serves the commercial interior framing and partitions markets across the U.S., providing framing systems, aluminum doors, sliding systems and glazing systems. Wilson Partitions is supported by centralized manufacturing facilities in California, as well as support facilities in Connecticut and Texas. Its products address both new construction and repairs and remodels; and product capabilities include noise control, fire rating, built-to-order custom finishes, and other functional and aesthetic features. In 2023, Wilson Partitions accounted for approximately 10% of the net sales of Arcadia Products.

Arcadia Custom

Arcadia Custom serves the ultra-high-end residential real estate market throughout the United States, and is supported by manufacturing facilities in California, Arizona and Connecticut. It provides a broad offering of custom, fully fabricated aluminum, steel and wood windows and doors to luxury homes and mixed-use markets. Arcadia Custom works closely with architects, owners, contractors and installers to provide support throughout the planning, design and installation phases of a residential construction process. In 2023, Arcadia Custom accounted for approximately 21% of the net sales of Arcadia Products.

Environmental Sustainability

Arcadia Products’ operations have an ongoing focus on environmental sustainability, including hazardous waste recycling and initiatives aimed at reducing waste. All of Arcadia’s commercial building products and many of our residential product offerings are made from aluminum, including recycled aluminum content. A significant portion of Arcadia Custom’s
3

Table of Contents
residential projects use stainless steel (the most recycled building material in the world), and most of its steel products are recyclable.

Many of our architectural products help architects, developers, and building owners achieve their energy-efficiency and sustainability goals by improving energy performance, thereby reducing greenhouse gas emissions, providing daylight and natural ventilation, and increasing comfort and safety for occupants. Arcadia Products offers high-performance products that comply with the Leadership in Energy and Environmental Design (LEED) Green Building Rating System. In addition, we offer renovation solutions to help modernize aging buildings, providing significantly improved energy performance. Arcadia Products is committed to continuing to improve the energy efficiency of products for our customers.

Operations

Arcadia Products is headquartered in Vernon, California, and operates four manufacturing facilities and 11 fabrication and distribution facilities. Anodized and painted aluminum components for all Arcadia Products divisions are manufactured in Vernon, with additional painting and manufacturing capacity in its Tucson, Arizona, and Connecticut facilities.
    
During the years ended December 31, 2023 and 2022, Arcadia Products represented approximately 42% and 46% of our consolidated net sales, respectively.

Products

The Arcadia division manufactures, assembles and sells aluminum window and door systems, as well as architectural components. These include architectural framing systems, windows, curtain walls, entrance systems and sun control products. Our product offerings allow architects to create distinctive looks for buildings such as office towers, airports, hotels, education and athletic facilities, health care locations, government buildings, retail centers, mixed use and multi-family residential buildings, while also meeting functional requirements such as energy efficiency, hurricane, blast and other impact resistance and/or sound control.

Wilson Partitions manufactures and sells door framing systems, aluminum doors, sliding systems and glazing systems.

Arcadia Custom designs and manufactures thermally broken steel and aluminum windows and doors and custom wood doors and windows.

We offer product warranties that we believe are competitive for the markets in which our products are sold. The nature and extent of these warranties depend upon the product, the market and, in some cases, the customer being served.

Suppliers and Raw Materials

Materials used in Arcadia and Wilson Partition's commercial products include aluminum extrusions, both finished and unfinished, paint and hardware. Materials used in Arcadia Custom's residential products include aluminum, steel, wood, paint, fabricated glass and hardware. The availability, quality, and costs of many of these commodities have fluctuated, and may continue to fluctuate, over time and are primarily sourced in North America. Generally, we have been able to address raw material price increases in our product pricing to customers. The results of our operations can be impacted by a delay between the time of a raw material cost increase and our price capture.

Aluminum is our most important raw material, and we currently have the ability to source from several major suppliers. Our other raw materials are readily available from a variety of domestic sources. We generally have good relationships with our suppliers and strive to proactively manage raw material availability and pricing.

Competition

Arcadia and Wilson Partitions

The North American exterior and interior commercial construction markets are highly fragmented. Competitive factors include price, product quality, product attributes and performance, reliable service, regional satellites, local availability, lead-time, on-time delivery, project management, technical engineering and design services. To protect and enhance our competitive position, we maintain strong relationships with our customers and strive to provide value to all persons in the value chain. There is a great deal of competition in the North American commercial window, storefront and partition manufacturing industry, and
4

Table of Contents
the Arcadia and Wilson Partition divisions compete against several national, regional and local manufacturers, as well as regional paint and anodizing finishing companies.

We believe Arcadia’s and Wilson Partitions’ low-cost manufacturing platform, supply chain management, broad product offering, product quality and availability, short lead times and highly diversified and long-tenured customer base, create significant competitive advantages relative to many other exterior and interior building products manufacturers.

Arcadia Custom

Arcadia Custom faces competition nationally from several large, well-known competitors and from many smaller, regional competitors. Competitive factors include product quality and design, aesthetics, dealer relationships and relationships with architects and luxury home builders.

Marketing, Sales, Distribution

The Arcadia division relies on a reputation for strong customer service, quality products and competitive lead times to maintain and attract customers. It has strong relationships with local glaziers, installers and subcontractors.

Wilson Partitions sells through a national in-house sales force and external sales representatives.

Arcadia Custom’s sales strategy focuses on direct selling through a national internal sales team and select dealer network that market our products to architects and luxury home builders. The sales network focuses on attracting and retaining dealers by striving to consistently provide exceptional customer service, leading product designs and quality, technical expertise and competitive pricing.

Ownership and Management

Following the closing of the Arcadia Products acquisition in December 2021, DMC (through its direct ownership and indirect ownership through our subsidiary DMC Korea) owns 60% of Arcadia Products and the remaining 40% is owned by New Arcadia Holdings, Inc., which is wholly-owned by Synergex Group LLC, Trustee of the Munera Family ESBT, and previously the majority owner of Arcadia, Inc. (“Munera”). Arcadia Products is governed by an Operating Agreement among the Company, Arcadia Products and Munera (the “Operating Agreement”). Pursuant to the Operating Agreement, the Company has the right to appoint four directors to Arcadia Products’ board of directors (the “Arcadia Board”), one of whom will serve as Chairman of the Arcadia Board, and Munera has the right to appoint three directors. If Munera’s ownership in Arcadia Products declines, the number of directors it has the right to appoint will be reduced in the manner set forth in the Operating Agreement. The Arcadia Board generally acts by majority vote of the directors, but certain matters specified in the Operating Agreement require the affirmative vote of 80% of the directors.

At any time at or after the third anniversary of the effective date of the Operating Agreement, Munera shall have the right (but not the obligation) to require the Company to purchase (the “Put Option”) its interests in Arcadia Products for a price based on the higher of (a) a value based on the Acquisition purchase price and (b) a multiple of Arcadia Products’ average EBITDA for the preceding two fiscal years and its projected EBITDA for the then-current fiscal year (the “Option Purchase Price”), and the Company shall have the right (but not the obligation) to purchase all of Munera’s interests for the same price (the “Call Option”). If the Put Option is exercised, the Option Purchase Price will be paid, at DMC’s option, (i) in cash or (ii) 20% in cash and 80% in shares of preferred stock of the Company. If the Company exercises the Call Option, the Option Purchase Price will be paid in cash. The Operating Agreement also provides for rights of first refusal and “drag-along” rights pursuant to which we could, in certain circumstances, acquire Munera’s interests prior to the third anniversary of the effective date of the Operating Agreement.

DynaEnergetics

DynaEnergetics designs, manufactures, markets and sells perforating systems and associated hardware for the global oil and gas industry. During the well drilling process, steel casing is inserted into the well and cemented in place to isolate and support the integrity of the wellbore. A perforating system, which contains a series of specialized explosive shaped charges, is used to punch holes through the casing and cement liner of the well and into the geologic formation surrounding the well bore. The channels created by the shaped charges allow hydrocarbons to flow back into the wellbore. When hydraulic fracturing is employed, the perforations and channels also provide a path for the fracturing fluid to enter and return from the formation.

5

Table of Contents
In unconventional wells, multiple perforating systems, which generally range from seven inches to three feet in length, are connected end-to-end into a perforating “string.” The string is lowered into the well and then pumped by fluid across the horizontal lateral to the target location within the shale formation. When the perforating system is initiated via an electronic or digital signal from the surface, the shaped charges detonate. DynaEnergetics designs, manufactures and sells all five primary components of a perforating system: the initiation system, shaped charges, detonating cord, gun hardware, and a control panel.

In North America’s well-completion industry, perforating components traditionally have been assembled by highly trained personnel at the well site or nearby assembly facility. In 2015, DynaEnergetics began assembling its perforating systems in a controlled environment at its manufacturing facilities. The systems, marketed as DynaStage® (DS) Factory-Assembled, Performance-Assured™ perforating systems, are shipped directly to the customers’ remote shop or well site. Since 2015, DynaEnergetics has added several new DS products to accommodate evolving industry conditions and needs.

Operations

The DynaEnergetics segment seeks to build on its products and technologies, as well as its sales, supply chain and distribution network. During the three years ended December 31, 2023, 2022 and 2021, the DynaEnergetics segment represented approximately 44%, 40% and 67% of our consolidated net sales, respectively.

DynaEnergetics’ operates manufacturing facilities in Germany and the United States. In Troisdorf, Germany, DynaEnergetics has six integrated detonator manufacturing lines, two shaped charge lines and a detonating cord manufacturing line. In Liebenscheid, Germany, DynaEnergetics operates a manufacturing facility for perforating guns and associated hardware. In the United States, DynaEnergetics has three shaped charge manufacturing lines in Blum, Texas where product assembly and metal fabricating also occur. We have a second metal fabricating facility in Whitney, Texas. These locations provide us with global capacity for shaped charge and perforating gun production and enhance our delivery and customer service capabilities in our key markets.

Products

IS2: DynaEnergetics has focused on the advancement of safe and selective perforating products for use in North America’s shale, or onshore, unconventional, oil and gas industry. Among these products are the IS2™ Intrinsically Safe Initiating Systems, which include the IS2TM Customer Assembled (CA) detonator and the wire-free, plug-in, IS2 Top Fire (TF) detonator. The IS2 TF detonator is the key enabling technology in DynaEnergetics’ family of DS Factory-Assembled, Performance-Assured perforating systems. The IS2 detonators require a specific digital code for firing and are immune from induced currents and voltages, static electricity and high-frequency irradiation. These safety features substantially reduce the risk of unintentional detonation and enable concurrent perforating and hydraulic fracturing operations at well sites with multiple wellbores, improving operating efficiencies for customers. In response to the exacting needs of our customers, we expanded and enhanced the IS2 product line, including adding an IS2 MS igniter specifically designed for our DS MicroSet™ as well as an upgrade of all IS2 detonators to the more proficient IS2 Express which provides improved performance through a more intuitive automated firing panel process. In 2023, we introduced a new and improved generation of our intrinsically safe detonator, the IS3. This more technically advanced and compact detonator was developed internally to provide the platform for the next generation of DS systems.

DS Systems: Our DS InfinityTM Factory-Assembled, Performance-Assured perforating systems combine all of our advanced technologies into a preassembled perforating gun that is armed at the well site with our Plug-and-Go™ IS2 TF detonator. The IS2 TF detonator is wire-free and eliminates the customary process of wiring the detonator into the perforating system at the well site. All DS systems are operated using our in-house designed and manufactured InfinityTM Control Panel. The Infinity Panel is highly intuitive and allows the gun string to be safely tested and monitored throughout the pump-down operation. The system also incorporates a shot detection function resulting in significant time and cost savings. Recent design advancements to the IS2 line of initiation products enable customers to safely and reliably fire up to 100 systems and set a plug in a single run. All DS systems can be tested before going down hole using our Infinity Surface Tester, reducing the risk of lost time, mishaps, misruns and misfires due to a system fault.

DynaEnergetics has successfully expanded the family of DS perforating systems with various models: DS Echo™, for re-frac applications; DS LoneStar™, a single-shot system that delivers large, ultra-consistent entry holes, and DS NLine™, an oriented systems that features several shaped charges on a lateral plane. During 2022, DynaEnergetics continued to refine its systems to further improve reliability and worked to expand our product offerings. In 2023, we launched DS Gravity 2.0™, a next generation self orientating system for oriented perforating and DS NLine 2.0, which includes an improved alignment system for oriented perforating. Both systems utilize the latest generation IS3 detonator.

6

Table of Contents
Shaped Charges: DynaEnergetics develops and sells a wide range of shaped charges for use in its perforating systems, including the LoneStar and EchoFrac™ charges specifically designed for sale in their respective systems. DynaEnergetics also sells HaloFrac™ charges, which incorporate advancements in liner materials and shaped charge geometry to improve hydraulic fracturing performance, the FracTune™ family of shaped charges, which delivers uniform hole diameter in the well casing independent of shot phasing and gun positioning within the well bore, and the DPEX™ family of charges, which feature energetic liners. All three charge lines can be used with the DS perforating system as well as conventional perforating gun systems across a range of gun diameters. In 2023, DynaEnergetics expanded on its portfolio of equal-entry hole shaped charges through the introduction of Oriented FracTune™, an improved oriented equal entry hole product designed to address the precise requirements of oriented perforating applications in the plug and perforating market. These charges enable exploration and production companies and their wireline service providers to choose from a variety of specifically designed shaped charges to match well completion design requirements.

TCP Systems: DynaEnergetics Tubing Conveyed Perforating ("TCP") systems are customized for individual customer needs and well applications. TCP enables perforating of conventional vertical wells, as well as highly deviated and horizontal wells. These types of wells are increasingly being drilled by the off-shore industry and in applications outside the U.S. TCP tools also perforate long intervals in a single trip, which significantly improves rig efficiency. Our TCP tool range includes mechanical and hydraulic firing systems, gun releases, redundant firing heads, under-balancing devices and auxiliary components. Our tools are designed to withstand down-hole temperatures of up to 260 degrees Celsius (500 degrees Fahrenheit) for safe and quick assembly at the well site and to allow unrestricted total system length.

Setting and Ballistic Release Tools: DynaEnergetics also sells products that perform critical down-hole functions associated with the perforating process. DS MicroSet™ is a compact, disposable setting tool used to install the fracking plugs that isolate stages in a multi-stage, unconventional oil or gas well. In 2023, we launched DS Liberator™ 2.0, which is a newly designed ballistic release tool which enables wireline service companies to disengage from a perforating string that has become stuck in the well bore.

Plug and Abandonment: Our DynaSlotTM perforating system is designed for plug and abandonment (P&A) operations. During well abandonment, the wellbore is encased and permanently sealed so that layers of sedimentary rock, and in particular freshwater aquifers, are pressure isolated from each other and the wellbore. The DynaSlot perforating system facilitates this process by creating access to a full 360-degree area between the rock formations and the tubing and/or casing. Customers use the unique helical perforation pattern created by DynaSlot to perform cement squeeze operations that seal off the wellbore. DynaEnergetics maintains its DPU and XPU shaped charge lines, which are designed for P&A and well remediation applications and enable perforating through two or more layers of casing and into the formation. DynaEnergetics also has successfully developed an encapsulated DynaSlot charge specifically designed for cutting down hole control lines. Most recently, DynaEnergetics developed its next generation DynaSlot shaped charges, designed specifically for severing and cutting flat-pack control lines, which are mounted vertically behind the wellbore tubulars. Cutting control-lines without damaging the well's integrity is a critical step in the process of permanently decommissioning offshore wells.

Suppliers and Raw Materials

DynaEnergetics' product offering consists of complex components that require numerous high-end inputs. DynaEnergetics utilizes a variety of raw materials for the production of oilfield perforating products, including high-quality steel tubes, steel and copper, explosives, granulates, plastics and ancillary plastic product components. DynaEnergetics obtains its raw materials from a number of different producers in Germany, other European countries, and the U.S., but also purchases materials from other international suppliers.

Competition

DynaEnergetics faces competition from independent manufacturers of perforating products and from the industry's three largest oil and gas service companies, which produce perforating systems for their own use and also buy systems and other perforating components and specialty products from independent suppliers such as DynaEnergetics. We compete for sales primarily on customer service, product quality, reliability, safety, performance, and price.

Customer Profile

DynaEnergetics' perforating and seismic products are purchased by international and U.S. oilfield service companies of all sizes working in both onshore and offshore oil and gas fields. Our customers select perforating products based on their leading performance, system compatibility, product pricing, and ability to address a broad spectrum of factors, including pressures and temperatures in the wellbore and geological characteristics of the targeted formation.
7

Table of Contents

The customers for our energy products can be divided into four broad categories: purchasing centers of large service companies, international service companies, independent international and North America-based service companies (often referred to as “wireline” companies), and local resellers.

Marketing, Sales, Distribution

DynaEnergetics’ worldwide marketing and sales efforts for its oilfield products are managed from Troisdorf, Germany and Houston, Texas. DynaEnergetics’ sales strategy focuses on direct selling, distribution through licensed distributors and independent sales representatives, education of current and prospective service-company customers about our products and technologies, and education of E&P companies about the benefits of our products and technologies in an effort to generate pull-through demand. Currently, DynaEnergetics sells its oilfield and seismic products through wholly owned affiliates in Germany, the U.S., and Canada, and through independent sales agents in other parts of the world. DynaEnergetics serves the Americas region through its network of sales and distribution centers in the United States and Canada. In 2023, DynaEnergetics continued to upgrade its website and mobile applications for an improved customer experience. Additional enhancements are expected in future periods.

DynaEnergetics also designs and manufactures customized perforating products for third-party customers according to their designs and requirements.
Research and Development

DynaEnergetics devotes substantial resources to its research and development (R&D) programs. Based predominantly in Troisdorf, Germany, the R&D team works closely with sales, product management, and operations management teams to establish priorities and effectively manage individual projects. Through its ongoing involvement in oil and gas industry trade shows and conferences, DynaEnergetics maintains a strong profile in the oil and gas industry. In addition to its existing shaped charge test facility, which can simulate down-hole, wellbore, and reservoir pressure conditions to develop and test high performance perforating charges for both oil companies and service providers, the R&D group has a purpose-built pressure vessel which can reach 30,000 psi test pressures and be heated to up to 200 degrees Celsius (392 degrees F). This enables the R&D group to support the oil and gas industry with test methods for new products that realistically simulate potentially difficult down-hole conditions. In 2023, we continued construction of our horizontal test loop at our Blum, Texas facility. Upon completion in 2024, this significant investment will allow the testing of our perforating systems in an environment mimicking down-hole flow conditions, which should enhance our development and testing programs. An R&D plan, which focuses on new technology, products, process support and contracted projects, is prepared and reviewed at least quarterly. R&D costs were $5,610, $5,712, and $6,378 for the years ended December 31, 2023, 2022 and 2021, respectively.

NobelClad

Explosion-welded cladding technology is a method for welding metals that cannot be joined using conventional welding processes, such as titanium-steel, aluminum-steel, and aluminum-copper. Explosion welding also can be used to weld compatible metals, such as stainless steels and nickel alloys to steel. The cladding metals are typically titanium, stainless steel, aluminum, copper alloys, nickel alloys, tantalum, and zirconium. The base metals are typically carbon steel, alloy steel, stainless steel and aluminum.

Explosion-welded clad metal is produced as flat plates or concentric cylinders, which can be further formed and fabricated into a broad range of industrial processing equipment or specialized transition joints. Created using a robust cold-welding technology, explosion-welded clad products exhibit high bond strength, which is generally stronger than the parent metals. The dimensional capabilities of the process are broad: cladding metal layers can range from a few thousandths of an inch to several inches in thickness and base metal thickness and lateral dimensions are primarily limited by the capabilities of the world’s metal production mills.

Clad metal plates are used in the construction of heavy, corrosion resistant pressure vessels and heat exchangers. Clad metal plates consist of a thin layer of an expensive, corrosion-resistant clad metal, such as titanium or nickel alloy, which is metallurgically welded to a less expensive structural backing metal, such as carbon steel. For heavy equipment, clad plates generally provide an economical alternative to building the equipment solely out of a corrosion-resistant alloy. While a significant portion of the demand for our clad metal products is driven by maintenance and retrofit projects at existing chemical processing, petrochemical processing, oil refining, and aluminum smelting facilities, new plant construction and large plant expansion projects also account for a significant portion of total demand. These industries tend to be cyclical in nature, and the timing of new order inflow remains difficult to predict.
8

Table of Contents

Clad Metal End-Use Markets
 
The eight broad industrial sectors discussed below comprise the bulk of demand for NobelClad’s products, with oil and gas and chemical and petrochemical constituting approximately 70% of NobelClad sales in 2023. This demand is driven by the underlying need for both new equipment and facility maintenance in these primary market sectors.

Oil and Gas: Oil and gas end use markets include both oil and gas production and petroleum refining. Oil and gas production covers a broad scope of operations related to recovering oil and/or gas for subsequent processing in refineries. Clad metal is used in separators, glycol contractors, pipelines, heat exchangers and other related equipment. Clad equipment is also advantageous for oil and gas production from deep, hot, and more corrosive fields. The primary clad metals for the oil and gas production market are stainless steel and nickel alloys clad to steel, with some use of reactive metals such as titanium.

Petroleum refining processes frequently are corrosive and operate at high temperatures and pressures. Clad metal is extensively used in a broad range of equipment including desulfurization hydrotreaters, coke drums, distillation columns, separators and heat exchangers. Reliance upon low-quality, high-sulfur crude drives demand for new corrosion resistant equipment. Regulatory controls of sulfur emissions in gas, diesel and jet fuel also impact the need for clad equipment. Like the upstream oil and gas sector, the clad metals are primarily stainless steel and nickel alloys.

Chemical and Petrochemical: Many common products, ranging from plastics to prescription drugs to electronic materials, are produced by chemical processes. Because the production of these items often involves corrosive agents and is conducted under high pressures or temperatures, corrosion resistant equipment is needed. One of the larger applications for clad equipment is in the manufacture of purified terephthalic acid (PTA), a precursor product for polyester, which is used in products as diverse as carpets and plastic bottles. The chemical market requires extensive use of stainless steel and nickel alloys, but also uses titanium, zirconium and tantalum.

Alternative Energy: Some alternative energy technologies involve conditions that necessitate clad metals. Solar panels predominantly incorporate high purity polysilicon. Processes for manufacturing high purity silicon utilize a broad range of highly corrosion-resistant clad alloys. Many geothermal fields are corrosive, requiring high alloy clad separators to handle the hot steam. In addition, some ethanol technologies and concentrating solar power technologies may require corrosion resistant metals at thicknesses where clad is an attractive alternative.

Hydrometallurgy: The processes for production of nickel, gold, and copper involve acids, high pressures, and high temperatures, and titanium-clad plates are used extensively for construction of associated leaching and peripheral equipment such as autoclaves.

Aluminum Production: Primary aluminum is reduced from its oxide in large electric smelters called potlines. The electric current is carried via aluminum conductors. The electricity must be transmitted into steel components for the high temperature smelting operations. Aluminum cannot be welded to steel conventionally. Explosion-welded aluminum-steel transition joints provide an energy efficient and highly durable solution for making these connections. Modern potlines use a large number of transition joints, which are typically replaced after approximately five years in service. Although primary aluminum production is the major electrochemical application for NobelClad products, there are a number of other electrochemical applications including production of zinc, magnesium, chlorine and chlorate. We are seeing an increase for equipment related to processing biomass feedstocks and biofuel end products, mostly stainless and nickel alloy clad.

Shipbuilding: The combined problems of corrosion and top-side weight drive demand for our aluminum-steel transition joints, which serve as the juncture between a ship's upper and lower structures. Top-side weight is often a significant problem with tall ships, including cruise ships, naval vessels, ferries and yachts. Use of aluminum in the upper structure and steel in the lower structure provides stability. Since aluminum cannot be welded directly to steel using conventional welding processes, and since bolted joints between aluminum and steel corrode quickly in seawater, explosion-welded transition joints are a common solution.

Power Generation: Fossil fuel and nuclear power generation plants require extensive use of heat exchangers, many of which require corrosion resistant alloys to handle low quality cooling water. Our clad plates are used for heat exchanger tube sheets, and the largest clad tube sheets are used in the final low-pressure condensers. For most coastal and brackish water-cooled plants, titanium is the metal of choice, and titanium-clad tube sheets are the low-cost solution for power plant condensers.

9

Table of Contents
Industrial Refrigeration: Heat exchangers are a core component of refrigeration systems. When the cooling fluid is seawater, brackish, or even slightly polluted, corrosion-resistant metals are necessary. Metal selection can range from stainless steel to copper alloy to titanium. Explosion-welded clad metal is often the low-cost solution for making the tube sheets. Applications range from refrigeration chillers on fishing boats to massive air conditioning units for skyscrapers, airports, and deep underground mines.

New Applications/Industry Development

NobelClad continues its efforts in applications and materials innovations, with the goal of expanding NobelClad’s end-use markets and customer base. Examples of these efforts include the development of a new application of clad in the production of engineered wood, development of improved electrical transition joints for smelting applications, high-pressure refractory metals chemical processing pipe systems and cryogenic joints to LNG and air separation units. NobelClad is also engaged in research efforts related to using clad products in concentrating solar power production facilities.

Operations

During the three years ended December 31, 2023, 2022 and 2021, the NobelClad segment represented approximately 15%, 14% and 33% of our consolidated net sales, respectively. Our manufacturing facilities and their respective shooting sites in Pennsylvania and Germany provide the production capacity to address projects for NobelClad’s global customer base.

NobelClad uses proprietary processes and technology to produce high quality clad metal products and limit re-work costs. The entire explosion-welding process involves significant precision in all stages, and any errors can be extremely costly as they often result in the discarding of the expensive raw material metals. NobelClad’s technological expertise helps ensure precision, minimize errors, and prevent costly waste.

NobelClad’s metal products are primarily produced for custom projects and conform to requirements set forth in customers’ purchase orders. Upon receipt of an order, NobelClad obtains the component materials from a variety of sources based on quality, availability and cost, and then produces the order in one of its manufacturing facilities. Final products are processed to meet contract specific requirements for product configuration and quality/inspection level.
 
Products

NobelClad manufacturing technology is used in a variety of product applications.

DetaClad™: Our explosion clad plates and cylinders, available in 260 compatible and non-compatible metal combinations, are the basis of the world’s pressure vessels, towers and crystallizers used in many industries.

Tube Sheets: Our clad tube sheets are made from corrosion-resistant alloys, making them ideal for applications ranging from refrigeration chillers on fishing boats to air conditioners for use in food and pharmaceutical manufacturing.

Vessel Heads & Cylinders: NobelClad delivers high-quality clad heads of all sizes for reactors, heat exchangers and process vessels. We adapt our head forming process to specific clad metal combinations.

Structural Transition Joints: NobelClad’s structural transition joints permanently join metals without mechanical fasteners. Shipbuilders turn to us to connect superstructures and bulkheads to steel hulls, framing and deck components.

Electrical Transition Joints: NobelClad’s electrical transition joints offer strong, low electrical resistance solutions for aluminum and zinc smelting, when anode clad and cathode applications must operate at elevated temperatures.

Cylindra™ Cryogenic Transition Joints: Compared with bolted connection systems, Cylindra offers an easier, more reliable way to connect stainless steel to aluminum pipes for producing LNG and industrial gases in Air Separation Units (ASU).

DetaPipe™ Spools, Elbows and Branches: NobelClad develops reactive metal pipe spools and elbows for piping systems in demanding high-pressure and high-temperature processes. This new technology allows for end users to benefit from the corrosion resistance performance and process safety that metals like zirconium, titanium and tantalum provide.

10

Table of Contents
Suppliers and Raw Materials

NobelClad's operations involve a range of alloys, steels and other materials, such as stainless steel, copper alloys, nickel alloys, titanium, zirconium, tantalum, aluminum and other metals. NobelClad sources its raw materials from a number of different producers and suppliers. It holds a limited metal inventory and purchases its raw materials based on contract specifications. Under most contracts, any raw material price increases are passed on to NobelClad’s customers. NobelClad closely monitors the quality of its supplies and inspects the type, dimensions, markings, and certification of all incoming metals to ensure that the materials will satisfy applicable construction codes. NobelClad also manufactures a majority of its own explosives from standard raw materials, and we believe that this allows us to achieve higher quality and lower cost.
 
Competition
 
Hot Roll Bonding and Weld Overlay.  NobelClad faces competition from two primary alternative cladding technologies: hot roll bonding and weld overlay. The technologies do not always compete directly, as each has applications that are better suited, relating to metal used and thicknesses required. However, specific project considerations such as technical specifications, price and delivery time allow these technologies to compete directly with explosion-welding. In the roll bond process, the clad metal and base metal are bonded during the hot rolling operation in which the metal slab is converted to plate. The weld overlay process is used by the many vessel fabricators that are often also NobelClad customers. In weld overlay cladding, the clad metal layer is deposited on the base metal using arc-welding type processes.

Explosion-Welded Metal Cladding. Worldwide competition in the explosion-welded clad metal business is fragmented, and we believe that NobelClad holds a strong market position in the industry. Within North America, NobelClad is one of the largest producers of explosion-welded clad products. In Europe, its manufacturing capacity gives NobelClad a strong position against competitors. In Asia, NobelClad has mixed competition ranging from competitors with strong brand names and competitive technology to other producers that are technically limited and offer minimal exports outside of their domestic markets. To remain competitive, NobelClad intends to continue developing and providing technologically advanced manufacturing services, maintaining quality levels, offering flexible delivery schedules, delivering finished products on a reliable basis and competing favorably on the basis of price.
 
Customer Profile
 
NobelClad’s customers can be divided into three tiers: the product end users (e.g., operators of chemical processing plants, and aluminum smelting plants), the engineering contractors that design and construct plants for end users, and the metal fabricators that manufacture the products or equipment that utilize NobelClad’s metal products. It is typically the fabricator that places the purchase order with NobelClad and pays the corresponding invoice. NobelClad has developed strong relationships over the years with the engineering contractors, process licensors, and equipment operating companies that frequently act as buying agents for fabricators.
 
Marketing, Sales, Distribution
 
NobelClad conducts its selling efforts by marketing its services to potential customers' senior management, direct sales personnel, program managers, and independent sales representatives. Prospective customers in specific industries are identified through networking in the industry, cooperative relationships with suppliers, public relations, customer references, inquiries from technical articles and seminars, website inquiries, webinars, and trade shows. NobelClad’s sales office in the United States covers both North and South America. Its sales offices in Europe cover the full European continent, Africa, the Middle East, and India. NobelClad also has a sales office in South Korea and China to address the Asian markets and uses contract agents to cover various other countries. Contract agents typically work under multi-year agreements which are subject to sales performance targets as well as compliance with NobelClad quality, customer service and compliance expectations. By maintaining relationships with its existing customers, developing new relationships with prospective customers, and educating all its customers as to the technical benefits of NobelClad’s products, NobelClad endeavors to assist in setting standard specifications, both by our customers and the American Society of Mechanical Engineers and ASTM International, to ensure that the highest quality and reliability are achieved.
 
NobelClad’s products are generally shipped from its manufacturing locations in the United States and Germany. Any shipping costs or duties for which NobelClad is responsible typically will be included in the price paid by the customer. Regardless of where the sale is booked, NobelClad will produce it, capacity permitting, at the location closest to the delivery place. In the event that there is a capacity issue at one facility, NobelClad can produce the order at its other production site, prioritizing timing. The two production sites allow NobelClad to meet customer production needs in a timely manner.

11

Table of Contents
Research and Development
 
We prepare a formal research and development plan annually. It is implemented at our cladding sites and is supervised by a technical committee that reviews progress quarterly and meets once a year to establish the plan for the following twelve months. The research and development projects concern process support, new products, new applications, and special customer-paid projects.

Corporate History and Recent Developments
 
The Company originated as an unincorporated business called “Explosive Fabricators,” which was formed in Colorado in 1965. The business was incorporated in Colorado in 1971 under the name “E. F. Industries, Inc.,” which was later changed to “Explosive Fabricators, Inc.” The Company became publicly traded in 1976. In 1994, the Company changed its name to “Dynamic Materials Corporation.” The Company reincorporated in Delaware in 1997.
 
In 2001, the Company acquired substantially all of the stock of NobelClad Europe SA, a French company (“NobelClad Europe”), which expanded the Company’s explosive metalworking operations to Europe.
 
In 2007, the Company acquired the German company DynaEnergetics GmbH and Co. KG (“DynaEnergetics”) and certain affiliates, which expanded the Company’s explosive metalworking operations in Europe and added a complementary energy products business.

In 2013, the Company branded its explosive metalworking operations under the single name NobelClad, and in 2014, the Company re-branded the energy products segment as DynaEnergetics.

In 2016, the Company changed its name to DMC Global Inc.

In 2021, the Company completed the acquisition of 60% of the membership interests in Arcadia Products. This acquisition diversified the markets and industries in which we operate and dramatically expanded our addressable markets.

On January 29, 2024, the Company announced that the Board initiated a review of strategic alternatives for the DynaEnergetics and NobelClad businesses to maximize value for shareholders and other stakeholders. The Board is overseeing the assessment process, including options for a sale, a merger or other business combination involving one or both businesses. The Board has not set a timetable to complete the strategic review process, and there can be no assurance that the review process will result in any transactions.

Human Capital
 
DMC empowers its people and organizations by institutionalizing entrepreneurship and celebrating ingenuity. We stand behind our businesses in ways that truly add value. Our culture is based on four core values: Integrity, Courage, Teamwork, and Humility.

These values represent and establish the foundation of how we conduct our business. By embedding our core values into our operating strategies, we ensure that our company culture also drives our Environmental, Social and Governance ("ESG") sustainability efforts.

DMC seeks to provide all employees with a supportive work environment and the opportunity to improve their skills and advance their careers. We believe every employee deserves an environment in which they are treated with dignity and respect, and their voices are heard. We support diversity within our workforce, and respect and embrace the different backgrounds, experiences, cultures and perspectives our employees bring to DMC.

As of December 31, 2023, we had approximately 1,800 permanent and part-time employees, of which approximately 1,500 employees are located inside the U.S., the majority of whom are engaged in manufacturing operations, with the
12

Table of Contents
remainder primarily in sales, marketing and administrative functions. None of our manufacturing employees are unionized. In addition, we use a number of temporary workers at any given time, depending on workload at our businesses.

Compensation and Benefits. Our compensation and benefits teams strive to develop and implement policies and programs that are fair to employees, support our business goals, maintain competitiveness, and promote shared fiscal responsibility among the Company and our employees. We offer employees benefits that vary by country and are designed to meet or exceed the requirements of local laws and to be competitive in the marketplace. Examples of benefits offered in the U.S. include traditional and Roth 401(k) plans with matching employer contributions; health benefits; life and disability insurance; additional voluntary insurance; paid counseling assistance; paid time off and parental leave; and a tuition reimbursement program. We have integrated these U.S. benefits programs for DMC and Arcadia. We also sponsor an employee stock purchase plan to encourage employees to acquire an ownership stake in DMC.

Health and Safety. The health and safety of our employees is fundamental to our success. The Board and management teams actively focus on the health and safety of our employees and engage various processes and programs to identify and manage risks through recognition, evaluation, and education. We empower our employees by fostering a sense of responsibility for managing their own work environment through open communication and training. Our occupational health and safety ("OH&S") management system is designed to foster a robust safety culture, stringent risk management and effective leadership.

Diversity and Inclusion. We believe that we will be most successful with a diverse employee population and encourage hiring and promotion practices that focus on the best talent and the most effective performers. Because we operate a global business across multiple business segments, products and service areas, we believe it is especially important that we attract employees with diverse backgrounds and the capability to address customer needs across the numerous cultures in the countries in which we operate. Our commitment to diversity and inclusion starts at the top with a highly skilled and diverse Board of Directors. We adopted a formal diversity and inclusion policy in May 2021.

Employee Development. DMC strives to identify top talent within the Company, and to provide opportunities for employees to progress to higher levels within the organization. We seek to maximize each employee’s developmental potential through a combination of training and experience.

Ethics. Our directors and all employees, including senior management, are required to conduct themselves in accordance with the highest professional and ethical standards, informed by a robust Code of Ethics and Business Conduct (the “Code”). We are committed to ensuring a fair and inclusive work environment in which employees are treated with dignity and respect. We have strict policies to protect against unlawful discrimination and harassment, and a Compliance Hotline that provides an alternative and anonymous method of reporting suspected violations of the Code, DMC’s corporate policies or applicable laws.
 
Government Regulations
 
DMC is subject to numerous environmental, legal and other governmental and regulatory requirements related to its operations worldwide. For additional details, see “Item 1(a). Risk Factors—Legal and Regulatory Risks”, which is incorporated by reference in this Item 1.

Insurance
 
Our operations expose us to potential liabilities for property damage and personal injury or death as a result of the failure of a component that has been designed, manufactured, serviced, processed, or distributed by us. We maintain liability insurance that we believe adequately protects us from potential product losses and liability claims.

Intellectual Property
 
We hold a variety of intellectual property through our businesses including but not limited to patents, patent applications, registered and unregistered trademarks, trade secrets, proprietary information and know-how. We have followed a policy of seeking patent and trademark protection in countries and regions throughout the world for products and methods that appear to have commercial significance.

No single patent or trademark is considered to be critical to any of Arcadia Products', DynaEnergetics', or NobelClad's operations.
13

Table of Contents
We are careful in protecting our proprietary know-how and manufacturing expertise in Arcadia Products, DynaEnergetics, and NobelClad, and each business unit has implemented measures and procedures designed to ensure that the information remains confidential.

Foreign and Domestic Operations and Export Sales
 
All sales are shipped from our manufacturing facilities and distribution centers located in the United States, Germany, and Canada. The following table presents our net sales based on the geographic location to where we shipped the product, regardless of the country of the actual end user.

Given the purchase of Arcadia Products in late 2021, it is only included in the table for the years ended December 31, 2023 and 2022.
(Dollars in Thousands)
For the years ended December 31,
 202320222021
United States$597,324 $549,370 $173,336 
Canada30,992 26,766 16,929 
United Arab Emirates9,227 5,107 3,843 
Oman7,949 3,188 3,115 
China6,438 3,902 10,365 
Iraq6,034 3,574 72 
Germany5,713 5,151 3,270 
Kuwait4,980 1,801 1,559 
South Korea4,562 3,242 2,144 
Saudi Arabia4,252 2,416 553 
France3,035 2,101 2,522 
Indonesia2,622 2,085 1,131 
India2,486 8,249 3,062 
Egypt2,340 5,780 3,519 
Ukraine2,332 — 3,742 
Netherlands2,146 3,041 2,200 
Italy2,110 1,816 1,467 
Sweden2,014 3,746 1,208 
Belgium2,009 603 2,547 
Australia1,866 1,816 1,567 
Norway1,292 1,854 2,211 
Turkey1,258 4,602 3,153 
South Africa1,154 1,970 886 
Russia*— 183 4,057 
Rest of the world15,053 11,723 11,657 
Net sales$719,188 $654,086 $260,115 

*Sales to Russia have been suspended indefinitely due to the ongoing conflict in Ukraine.

Company Information
 
We are subject to the informational requirements of the Securities Exchange Act of 1934, as amended (the "Exchange Act"). We therefore file periodic reports, proxy statements and other information with the Securities Exchange Commission (the “SEC”). The SEC maintains an Internet site at www.sec.gov that contains reports, proxy and information statements and other information regarding issuers that file electronically.
 
14

Table of Contents
Our Internet address is www.dmcglobal.com. Information contained on our website does not constitute part of this Annual Report on Form 10-K. Our annual report on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, and all amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Exchange Act are available free of charge on our website as soon as reasonably practicable after such material is electronically filed with, or furnished to, the SEC. We also regularly post information about our Company on our website under the "Investors" tab.

ITEM 1A. Risk Factors

Please carefully consider the following discussion of material factors, events, and uncertainties that make our business and an investment in our securities subject to risk. The events and consequences discussed in these risk factors could, in circumstances we may or may not be able to accurately predict, recognize, or control, have a material adverse effect on our business, growth, reputation, prospects, financial condition, operating results (including components of our financial results), cash flows, liquidity, and stock price. These risk factors do not identify all risks that we face; our operations could also be affected by factors, events, or uncertainties that are not presently known to us or that we currently do not consider to present significant risks to our operations.

Summary of Material Risk Factors

The following is a summary of the material risk factors that could adversely affect our business, financial condition, and results of operations. This summary should be read together with the more detailed descriptions of risks relating to our Company below.

Risk Factors Related to Arcadia Products

North American and global economic and industry-related business conditions materially affect our sales and results of operations.
We may not be able to continue to compete successfully against other companies in our industry.
If we are unable to manage our supply chain effectively, including availability and price of materials used in our products, our results of operations will be negatively affected.
An inability to successfully develop new products or improve existing products could negatively impact our ability to attract new customers and/or retain existing customers.
Product quality issues and product liability claims could adversely affect our operating results.
We recently implemented a new enterprise resource planning (ERP) system, and challenges with the implementation of the system may adversely impact our business and operations.

Risk Factors Related to DynaEnergetics

Demand for DynaEnergetics’ products is substantially dependent on the levels of capital expenditures by the oil and gas industry. Decreases or expected decreases in oil and gas prices and reduced expenditures in the oil and gas industry could have a material adverse impact on our financial condition, results of operations and cash flows.
Failure to adjust our manufacturing and supply chain to accurately meet customer demands could have a material adverse effect on our results of operations.
Failure to manage periods of growth or contraction may seriously harm our business.
We may not be able to continue to compete successfully against other companies in our industry.
Recent conflict in the Middle East may adversely affect our business and results of operations.
If we are not able to design, develop, and produce commercially competitive products in a timely manner in response to changes in the market, customer requirements, competitive pressures, and technology trends, our business and consolidated results of operations and the value of our intellectual property could be materially and adversely affected.
We may be unable to successfully execute and realize the expected financial benefits from strategic initiatives.
Demand for DynaEnergetics products could be reduced by existing and future legislation, regulations and public sentiment.
Consolidation of our customers and competitors may impact our results of operations.
Risk Factors Related to NobelClad

NobelClad’s business is dependent on sales to a limited number of customers in cyclical markets and our results are affected by the price of metals.
We are dependent on a relatively small number of large projects and customers for a significant portion of our net sales.
15

Table of Contents
Our backlog figures may not accurately predict future sales.
There is a limited availability of sites suitable for cladding operations.
There is no assurance that we will continue to compete successfully against other manufacturers of competitive products.
Customers have the right to change orders until products are completed.
Our costs could substantially increase if we experience a large claim or a significant number of warranty claims.

Risk Factors Related to our Businesses Generally

Our efforts to grow and transform our businesses may require significant investments; if our strategies are unsuccessful, our business, results of operations and/or financial condition may be materially adversely affected.
Our review of potential strategic alternatives may not result in executed or consummated transactions or other strategic alternatives, and the process of reviewing strategic alternatives or its conclusion could adversely affect our business and our stockholders.
Our operations are subject to political and economic instability and risk of government actions that could have a material adverse effect on our business, consolidated results of operations, and consolidated financial condition.
Inflation and higher interest rates have, and may continue to, adversely affect our financial position and results of operations.
Our business, financial condition and results of operations could be adversely affected by disruptions in the global and European economies caused by the ongoing military action between Russia and Ukraine.
Our operating results fluctuate from quarter to quarter.
We are exposed to potentially volatile fluctuations of the U.S. dollar (our reporting currency) against the currencies of many of our operating subsidiaries.
Disruptions or delays involving our suppliers or increases in prices for the components, raw materials and parts that we obtain from our suppliers could have a material adverse effect on our business and consolidated results of operations.
The terms of our indebtedness contain a number of restrictive covenants, the breach of any of which could result in acceleration of payment of our credit facilities.
If our customers delay paying or fail to pay a significant amount of our outstanding receivables, it could have a material adverse effect on our liquidity, consolidated results of operations, and consolidated financial condition.
New or existing tariffs and other trade measures could adversely affect our results of operations, financial position and cash flows.
Failure to attract and retain key personnel and source sufficient labor could adversely affect our current operating results.
A failure in our information technology systems or those of third parties, including those caused by security breaches, cyber-attacks or data protection failures, could disrupt our business, result in significant legal costs and other losses and damage our reputation.
Failure to establish and maintain adequate internal controls over financial reporting could result in the inability to report our financial results in a timely and reliable manner, which could harm our business and impact the value of our securities.

Legal and Regulatory Risks

Our operations require us to comply with numerous laws and regulations, violations of which could have a material adverse effect on our consolidated results of operations, financial condition or cash flows.
The use of explosives in our DynaEnergetics and NobelClad manufacturing processes and products subject us to additional environmental, health and safety laws and any accidents or injuries could subject us to significant liabilities.
Demand for our products could be reduced by existing and future legislation, regulations and public sentiment.
We are subject to extensive environmental, health and safety laws and failure to comply with such laws and regulations could result in restrictions or prohibitions on our facilities, substantial civil or criminal liabilities and could have a material adverse effect on our business, consolidated results of operations, and consolidated financial condition.
Failure to comply with applicable federal, state and local employment and labor laws and regulations could have a material, adverse impact on our business.
The regulatory environment governing information, data security and privacy is increasingly demanding and evolving and a data security breach could result in litigation, enforcement actions and related penalties and fines.
Legal, regulatory or market measures to address climate change, including proposals to restrict emissions of GHGs and other sustainability initiatives, could have an adverse impact on the Company’s business and results of operations.
Changes in or interpretation of tax law could impact the determination of our income tax liabilities for a tax year.

16

Table of Contents
Intellectual Property Risks

Our failure to protect our proprietary information and any successful intellectual property challenges against us could materially and adversely affect our competitive position.
We may incur substantial costs defending against third parties alleging that we infringe their proprietary rights.

Risks Related to Acquisitions

We have incurred debt to finance the acquisition of 60% of Arcadia Products and may incur additional substantial financial obligations in connection with the acquisition of the remaining 40% of Arcadia Products.
DMC is the majority shareholder of Arcadia Products, and our interest in Arcadia Products is subject to the risks normally associated with the conduct of businesses with a minority shareholder.
To the extent that we seek to further expand our business through acquisitions, we may experience issues in executing acquisitions or integrating acquired operations.

Risk Factors Related to Our Common Stock

The price and trading volume of our common stock may be volatile, which may make it difficult for you to resell the common stock when you want or at prices you find attractive.

Risk Factors Related to Arcadia Products

North American and global economic and industry-related business conditions materially affect our sales and results of operations.

Our Arcadia Products business is significantly influenced by North American economic conditions and the cyclical nature of the North American commercial and residential construction industry. The construction industry is impacted by macroeconomic trends, such as availability of credit, employment levels, consumer confidence, interest rates and commodity prices. Recent rising inflation, interest rates, and construction costs have reduced, and could continue to reduce, the demand for our products and impact our profitability. Higher interest rates make it more expensive to finance construction projects, and as a result, may reduce the demand for our products. In addition, changes in architectural design trends, demographic trends, and/or remote work trends could negatively impact demand for our products. To the extent changes in these factors negatively impact the overall commercial construction industry, our revenue and profits could be significantly reduced.

We may not be able to continue to compete successfully against other companies in our industry.

The markets in which Arcadia Products operates are highly competitive and many of our competitors are larger and better capitalized than we are. These competitors may be better able to withstand changes in conditions within the industries and markets in which we operate and may have significantly greater operating and financial flexibility than we have. Moreover, barriers to entry are low in certain product lines and new competitors may enter our industry, whether within the U.S. or internationally. An increase in competition, including in the form of aggressive pricing by new market entrants or offerings of alternative building materials, could cause us to lose customers and lead to decreases in net sales and profitability if we are not able to respond adequately to such challenges. The actions of our existing competitors or new competitors could result in loss of customers and/or market share. Changes in our competitors' products, prices or services could negatively impact our market share, net sales and/or margins.

If we are unable to manage our supply chain effectively, including availability and price of materials used in our products, our results of operations will be negatively affected.

We obtain a significant portion of our key raw materials, such as aluminum extrusions, from a few key suppliers. While we structure many of our supply arrangements to moderate the effects of fluctuations in the market for raw aluminum and we endeavor to adjust our customer pricing to offset potential impacts, operating results could be negatively impacted by price movements in the market for raw aluminum. In recent years, we have seen increased volatility in the price of aluminum that we purchase from our key suppliers.

17

Table of Contents
Our suppliers are subject to fluctuations in general economic cycles. Global economic conditions and political and economic instability may impact their ability to operate their businesses, including the ongoing military action between Russia and Ukraine and related government actions. Some of our suppliers have been and may continue to be negatively impacted by the costs or availability of raw materials, labor and transportation, and they may not be able to handle commodity cost volatility or changing volumes while still performing up to our specifications. These factors may cause suppliers to be unable to meet their commitments or to negatively change the terms of supply arrangements.

The loss of, or substantial decrease in the availability of, products from our suppliers, or the loss of a key supplier, could adversely impact our financial condition and results of operations. If any of our key suppliers are unable to meet their commitments, or if those supply arrangements are terminated, we may not be able to obtain certain raw materials on commercially reasonable terms or at all, and may suffer a significant interruption in our ability to manufacture our products, including because it may be difficult to find substitute or alternate suppliers as the aluminum extrusions we use are customized.

We could also be required to maintain higher inventory levels as we address supply uncertainties. Such developments would result in higher costs and potentially a decrease in our revenues and profitability. If our supply of raw materials is disrupted or our delivery times are extended, our results of operations and financial condition could be materially adversely affected.

An inability to successfully develop new products or improve existing products could negatively impact our ability to attract new customers and/or retain existing customers.

Our success depends on meeting consumer needs and anticipating changes in consumer preferences with successful new products and product improvements. We aim to introduce products and new product designs proactively to offset obsolescence and decreases in sales of existing products. While we devote significant focus to the development of new products, we may not be successful in product development and our new products may not be commercially successful. In addition, it is possible that competitors may improve their products more rapidly or effectively, which could adversely affect our sales. Furthermore, market demand may decline as a result of consumer preferences trending away from our categories or trending down within our brands or product categories, which could adversely impact our results of operations, cash flows and financial condition.

Product quality issues and product liability claims could adversely affect our operating results.

We believe that future orders of our products will depend on our ability to maintain the performance, reliability, quality and timely delivery standards required by our customers. We have in the past been and currently are subject to product liability and warranty claims. If our products have performance, reliability or quality problems, or products are installed improperly, we may experience additional warranty expense; reduced or canceled orders; or delays in the collection of accounts receivable. Additionally, product liability and warranty claims could result in costly and time-consuming litigation that could require significant time and attention of management and involve significant monetary damages that could negatively impact our operating results. There is no assurance that the number and value of product liability and warranty claims will not increase as compared to historical claim rates, or that our warranty reserve at any particular time will be sufficient. No assurance can be given that coverage under insurance policies, if applicable, will be adequate to cover future product liability claims against us. If we are unable to recover on insurance claims, in whole or in part, or if we exhaust our available insurance coverage at some point in the future, then we might be forced to expend legal fees and settlement or judgment costs relating to product liability and warranty claims, which could negatively impact our profitability, results of operations, cash flows and financial condition.

We recently implemented a new enterprise resource planning (ERP) system, and challenges with the implementation of the system may adversely impact our business and operations.

Phase one of a new ERP system went live in July 2023. While the ERP changeover led to a brief operational slowdown early in the third quarter, the system is expected to enhance operating efficiencies and the internal control environment throughout Arcadia by streamlining data sources, simplifying complex processes, and reducing manual processes. Any disruptions, deficiencies, or other problems associated with the implementation of our ERP system, such as quality issues, programming errors, or inconsistent employee adoption could adversely affect our ability to operate our business, produce timely and accurate financial statements, or comply with applicable regulations. This could result in negative impacts on our business and operations. Additionally, the implementation involves greater utilization of third-party cloud computing services in connection with our Arcadia operations. Problems faced by us or our third-party providers relating to this implementation, including technological or business-related disruptions and cybersecurity threats, could adversely impact our business, results of operations, and financial condition for future periods. Any failures identified within our internal controls as a result of this
18

Table of Contents
implementation, even if quickly remediated, or difficulties encountered during implementation, may adversely impact our operating results or hinder our ability to report our financial results in a timely and accurate basis.

Risk Factors Related to DynaEnergetics

Demand for DynaEnergetics’ products is substantially dependent on the levels of capital expenditures by the oil and gas industry. Decreases or expected decreases in oil and gas prices and reduced expenditures in the oil and gas industry could have a material adverse impact on our financial condition, results of operations and cash flows.

Demand for the majority of DynaEnergetics' products depends substantially on the level of expenditures by the oil and gas industry for the exploration, development and production of oil and natural gas reserves. These expenditures are generally dependent on the industry’s view of future oil and natural gas prices and are sensitive to the industry’s view of future economic growth and the resulting impact on demand for oil and natural gas. Higher oil and gas prices have resulted in increasing North American completion activity and increased expenditures by the oil and gas industry. This has resulted in increased cash flows for E&P companies; however, E&P companies are still seeking to control their cost of operations and this has continued to contribute to downward pressure on prices for our products. In addition, the oil and gas industry has historically been cyclical, and to date in 2024, oil prices have declined significantly from their 2022 highs. When oil prices decline, we would expect an increased risk of reduced or delayed oil and gas exploration and production spending, project modifications, delays or cancellations, general business disruptions, and delays in payment of, or nonpayment of, amounts that are owed to us, all of which could result in reduced demand for our products, downward pressure on selling prices for our products and decreased revenues and profits. These effects would likely have a material adverse effect on our financial condition, results of operations and cash flows.

The prices for oil and natural gas have historically been volatile and can be affected by a variety of factors, including:

changes in the supply of and demand for hydrocarbons, which are affected by general economic, business and regulatory conditions;
the ability or willingness of the Organization of Petroleum Exporting Countries (“OPEC”) and other oil producing companies to set and maintain production levels for oil;
oil and gas production levels in the U.S. and in other non-OPEC countries;
the level of excess production capacity;
speculation as to the future price of oil and the speculative trading of oil and natural gas futures contracts;
government initiatives to restrict oil and gas drilling or development or promote the use of renewable energy sources and public sentiment regarding the same;
political and economic uncertainty, geopolitical unrest, and acts of war;
the level of worldwide oil and gas exploration and production activity;
access to potential resources;
changes in governmental policies, subsidies, or sanctions;
the costs of exploring for, producing and delivering oil and gas;
technological advances affecting energy consumption; and
weather conditions.

Continued or worsening conditions in the oil and gas industry generally may have a further material adverse effect on our business, financial condition, results of operations, cash flows and prospects.

Failure to adjust our manufacturing and supply chain to accurately meet customer demands could have a material adverse effect on our results of operations.

We make significant decisions, including determining the levels of business that we will seek and accept, production schedules, levels of reliance on contract manufacturing and outsourcing, internal fabrication utilization and other resource requirements, based on our estimates of customer requirements. Factors that can impact our ability to accurately estimate future customer requirements include the short-term nature of many customers’ commitments, our customers’ ability to reschedule, cancel and modify orders with little or no notice and without significant penalty, the accuracy of our customers’ forecasts, and seasonal or cyclical trends in customers' industries.

To ensure availability of our products, particularly for our largest customers, we may start manufacturing our relevant products based on our customers’ forecasts, which are not binding. As a result, we incur inventory and manufacturing costs in advance of anticipated sales that may never materialize or which may be substantially lower than expected. If actual demand for our products is lower than forecast, we may also experience higher inventory carrying and operating costs and product
19

Table of Contents
obsolescence. Because certain of our sales, research and development, and internal manufacturing overhead expenses are relatively fixed, a reduction in customer demand may also decrease our gross margin and operating income.

Conversely, customers often require rapid increases in production on short notice. We may be unable to secure sufficient materials or contract manufacturing capacity to meet such increases in demand. This could damage our customer relationships, reduce revenue growth and margins, subject us to additional liabilities, harm our reputation, and prevent us from taking advantage of opportunities.

Failure to manage periods of growth or contraction may seriously harm our business.

Our industry frequently sees periods of expansion and contraction which require companies to adjust to customers’ needs and market demands. We regularly contend with these issues and must carefully manage our business to meet customer and market requirements. If we fail to manage these growth and contraction decisions effectively, we may find ourselves with either excess or insufficient resources and our business and our profitability could suffer as a result.

Periods of contraction or reduced net sales, or other factors negatively affecting particular markets, require us to assess whether facilities remain viable, whether staffing levels need to be reduced, and how to respond to changing levels of customer demand. While maintaining excess capacity or higher levels of employment entails short-term costs, reductions in capacity or employment could impair our ability to respond to new opportunities and programs, market improvements or to maintain customer relationships. Our decisions to reduce costs and capacity can affect our short-term and long-term results and result in restructuring charges.

Expansions, including the transfer of operations to other facilities, include the risk of additional costs and start-up inefficiencies. If we are unable to effectively manage our expansion projects or related anticipated net sales are not realized, our operating results could be materially adversely affected.

We may not be able to continue to compete successfully against other companies in our industry.

The markets in which we operate are highly competitive. DynaEnergetics competes with a broad spectrum of companies that produce and market perforating services and products. Many of these companies are large national and multi-national companies, including the oil and natural gas industry’s largest oilfield service providers. These companies have longer operating histories, greater financial, technical, and other resources, and greater name recognition than we do. In addition, we compete with many smaller companies capable of competing effectively on a regional or local basis. Our competitors may be able to respond more quickly to new or emerging technologies and changes in customer requirements. To remain competitive, DynaEnergetics must continue to provide innovative products at competitive prices and maintain an excellent reputation for value, quality, on-time delivery, and safety. If we fail to compete successfully against our competition, we may be unable to maintain acceptable sales levels, prices and margins for our products, which could have a material adverse effect on our business, financial condition, and results of operations

Recent conflict in the Middle East may adversely affect our business and results of operations.

Recent conflict in the Middle East has resulted in volatility in oil prices due to concerns regarding the conflict’s impact on global oil supplies. Continued conflict or an expanded or increased level of conflict could further impact oil prices and drilling activity globally or have adverse effects on global macroeconomic conditions generally, which could have a negative impact on our business and results of operations.

If we are not able to design, develop, and produce commercially competitive products in a timely manner in response to changes in the market, customer requirements, competitive pressures, and technology trends, our business and consolidated results of operations and the value of our intellectual property could be materially and adversely affected.

The market for our products is characterized by continual technological developments to provide better and more reliable performance and enhanced product offerings. If we are not able to design, develop, and produce commercially competitive products in a timely manner in response to changes in the market, customer requirements, competitive pressures, and technology trends, our business and consolidated results of operations and the value of our intellectual property could be materially and adversely affected. Likewise, if our proprietary technologies, equipment, facilities, or work processes become obsolete, we may no longer be competitive, and our business and consolidated results of operations could be materially and adversely affected.

We may be unable to successfully execute and realize the expected financial benefits from strategic initiatives.
20

Table of Contents

From time to time, our business has engaged in strategic initiatives, and such activities may occur in the future. These efforts have recently included a series of automation, lean manufacturing and cost-reduction initiatives designed to enhance profitability and improve quality. While we expect meaningful financial benefits from our strategic initiatives, we may not realize the full benefits expected within the anticipated timeframe. Adverse effects from strategy-driven organizational changes could interfere with our realization of anticipated synergies, customer service improvements and cost savings from these strategic initiatives. Additionally, our ability to fully realize the benefits and implement strategic initiatives may be limited by certain contractual commitments. Moreover, we may incur substantial expenses in connection with the execution of strategic plans in excess of what is forecasted. Further, strategic initiatives can be a complex and time-consuming process that can place substantial demands on management, which could divert attention from other business priorities or disrupt our daily operations. Any of these failures could materially adversely affect our business, financial condition, results of operations and cash flows, which could constrain our liquidity.

Demand for DynaEnergetics products could be reduced by existing and future legislation, regulations and public sentiment.

Regulatory agencies and environmental advocacy groups in the United States, the E.U., and other regions or countries have been focusing considerable attention on emissions of carbon dioxide, methane and other greenhouse gases and their role in climate change. There is also increased focus, including by governments and our customers, investors and other stakeholders, on these and other sustainability and energy transition matters. Existing or future legislation and regulations related to greenhouse gas emissions and climate change, as well as initiatives by governments, non-governmental organizations, and companies to conserve energy or promote the use of alternative energy sources, and negative attitudes toward or perceptions of fossil fuel products and their relationship to the environment, may significantly curtail demand for and production of oil and gas in areas of the world where our customers operate, and thus reduce future demand for DynaEnergetics products.

In addition, some international, national, state and local governments and agencies have also adopted laws and regulations or are evaluating proposed legislation and regulations that are focused on directly limiting the extraction of shale gas or oil using hydraulic fracturing. These laws and regulations could limit oil and gas development, lead to operational delays and increased costs for our customers, and therefore reduce demand for DynaEnergetics' products. Such reductions in demand for our products may, in turn, adversely affect our financial condition, results of operations and cash flows.

Increased negative investor sentiment toward oil and gas and preference for assets outside of traditional energy sectors could lead to higher capital costs for our customers and reduced investment in fossil fuels, thereby reducing demand for our products. Such preferences could also impact our ability to obtain acceptable debt or equity financing on attractive terms or at all and could negatively impact our stock price over time. Our business, reputation and demand for our stock could be negatively affected if we do not (or are perceived to not) act responsibly with respect to sustainability matters.

Consolidation of our customers and competitors may impact our results of operations.

The oil and gas industry has historically experienced periods of consolidation which may result in reduced capital spending by some of our customers, the acquisition of one or more of our primary customers, or competitors and consolidated entities using size and purchasing power to seek pricing or other concessions, which may lead to decreased demand for our products. We are continuing to experience significant customer concentration and customer consolidation, resulting in certain customers having substantial pricing power, which has negatively impacted our margins and profitability. During the year ended December 31, 2023, one DynaEnergetics customer accounted for approximately 15% of consolidated net sales of the Company. In addition, recent, ongoing and future mergers, combinations and consolidations in our industry could result in existing competitors increasing their market share. As a result, industry consolidation may have a significant negative impact on our results of operations, financial position or cash flows.

Risk Factors Related to NobelClad

NobelClad’s business is dependent on sales to a limited number of customers in cyclical markets and our results are affected by the price of metals.

NobelClad revenues are affected both by the demand for NobelClad’s explosion-welded cladding services and the base price of metal used in explosion-welded cladding operations. The explosion-welded cladding market is dependent upon sales of products for use by customers in a limited number of heavy industries, including oil and gas, chemicals and petrochemicals, alternative energy, hydrometallurgy, aluminum production, shipbuilding, rail car manufacturing, power generation, and industrial refrigeration. These industries tend to be cyclical in nature and an economic slowdown in one or all of these
21

Table of Contents
industries-whether due to traditional cyclicality, general economic conditions or other factors-could impact capital expenditures within that industry. Inflationary conditions in many markets, have created uncertainty in our end markets, and we have seen continued delays in projects and capital expenditures. In addition, metals prices affect the demand for cladded products and our margins. Although higher metal prices increase demand for use of cladded materials over solid metals, lead to higher sales (in terms of dollars rather than square meters of cladding) and generally higher margins for NobelClad, metal pricing is volatile. We have recently experienced several years of a low-metals-price environment, which significantly reduced demand for clad product and overall sales. In the last two years, the price of metals has increased substantially. However, there can be no assurance that prices will remain at these levels and supply chain difficulties and other uncertainties have disrupted projects and normal sales cycles. If demand or metals prices decline or if supply chain issues or similar disruptions persist, our sales would be adversely affected, and this could have a material adverse effect on our business, financial condition, and results of operations.

We are dependent on a relatively small number of large projects and customers for a significant portion of our net sales.

A significant portion of our net sales is derived from a relatively small number of projects and customers; therefore, the failure to complete existing contracts on a timely basis, to receive payment for such services in a timely manner, or to enter into future contracts at projected volumes and profitability levels could adversely affect our ability to meet cash requirements exclusively through operating activities. We attempt to minimize the risk of losing customers or specific contracts by continually improving commercial execution and product quality, delivering product on time and competing aggressively on the basis of price. We expect to continue to depend upon our principal customers for a significant portion of our sales, although our principal customers may not continue to purchase products and services from us at current levels, if at all. The loss of one or more major customers or a change in their buying patterns could have a material adverse effect on our business, financial condition, and results of operations.

Our backlog figures may not accurately predict future sales.

We use backlog to predict our anticipated future sales. Our year-end backlog was $59.4 million, $55.5 million, and $41.2 million at the end of fiscal years 2023, 2022 and 2021, respectively. We define “backlog” at any given point in time to consist of all firm, unfulfilled purchase orders and commitments at that time. We expect to fill most items in backlog within the following twelve months. However, since orders may be rescheduled or canceled and a significant portion of our net sales is derived from a small number of customers, backlog is not necessarily indicative of future sales levels. Moreover, we cannot be sure of when during the future twelve-month period we will be able to recognize revenue corresponding to our backlog nor can we be certain that revenues corresponding to our backlog will not fall into periods beyond the twelve-month horizon.

There is a limited availability of sites suitable for cladding operations.

Our cladding process involves the detonation of large amounts of explosives. As a result, the sites where we perform cladding must meet certain criteria, including adequate distance from densely populated areas, specific geological characteristics, and the ability to comply with local noise and vibration abatement regulations in conducting the process. Our shooting sites in Pennsylvania and in Germany are located in mines. Our Pennsylvania shooting site is subleased under an arrangement pursuant to which we provide certain contractual services to the sub-landlord, and this sublease expires in 2029. Our shooting sites require ongoing maintenance and investment, and failure to adequately maintain these sites could result in reduced access or capacity constraints. In addition, we could experience difficulty in obtaining or renewing permits because of resistance from residents in the vicinity of existing or proposed sites. The failure to obtain required governmental approvals or permits could limit our ability to expand our cladding business in the future, and the failure to maintain such permits or satisfy other conditions to use the sites would have a material adverse effect on our business, financial condition and results of operations.

There is no assurance that we will continue to compete successfully against other manufacturers of competitive products.

Our explosion-welded clad products compete on a worldwide basis with explosion-welded clad products made by other manufacturers in the clad metal business and with products manufactured using other technologies. We see competition from large well-known clad suppliers and from a growing number of smaller companies with explosion welded clad manufacturing capability in China and India. Explosion-welded clad products also compete with products manufactured by roll bond and weld overlay cladding processes. The technical and commercial niches of each cladding process are well understood within the industry and vary from one market location to another and at different metal prices. We focus on reliability, product quality, on-time delivery performance, and low-cost manufacturing to minimize the potential of future competitive threats. However, there is no guarantee we will be able to maintain our competitive position.
22

Table of Contents

Customers have the right to change orders until products are completed.

Customers have some rights to change orders after they have been placed. If orders are changed, the extra expenses associated with the change usually will be passed on to the customer. However, because a change in an order may delay completion of the project, recognition of income for the project may also be delayed. Additionally, any errors or changes as to specifications or significant changes in pricing or availability of materials may cause cost overruns and delays in completion of projects. If we fail to meet delivery schedules, we may be required to pay damages or may risk loss of an order, which could have a material adverse effect on our business, financial condition and results of operations.

Our costs could substantially increase if we experience a large claim or a significant number of warranty claims.

Our product warranties against technical defects of our clad products vary depending on our purchase orders with customers. The warranties require us to repair or replace defective products and may require the payment of a certain percentage of the purchase price as liquidated damages for our failure to meet the specified product specifications and delivery requirements. In addition, our clad products are often used as part of larger projects or are used in potentially hazardous applications that can cause injury or loss of life and damage to property or equipment. In the event of an actual or alleged product defect, we may be named as a defendant in product liability or other lawsuits asserting potentially large claims. We cannot guarantee that insurance will be available or adequate to cover any or all liabilities incurred. We generally have not established any reserve funds for potential warranty claims since historically we have experienced few warranty claims for our products and the costs associated with our warranty claims have been low. If we experience an increase in warranty claims or if our repair and replacement costs associated with warranty claims increase significantly, it could have a material adverse effect on our financial condition and results of operations.

Risk Factors Related to our Businesses Generally

Our efforts to grow and transform our businesses may require significant investments; if our strategies are unsuccessful, our business, results of operations and/or financial condition may be materially adversely affected.

We continuously evaluate opportunities for growth and change. These initiatives may involve making acquisitions, entering into partnerships and joint ventures, divesting assets, restructuring our existing operations and assets, creating new financial structures and building new facilities—any of which could require a significant investment and subject us to new risks. We may incur additional indebtedness to finance these opportunities. If our strategies for growth and change are not successful, we could face increased financial pressure, such as increased cash flow demands, reduced liquidity and diminished access to financial markets, and the equity value of our businesses could be diluted.

The implementation of strategies for growth and change may create additional risks, including:

● diversion of management time and attention away from existing operations;

● requiring capital investment that could otherwise be used for the operation and growth of our existing businesses;

● disruptions to important business relationships;

● increased operating costs;

● limitations imposed by various governmental entities; and

● difficulties due to lack of or limited prior experience in any new markets we may enter.

Our inability to mitigate these risks or other problems encountered in connection with our strategies for growth and change could have a material adverse effect on our business, results of operations and financial condition. In addition, we may fail to fully achieve the savings or growth projected for current or future initiatives notwithstanding the expenditure of substantial resources in pursuit thereof.

23

Table of Contents
Our review of potential strategic alternatives may not result in executed or consummated transactions or other strategic alternatives, and the process of reviewing strategic alternatives or its conclusion could adversely affect our business and our stockholders.

In January 2024, we announced that we are reviewing potential strategic alternatives for DynaEnergetics and NobelClad aimed at maximizing value for our shareholders. The potential strategic alternatives include, among other things, a sale, a merger or other business combination of a portion of our business-unit assets, and/or a strategic investment. We are actively working with a financial advisor and may retain other advisors to assist the Board in evaluating our current strategy, operations, and capital structure.

Any potential transaction or other strategic alternative would be dependent on a number of factors that may be beyond our control, including, among other things, market conditions, industry trends, regulatory approvals, and the availability of financing for a potential transaction on reasonable terms. The process of reviewing potential strategic alternatives is time consuming and may be distracting and disruptive to our business operations and long-term planning, which may cause concern to our current or potential customers, employees, investors, strategic partners and other constituencies and may have a material impact on our business and operating results or result in increased volatility in our share price. We expect to incur substantial expenses associated with identifying, evaluating and negotiating potential strategic alternatives. There can be no assurance that any potential transaction or other strategic alternative, if consummated, will provide greater value to our stockholders than that reflected in the current price of our common stock. Until the review process is concluded, perceived uncertainties related to our future may result in the loss of potential business opportunities, volatility in the market price of our common stock and difficulty attracting and retaining qualified talent and business partners. Similarly, activist investors may engage in proxy solicitations or advance shareholder proposals, or otherwise attempt to affect changes and assert influence on our Board and management, which could lead to the impacts on our business, Board, management and employees discussed above.

Our operations are subject to political and economic instability and risk of government actions that could have a material adverse effect on our business, consolidated results of operations, and consolidated financial condition.

We are exposed to risks inherent in doing business in each of the countries in which we operate. Our operations are subject to various risks unique to each country that could have a material adverse effect on our business, consolidated results of operations, and consolidated financial condition. With respect to any particular country, these risks may include:
political, social and economic instability;
civil unrest, acts of terrorism, force majeure, war, other armed conflict;
public health crises and catastrophic events;
inflation;
currency fluctuations, devaluations, conversion, or repatriation restrictions;
expropriation and nationalization of our assets;
confiscatory taxation or other adverse tax policies;
theft of, or lack of sufficient legal protection for, proprietary technology and other intellectual property;
limitations on extraction of shale gas or oil using hydraulic fracturing;
limitations on or disruptions to our markets or operations, restrictions on payments, or limitations on the movement of funds;
increased tariffs;
trade and economic sanctions or other restrictions;
unexpected changes in legal and regulatory requirements, including changes in interpretation or enforcement of existing laws;
deprivation of contract rights; and
the inability to obtain or retain licenses required for operation.

Inflation and higher interest rates have, and may continue to, adversely affect our financial position and results of operations.

Increases in the cost of wages, materials, parts, equipment, transportation and other operational components over the past two years have adversely affected our results of operations, cash flows and financial position by increasing our overall cost structure, and could continue to do so, particularly if we are unable to achieve commensurate increases in the prices we charge our customers for our products. In addition, higher interest rates in the U.S. have increased the cost of debt borrowing, which decreases cash available for debt repayment, investment, and acquisitions.

24

Table of Contents
Our business, financial condition and results of operations could be adversely affected by disruptions in the global and European economies caused by the ongoing military action between Russia and Ukraine.

In February of 2022, Russian military forces invaded Ukraine, resulting in conflict and disruption in the region. The length, impact and outcome of the ongoing military conflict in Ukraine is highly unpredictable. This conflict has led and may continue to lead to significant market and other disruptions, including significant volatility in commodity prices and supply of energy resources, instability in financial markets, higher inflation, supply chain interruptions, increased costs for transportation and raw materials, political and social instability, as well as an increase in cyberattacks and espionage. Furthermore, governments in the United States, the European Union, the United Kingdom, Canada and others have imposed financial and economic sanctions on certain industry segments and various parties in Russia. We continue to monitor the conflict including the potential impact of financial and economic sanctions on the global economy and particularly the economies of Europe. Increased trade barriers, sanctions and other restrictions on global or regional trade could adversely affect our business, financial condition and results of operations. Further escalation of geopolitical tensions related to this military conflict and/or its expansion could result in loss of property, expropriation, cyberattacks, supply disruptions, plant closures and an inability to obtain key supplies and materials, as well as adversely affect both our and our customers' supply chains and logistics, particularly in Europe.

In many cases, both our German operations and those of European customers and suppliers depend on the availability of natural gas for use in their manufacturing operations. A significant proportion of Germany's natural gas supply has historically originated from Russia. Material disruptions of natural gas supply to Europe and in particular Germany, whether from sanctions, counter-measures by Russia, other restrictions, damage to infrastructure and logistics or otherwise from the destabilizing effects of military conflict could materially and adversely impact European and global natural gas and oil markets. We expect that shortages in supply and increases in costs of natural gas or other energy will adversely impact our ability to operate our German manufacturing facilities as efficiently and cost-effectively as previously, which could adversely affect our business, results of operations and financial condition.

Our operating results fluctuate from quarter to quarter.

We have experienced, and expect to continue to experience, fluctuations in annual and quarterly operating results caused by various factors at our businesses. At NobelClad, quarterly sales and operating results depend on the volume and timing of the orders in our backlog as well as bookings during the quarter. At DynaEnergetics, the level of demand from our customers is impacted by oil and gas prices as well as a variety of other factors and can vary significantly from quarter to quarter. At Arcadia Products, operating results can fluctuate due to price movements in the market for raw aluminum. Portions of our operating expenses are fixed, and planned expenditures are based primarily on sales forecasts and product development programs. If sales do not meet our expectations in any given period, the adverse impact on operating results may be magnified by our inability to adjust operating expenses sufficiently or quickly enough to compensate for such a shortfall. Results of operations in any period should not be considered indicative of the results for any future period.

We are exposed to potentially volatile fluctuations of the U.S. dollar (our reporting currency) against the currencies of many of our operating subsidiaries.

Many of our operating subsidiaries conduct business in euros, Canadian dollars, or other foreign currencies. Sales made in currencies other than U.S. dollars accounted for 9%, 6%, and 16% of total sales for the years ended 2023, 2022 and 2021, respectively. Any increase or decrease in the value of the U.S. dollar against any foreign currency that is the functional currency of any of our operating subsidiaries will cause us to experience foreign currency translation gains or losses with respect to amounts already invested in such foreign currencies. In addition, our company and our operating subsidiaries are exposed to foreign currency risk to the extent that we or they enter into transactions denominated in currencies other than our or their respective functional currencies. For example, DynaEnergetics Europe's functional currency is euros, but its sales often occur in U.S. dollars. Changes in exchange rates with respect to these items will result in unrealized (based upon period-end exchange rates) or realized foreign currency transaction gains and losses upon settlement of the transactions. In addition, we are exposed to foreign exchange rate fluctuations related to our operating subsidiaries’ assets and liabilities and to the financial results of foreign subsidiaries and affiliates when their respective financial statements are translated into U.S. dollars for inclusion in our Consolidated Financial Statements. Cumulative translation adjustments are recorded in other cumulative comprehensive loss as a separate component of equity. Our primary exposure to foreign currency risk is the euro, due to the percentage of our U.S. dollar revenue that is derived from countries where the euro is the functional currency. We use foreign currency forward contracts, generally with maturities of one month, to offset foreign exchange rate fluctuations on certain foreign currency denominated asset and liability account balances. These hedge transactions relate to our operating entities with significant economic exposure to transactions denominated in currencies other than their functional currency. Our primary economic
25

Table of Contents
exposures include the U.S. dollar to the euro, the U.S. dollar to the Canadian dollar, and the euro to the U.S. dollar. Since the underlying balance sheet account balances being hedged can fluctuate significantly throughout our monthly hedge periods, our hedging program cannot fully protect against foreign currency fluctuations.

Disruptions or delays involving our suppliers or increases in prices for the components, raw materials and parts that we obtain from our suppliers could have a material adverse effect on our business and consolidated results of operations.

Our operations are dependent upon the continued ability of our suppliers to deliver the components, raw materials and parts that we need to manufacture our products. In some instances, we purchase components, raw materials and parts that are ultimately derived from a single source and may be at an increased risk for supply disruptions. Any number of factors, including labor disruptions, acts of war or terrorism, military activity, trade sanctions, catastrophic weather events, the occurrence of a pandemic or other widespread illness (such as the resurgence of COVID-19), contractual or other disputes, unfavorable economic or industry conditions, transportation disruptions, delivery delays or other performance problems or financial difficulties or solvency problems, could disrupt our suppliers’ operations and performance, which could, in turn, lead to uncertainty in our supply chain or cause supply disruptions for us and disrupt our operations. If we experience supply disruptions, we may not be able to develop alternate sourcing quickly. Any disruption of our production schedule caused by an unexpected shortage of components, raw materials or parts even for a relatively short period of time could cause us to alter production schedules or suspend production entirely, which would adversely affect our business and results of operations.

The terms of our indebtedness contain a number of restrictive covenants, the breach of any of which could result in acceleration of payment of our credit facilities.

As of December 31, 2023, we had an outstanding balance of $117.5 million on our syndicated credit agreement, which was subsequently amended on February 6, 2024. This agreement, as amended, includes various covenants and restrictions and certain of these relate to the incurrence of additional indebtedness and the mortgaging, pledging or disposing of major assets. We are also required to maintain certain financial ratios on a quarterly basis. A breach of any of these covenants could impair our ability to borrow and could result in acceleration of our obligations to repay our debt if we are unable to obtain a waiver or amendment from our lenders. As of December 31, 2023, we were in compliance with all financial covenants and other provisions of the credit agreement, as amended, and our other loan agreements. Any failure to remain in compliance with any material provision or covenant of our credit agreement could result in a default, which would, absent a waiver or amendment, require immediate repayment of outstanding indebtedness under our credit facilities. We may not have or be able to obtain sufficient funds to satisfy such a repayment obligation.

If our customers delay paying or fail to pay a significant amount of our outstanding receivables, it could have a material adverse effect on our liquidity, consolidated results of operations, and consolidated financial condition.

We depend on a limited number of significant customers in our DynaEnergetics and NobelClad businesses, and the loss of one or more significant customers or the failure of a customer to pay outstanding amounts due could have a material adverse effect on our business and our consolidated results of operations. In most cases, we bill our customers for our services in arrears and are, therefore, subject to the risk that our customers will delay payment of or fail to pay our invoices. In weak economic environments, we may experience increased delays and failures due to, among other reasons, a reduction in our customers’ cash flow from operations, their access to the credit markets and rising interest rates. If our customers delay paying or fail to pay us a significant amount of our outstanding receivables, it could have a material adverse effect on our liquidity, consolidated results of operations, and consolidated financial condition.

New or existing tariffs and other trade measures could adversely affect our results of operations, financial position and cash flows.

New or existing tariffs and other trade measures could adversely affect our results of operations, financial position and cash flows, either directly or indirectly through various adverse impacts on our significant customers. In 2018, the U.S. announced tariffs of 25 percent on steel and 10 percent on aluminum imported from countries where we typically source metals. These tariffs were met with retaliatory tariffs from certain countries and increased, broader tariffs were levied by the U.S. on targeted countries, including China. Certain of these tariffs have been modified; however, impacts and uncertainties are continuing. The tariffs impacted the cost of the importation of steel, which we utilize in our steel plate and steel pipe, key materials in our NobelClad and DynaEnergetics businesses. Though in many cases we have been able to source metals from domestic suppliers, some materials are only available from sources subject to tariffs. The cost of domestic steel and aluminum has also increased, along with the price of delivery, and the availability of certain materials has been limited. These higher costs have increased the price of our products to our customers and, in some instances, affected our ability to be competitive. For our
26

Table of Contents
NobelClad business, this impacts our ability to compete on international projects and negatively impacts U.S. fabricators, which are the primary consumers of NobelClad products. Although some of these tariffs have been subsequently reduced or eliminated, as occurred in connection with the United States Mexico Canada Agreement (USMCA), many tariffs continue to exist and new tariffs have been and may be imposed at any time. The prolonged duration of tariffs, the imposition of additional tariffs and the risk of potential broader global trade conflicts could have a material adverse effect on our business, financial condition or results of operations.

Failure to attract and retain key personnel and source sufficient labor could adversely affect our current operating results.

Our continued success depends to a large extent upon the efforts and abilities of key managerial and technical employees, and our ability to secure sufficient manufacturing labor. In 2023, there were significant changes in our management team, including the appointment of Michael Kuta as Chief Executive Officer (following his prior service as Chief Financial Officer and interim co-Chief Executive Officer), the appointment of Eric Walter as Chief Financial Officer, the appointment of Brett Seger as Chief Accounting Officer, and the appointment of James Chilcoff as Arcadia Products President. Our current and future success is dependent on the retention of these and other executive officers, key employees and directors. The loss or unavailability of any key personnel could have an adverse effect on the Company’s leadership, ability to execute our strategy, financial condition and results of operations.

In order to meet the needs and expectations of our customers and to achieve our growth objectives, we must attract, train, and retain a large number of hourly associates, while at the same time controlling labor costs. These positions have historically had high turnover rates, which can lead to increased training, retention and other costs. In certain areas where we operate, there is significant competition for employees, and we must ensure that we continue to offer competitive wages, benefits and workplace conditions to retain qualified employees, which increases our labor costs. A shortage of qualified candidates who meet all legal work authorization requirements, failure to hire and retain new employees in a timely manner or higher than expected turnover levels could affect our ability to meet customer demand, grow our businesses and meet our labor cost objectives and could have impacts on employee satisfaction generally. Failure to adequately monitor and proactively respond to employee dissatisfaction could lead to higher turnover, litigation and unionization efforts, which could negatively impact our ability to meet our operating results.

A failure in our information technology systems or those of third parties, including those caused by security breaches, cyber-attacks or data protection failures, could disrupt our business, result in significant legal costs and other losses and damage our reputation.

We are dependent upon information technology systems in the conduct of our operations. Our information technology systems are subject to disruption, damage or failure from a variety of sources, including, without limitation, computer viruses, security breaches, cyber-attacks, natural disasters and defects in design. Cybersecurity incidents in particular are evolving and include, but are not limited to, malicious software, attempts to gain unauthorized access to data and banking information and other electronic security breaches that could lead to disruptions in systems, unauthorized release of confidential or otherwise protected information and the corruption of data. The risk of cybersecurity incidents may increase with political and economic instability or warfare (including the ongoing hostilities between Russia and Ukraine). Various measures have been implemented to manage our risks related to information technology systems and network disruptions. However, given the unpredictability of the timing, nature and scope of information technology disruptions, we could potentially be subject to production downtimes, operational delays, the compromising of confidential or otherwise protected information, destruction or corruption of data, security breaches, theft, other manipulation or improper use of our systems and networks or financial losses from remedial actions, any of which could have a material adverse effect on our cash flows, competitive position, financial condition or results of operations. In addition, a data breach could result in negative publicity which could damage our reputation and have an adverse effect on our results of operations and our stock price.

We outsource certain technology and business process functions to third parties and may increasingly do so in the future. If we do not effectively develop, implement and monitor our outsourcing strategy, if third party providers do not perform as anticipated or if we experience technological or other problems with a transition, we may not realize productivity improvements or cost efficiencies and may experience operational difficulties, increased costs and loss of business. Our outsourcing of certain technology and business processes to third parties may expose us to enhanced risks related to data security, which could result in monetary and reputational damages. In addition, our ability to receive services from third party providers may be impacted by cultural differences, political instability, and unanticipated regulatory requirements or policies. As a result, our ability to conduct our business may be adversely affected.

27

Table of Contents
Failure to establish and maintain adequate internal controls over financial reporting could result in the inability to report our financial results in a timely and reliable manner, which could harm our business and impact the value of our securities.

We depend on our ability to produce accurate and timely financial statements in order to run our business. If we fail to do so, our business could be negatively affected and our independent registered public accounting firm may be unable to attest to the fair presentation of our Consolidated Financial Statements in accordance with U.S. generally accepted accounting principles (“GAAP”) and the effectiveness of our internal control over financial reporting, as required by Section 404 of the Sarbanes-Oxley Act. Effective internal controls are necessary for us to provide reliable financial reports and to effectively prevent fraud. If we cannot provide reliable financial reports and effectively prevent fraud, our reputation and operating results could be harmed. Even effective internal controls have inherent limitations including the possibility of human error, the circumvention or overriding of controls, or fraud. Therefore, even effective internal controls can provide only reasonable assurance with respect to the preparation and fair presentation of financial statements. In addition, projections of any evaluation of effectiveness of internal control over financial reporting in future periods are subject to the risk that the control may become inadequate because of changes in conditions or a deterioration in the degree of compliance with the policies or procedures.

If we fail to maintain adequate internal controls, including any failure to implement new or improved controls as may be required by acquisitions or other changes in our business, or if we experience difficulties in their execution, we could fail to meet our reporting obligations, and there could be a material adverse effect on our business and financial results. In the event that our current internal control practices deteriorate, we may be unable to accurately report our financial results or prevent fraud, and investor confidence and the market price of our stock may be adversely affected.

Legal and Regulatory Risks

Our operations require us to comply with numerous laws and regulations, violations of which could have a material adverse effect on our consolidated results of operations, financial condition or cash flows.

Our operations are subject to international, regional, national, and local laws and regulations in every place where we operate, relating to matters such as environmental protection, health and safety, labor and employment, import/export controls, currency exchange, bribery and corruption, data privacy and cybersecurity, intellectual property, immigration, and taxation. These laws and regulations are complex, frequently change, and have tended to become more stringent over time. In the event the scope of these laws and regulations expands in the future, the incremental cost of compliance could adversely affect our consolidated financial condition, consolidated results of operations, or consolidated cash flows.

Our international operations are subject to anti-corruption and anti-bribery laws and regulations, such as the FCPA, the U.K. Bribery Act and other similar laws. We are also subject to trade control regulations and trade sanctions laws that restrict the movement of certain goods to, and certain operations in, various countries or with certain persons. These trade regulations and laws can include restrictions on selling or importing goods, services or technology in or from affected regions, travel bans and asset freezes impacting connected individuals and political, military, business and financial organizations and can change very quickly, such as has occurred in connection with Russia’s invasion of Ukraine. Our ability to transfer people, products and data among certain countries is subject to maintaining required licenses and complying with these laws and regulations.

The internal controls, policies and procedures, and employee training and compliance programs we have implemented to deter prohibited practices may not be effective in preventing employees, contractors or agents from violating or circumventing such internal policies or from material violations of applicable laws and regulations. Any determination that we have violated or are responsible for violations of anti-bribery, trade control, trade sanctions or anti-corruption laws could have a material adverse effect on our financial condition. Violations of international and U.S. laws and regulations or the loss of any required licenses may result in fines and penalties, criminal sanctions, administrative remedies or restrictions on business conduct, and could have a material adverse effect on our business, operations and financial condition. In addition, any major violations could have a significant effect on our reputation and consequently on our ability to win future business and maintain existing customer and supplier relationships.

The use of explosives in our DynaEnergetics and NobelClad manufacturing processes and products subject us to additional environmental, health and safety laws and any accidents or injuries could subject us to significant liabilities.

DynaEnergetics uses explosive materials in its manufacturing processes and products. NobelClad’s manufacturing process involves the detonation of large quantities of explosives. The use of explosives is an inherently dangerous activity. These activities subject us to extensive environmental and health and safety laws and regulations including guidelines and regulations for the purchase, manufacture, handling, transport, storage and use of explosives issued by the U.S. Bureau of
28

Table of Contents
Alcohol, Tobacco and Firearms; the Federal Motor Carrier Safety regulations set forth by the U.S. Department of Transportation; the Safety Library Publications of the Institute of Makers of Explosive; and similar guidelines of their European counterparts. In Germany, the transport, storage and use of explosives is governed by a permit issued under the Explosives Act (Sprengstoffgesetz).

Despite our use of specialized facilities to store and handle dangerous materials and our employee training programs, the storage and handling of explosive materials could result in explosive incidents that temporarily shut down or otherwise disrupt our or our customers’ operations or cause restrictions, delays or cancellations in the delivery of our services. It is possible that such an explosion could result in death or significant injuries to employees and other persons. Material property damage to us, our customers and third parties arising from an explosion or resulting fire could also occur. Any explosion could expose us to adverse publicity and liability for damages or cause production restrictions, delays or cancellations, any of which could have a material adverse effect on our operating results, financial condition and cash flows. Moreover, failure to comply with applicable requirements or the occurrence of an explosive incident may also result in the loss of our license to store and handle explosives, which would have a material adverse effect on our business, results of operations and financial conditions.

Demand for our products could be reduced by existing and future legislation, regulations and public sentiment.

Regulatory agencies and environmental advocacy groups in the United States, the E.U., and other regions or countries have been focusing considerable attention on the emissions of carbon dioxide, methane and other greenhouse gases and their role in climate change. There is also increased focus, including by governments and our customers, investors and other stakeholders, on these and other sustainability and energy transition matters. Existing or future legislation and regulations related to greenhouse gas emissions and climate change, as well as initiatives by governments, non-governmental organizations, and companies to conserve energy or promote the use of alternative energy sources, and negative attitudes toward or perceptions of fossil fuel products and their relationship to the environment, may significantly curtail demand for and production of oil and gas in areas of the world where our customers operate, and thus reduce future demand for some of our products.

In addition, some international, national, state and local governments and agencies have also adopted laws and regulations or are evaluating proposed legislation and regulations that are focused on directly limiting the extraction of shale gas or oil using hydraulic fracturing. These laws and regulations could limit oil and gas development, lead to operational delays and increased costs for our customers, and therefore reduce demand for our products. Such reductions in demand for our products may, in turn, adversely affect our financial condition, results of operations and cash flows.

Increased negative investor sentiment toward oil and gas and preference for assets outside of traditional energy sectors could lead to higher capital costs for our customers and reduced investment in fossil fuels, thereby reducing demand for our products. Such preferences could also impact our ability to obtain acceptable debt or equity financing on attractive terms or at all and could negatively impact our stock price over time. Our business, reputation and demand for our stock could be negatively affected if we do not (or are perceived to not) act responsibly with respect to sustainability matters.

We are subject to extensive environmental, health and safety laws and failure to comply with such laws and regulations could result in restrictions or prohibitions on our facilities, substantial civil or criminal liabilities and could have a material adverse effect on our business, consolidated results of operations, and consolidated financial condition.

We are subject to extensive environmental, health and safety regulation in the United States and the other countries where our manufacturing facilities are located. Among other things, these laws regulate the emissions or discharge of materials into the environment; govern the use, storage, treatment, disposal and management of hazardous substances and wastes; protect the health and safety of our employees; regulate the materials used in our products or manufacturing processes; and impose liability for the costs of investigating and remediating (as well as other damages resulting from) present and past releases of hazardous substances. Representative laws and regulations which we may be subject to the in the U.S. include: noise abatement and air emissions regulations, the Comprehensive Environmental Response, Compensation and Liability Act of 1980, the Resource Conservation and Recovery Act (“RCRA”) and comparable state laws, and various regulations and laws enforced by the U.S Department of Labor, the U.S. Department of Commerce, and the U.S. Environmental Protection Agency and their state equivalents. Violations of these laws or of any conditions contained in environmental permits can result in substantial fines or penalties, injunctive relief, requirements to install pollution controls or other equipment, and civil sanctions. We could be held liable for costs to investigate, remediate or otherwise address contamination at any real property we have ever owned, operated or used as a disposal site, or at other sites where we or predecessors may have released hazardous materials. We could incur fines, penalties or sanctions or be subject to third-party claims, including indemnification claims, for property damage, personal injury or otherwise as a result of violations of (or liabilities under) environmental, health and safety laws, or in connection with releases of hazardous or other materials.
29

Table of Contents

Changes in or new interpretations of existing laws, regulations or enforcement policies, the discovery of previously unknown contamination, or the imposition of other environmental liabilities or obligations in the future including additional investigation, remediation or other obligations with respect to our products or business activities may lead to additional compliance costs or require us to change our manufacturing processes, which could have a material adverse effect on our business, financial condition or results of operations.

In Germany, we and all our activities are subject to various safety and environmental regulations of the federal state which are enforced by the local authorities, including the Federal Act on Emission Control (Bundes-Immissionsschutzgesetz). The Federal Act on Emission Control permits are held by companies jointly owned by DynaEnergetics and the other companies that are located at the Troisdorf manufacturing site and are for an indefinite period of time. The Dillenburg, Germany facility is operated based on a specific permit granted by the local mountain authority and must be renewed every three years. Any failure to comply with current and future environmental and safety regulations could subject us to significant liabilities. Any actual or alleged violations of environmental, health or safety laws could result in restrictions or prohibitions on our facilities or substantial civil or criminal sanctions. In addition, under certain environmental laws, we could be held responsible for all of the costs relating to any contamination at our facilities and at third party waste disposal sites, even when such contamination was caused by a predecessor and even when the actions resulting in the contamination were lawful at the time. We could also be held liable for any and all consequences arising out of human exposure to hazardous substances or other environmental damage.

Failure to comply with applicable federal, state and local employment and labor laws and regulations could have a material, adverse impact on our business.

Various federal, state and local employment and labor laws and regulations govern our relationships with our employees, and similar laws and regulations apply to our operations outside of the U.S. These laws and regulations relate to matters such as employment discrimination, wage and hour laws, requirements to provide and document meal and rest periods or other benefits, family leave mandates, requirements regarding working conditions and accommodations to certain employees, citizenship or work authorization and related requirements, insurance and workers’ compensation rules, healthcare laws and anti-discrimination and anti-harassment laws. We incur substantial costs to comply with these laws and regulations and non-compliance could expose us to significant liabilities. For example, Arcadia Products is currently defending a lawsuit in California alleging violations of wage and hour regulations with respect to certain temporary and permanent employees. We are incurring legal costs to defend this action and may in the future be required to defend similar actions, and we could incur losses from these and similar cases, and the amount of such losses or costs could be material.

Several jurisdictions also have implemented sick pay and paid time off legislation, which requires employers to provide paid time off to employees, and “just cause” termination legislation, which restricts companies’ ability to terminate employees or reduce employees’ hours unless they can prove “just cause” or a “bona fide economic reason” for the termination or reduction in hours. All of these regulations impose additional obligations on us and our failure to comply with any of these regulations could subject us to penalties and other legal liabilities, which could adversely affect our business and results of operations.

The regulatory environment governing information, data security and privacy is increasingly demanding and evolving and a data security breach could result in litigation, enforcement actions and related penalties and fines.

The regulatory environment surrounding information security and privacy is increasingly demanding. We are subject to numerous U.S. federal and state laws and non-U.S. laws and regulations governing the protection of personal and confidential information of our customers and employees. The regulatory framework for privacy and security issues worldwide is rapidly evolving and is likely to remain uncertain for the foreseeable future.

Several U.S. states have passed comprehensive privacy laws that have recently become effective. Of note among them is the California Consumer Privacy Rights Act (CPRA), which amends and expands the California Consumer Privacy (CCPA). The CPRA, which went into effect on January 1, 2023, along with the CCPA, governs the transmission, security and privacy of California residents’ personal information. The CPRA has a twelve month look-back period for enforcement purposes. Among many new requirements, the CPRA creates a category for sensitive data including health and other personal information that requires additional safeguards and disclosures. In addition, the CPRA expands consumers’ rights and has enhanced enforcement mechanisms such as the creation of a California Privacy Protection Agency that will investigate and enforce the CPRA and its promulgating regulations. The states of Virginia, Colorado, Connecticut and Utah have also recently enacted omnibus data privacy laws. In addition, many other proposals exist in states across the U.S. that could increase our potential liability and increase our compliance costs. Aspects of these state privacy statutes remain unclear, resulting in further legal uncertainty and potentially requiring us to modify our data practices and policies and to incur substantial additional compliance costs.
30

Table of Contents

In addition, the recently adopted SEC final cybersecurity rule requires, among other things, comprehensive disclosure regarding oversight of cybersecurity risks and increased monitoring and reporting of data security incidents.

Internationally, the European Data Protection Board has released guidelines on enforcement and fines related to the General Data Protection Regulation (GDPR). The guidelines suggest a tougher stance on enforcement and stiffer fines for companies that violate the GDPR. This is in addition to the continued complexities involving the transfer of personal data from Europe to the U.S. following the Schrems II decision. In July 2023, the European Commission announced a new Trans-Atlantic data privacy framework, Privacy Shield 2.0, which may require additional compliance efforts from our company.

As international data privacy and protection laws continue to evolve, and as new regulations, interpretive guidance and enforcement information become available, we may incur incremental costs to modify our business practices to comply with these requirements. In addition, our internal control policies and procedures may not always protect us from reckless, intentional or criminal acts committed by our employees or agents.

Violations of these laws, or allegations of such violations, could subject us to criminal or civil, monetary or non-monetary penalties, disrupt our operations, involve significant management distraction, subject us to class action lawsuits and result in a material adverse effect on our business, financial condition and results of operations.

Legal, regulatory or market measures to address climate change, including proposals to restrict emissions of GHGs and other sustainability initiatives, could have an adverse impact on the Company’s business and results of operations.

Various legislative, regulatory, and inter-governmental proposals to restrict emissions of GHGs, such as carbon dioxide (“CO2”), are under consideration by governmental legislative bodies and regulators in the jurisdictions where we operate. Such regulatory and global initiatives may require us to modify our operating procedures, incur capital expenditures, change fuel sources, or take other actions that may adversely affect our financial results. Increasing regulations to reduce GHG emissions, as proposed throughout many of our operating regions, would be expected to increase energy costs, reduce energy availability and increase price volatility for energy.

The heightened stakeholder focus on Environmental, Social, and Governance, or “ESG,” issues related to our businesses requires the continuous monitoring of various and evolving laws, regulations, standards and expectations and the associated reporting requirements. Specifically, certain stakeholders are beginning to require that we provide information on our plans relating to certain climate-related matters such as greenhouse gas emissions, and we expect this trend to continue and be amplified by the potential adoption of the proposed SEC regulations relating to climate change disclosure. A failure to adequately or timely meet stakeholder expectations and reporting requirements may result in noncompliance with any imposed regulations, the loss of business, reputational impacts, diluted market valuation, an inability to attract and retain customers, and an inability to attract and retain top talent. In addition, our adoption and the reporting of certain standards or mandated compliance to certain requirements could necessitate additional investments that could impact our profitability.

Further, we have established and publicly disclosed other ESG targets and goals and other sustainability commitments that are subject to a variety of assumptions, risks and uncertainties. If we are unable to meet these targets, goals or commitments on our projected timelines or at all, or if they are not perceived to be sufficiently robust, our reputation as well as our relationships with investors, customers and other stakeholders could be harmed, which could in turn adversely impact our business and results of operations. In addition, not all of our competitors may seek to establish climate or other ESG targets and goals, or at a comparable level to ours, which could result in our competitors achieving competitive advantages through lower supply chain or operating costs.

Changes in or interpretation of tax law could impact the determination of our income tax liabilities for a tax year.

We are subject to income taxes in the U.S. and certain foreign jurisdictions. Significant judgment is required in determining our worldwide provision for income taxes. In the course of our business, there are many transactions and calculations where the ultimate tax determination is subjective or uncertain. We earn a significant amount of our operating income outside the U.S and have significant intercompany transactions between our affiliates. A change in the mix of earnings and losses in countries with differing statutory tax rates, changes in our business or structure, or disputes about intercompany transfer pricing arrangements may result in higher effective tax rates for the Company.

Our future effective tax rates could be adversely affected by changes in tax laws or their interpretation, both domestically and internationally. For example, regulations related to the 2017 United States Tax Cuts and Jobs Act (“TCJA”) are still being
31

Table of Contents
developed, some with retroactive application. As regulations and guidance evolve with respect to tax law, our results may differ from previous estimates and may materially affect our financial condition or results of operations. The OECD/G20 Base Erosion and Profit Shifting Project (or BEPS Project) is developing an international framework to combat tax avoidance by multinational enterprises and countries where the Company is subject to taxes are independently evaluating their corporate tax policy. Tax legislation and enforcement could adversely impact the Company’s tax provision and the value of deferred tax assets and liabilities.

We are under audit by tax authorities in different jurisdictions from time to time. Although we believe that our provision for income taxes and our tax estimates are reasonable, tax authorities may disagree with certain positions we have taken. In addition, economic and political pressures to increase tax revenue in various jurisdictions may make resolving tax disputes favorably more difficult. The final resolution of any audits or litigation may differ from the amounts recorded in our Consolidated Financial Statements and may materially affect our Consolidated Financial Statements in the period or periods in which that determination is made.

Intellectual Property Risks

Our failure to protect our proprietary information and any successful intellectual property challenges against us could materially and adversely affect our competitive position.

The protection of our intellectual property rights is essential to maintaining our competitive position and recognizing the value of our investments in technology and intellectual property in our existing and future products. We rely on trade secret protection for certain aspects of our technology, in part through confidentiality and other written agreements with our employees, consultants and third parties. Through these and other written agreements, we attempt to control access to and distribution of our intellectual property documentation and other proprietary technology information. Despite our efforts to protect our proprietary rights, former employees, consultants or third parties may, in an unauthorized manner, attempt to use, copy or otherwise obtain and market or distribute our intellectual property rights or technology or otherwise develop a product with the same functionality as our technology. Policing unauthorized use of our intellectual property rights is difficult, and nearly impossible on a worldwide basis. Therefore, we cannot be certain that the steps we have taken or will take in the future will prevent misappropriation of our technology or intellectual property rights.

We also actively pursue patent protection for our proprietary technology and intellectual property where appropriate for protecting our competitive position. The process of seeking patent protection can be long and expensive and we cannot be certain that any currently pending or future applications will actually result in issued patents, or that, even if patents are issued, they will be respected by third parties. In addition, our competitors may be able to develop technology independently that is similar to ours without infringing on our patents or gaining access to our trade secrets, and this could have a similar effect on our competitive position.

Intellectual property litigation and threats of litigation are becoming more common in the oilfield services industry. We are currently involved and may in the future be involved in litigation, in the United States or abroad, to enforce our patents or other intellectual property rights or to protect our trade secrets and know-how. These actions can require multiple years to come to resolution or settlement, and even if we ultimately prevail, we may be unable to realize adequate protection of our competitive position. In addition, these actions commonly result in actions by the affected third parties to establish the invalidity of our patents. While we intend to prosecute these actions vigorously, there is no guarantee of success, and such effort takes significant financial and management resources from the Company. In the event that one or more of our patents are challenged, a court or the United States Patent and Trademark Office (USPTO) may invalidate the patent(s) or determine that the patent(s) is not enforceable, which could harm our competitive position. If our patents are invalidated, or if the scope of the claims in any of these patents is limited by a court or USPTO decision, we could be prevented from pursuing certain litigation matters or licensing the invalidated or limited portion of such patents. Such adverse decisions could negatively impact our future revenue. Patent litigation, if necessary or when instituted against us, could result in substantial costs and divert our management’s attention and resources.

We may incur substantial costs defending against third parties alleging that we infringe their proprietary rights.

We are currently involved and may in the future be involved in litigation relating to alleged infringement by us of others’ patents or other intellectual property rights. We have an active "freedom to operate" review process for our technology, but there is no assurance that future infringement claims will not be asserted. Infringement claims generally result in significant legal and other costs and may distract management from running our core businesses even if we are ultimately successful. In the event of any adverse ruling in any intellectual property litigation, we could be required to pay substantial damages, cease the manufacturing, use and sale of infringing products, discontinue the use of certain processes or obtain a license from the third-
32

Table of Contents
party claiming infringement with royalty payment obligations by us. We also have certain indemnification obligations to customers with respect to the infringement of third-party intellectual property rights by our products, which may increase our costs. Any of these occurrences could significantly harm our competitive position, results of operations, financial position and cash flows.

Risks Related to Acquisitions

We have incurred debt to finance the acquisition of 60% of Arcadia Products and may incur additional substantial financial obligations in connection with the acquisition of the remaining 40% of Arcadia Products.

We financed a portion of the purchase price of the Arcadia Products acquisition with proceeds from our credit facility. Our ability to service the indebtedness under the credit facility and to maintain compliance with the covenants included in the credit facility will depend on our success in achieving the intended benefits of the acquisition, which is subject to numerous risks and uncertainties as discussed above. We will have to devote a substantial portion of our cash flow to meet required payments of principal and interest on this indebtedness, and if we are unable to generate sufficient cash flow to do so, or if we otherwise fail to comply with the terms of the credit facility, we could be in default under the agreement.

In addition, as early as three years after the closing of the Arcadia Products acquisition, we may be required to pay the Option Purchase Price for some or all of Munera’s interests in Arcadia Products if Munera exercises the Put Option. Even if we elect to pay 80% of the Option Purchase Price in preferred stock, we will need to fund the remaining portion in cash. We recently amended our credit facility, increasing the total facility amount to $300 million from our prior facility of $200 million. While the increase in the credit facility was intended to allow us to finance the Option Purchase Price, a potential exercise will depend on numerous factors, including the performance of our businesses, the status of any changes to our businesses and general market and economic conditions. If we fail to pay the Option Purchase Price when required under the Operating Agreement, we will be in default under the agreement. The Option Purchase Price is likely to be substantial relative to the current size of our business. In addition, the Option Purchase Price is subject to a defined “floor” value in the Operating Agreement, which is based primarily upon a contractually stated equity value. The floor value will apply even if Arcadia Products' performance fails to meet our expectations, and we may find it difficult to obtain additional financing, if needed, for the payment of the Option Purchase Price. In addition, debt or preferred equity financing, if obtained, may involve agreements that include liens or restrictions on our assets and covenants limiting or restricting our ability to take specific actions, such as paying dividends or making distributions, incurring additional debt, acquiring or disposing of assets or increasing expenses. Debt financing would also be required to be repaid regardless of our operating results. Obtaining financing through issuances of common stock would impose fewer restrictions on our future operations but would be dilutive to the interests of existing stockholders.

DMC is the majority shareholder of Arcadia Products, and our interest in Arcadia Products is subject to the risks normally associated with the conduct of businesses with a minority shareholder.

Pursuant to the Equity Purchase Agreement pursuant to which we acquired a 60% ownership stake in Arcadia Products, Munera continues to hold 40% of the outstanding equity interests of Arcadia Products. Our Operating Agreement governs our relationship with Munera, and we believe the Operating Agreement provides us with effective and sufficient control of Arcadia Products to allow the business to be operated consistent with our goals and values and with sufficient opportunity for profitable growth. Nevertheless, conducting a business with minority owners may lead to certain risks and uncertainties, which could have an adverse impact on our ability to profitably grow the Arcadia Products business, which could have a material adverse impact on our future cash flows, earnings, results of operations and financial condition. These include:

our ability to effectively control certain strategic, operational and financial decisions;
the potential for disagreement over the direction of the company and costs and expenses involved; and
the risk of having economic or business interests or goals that are inconsistent with, or opposed to, those of Munera.

There can be no assurance that the acquisition will be beneficial to us, whether due to the above-described risks, unfavorable economic conditions, integration challenges or other factors.

To the extent that we seek to further expand our business through acquisitions, we may experience issues in executing acquisitions or integrating acquired operations.

From time to time, we examine opportunities to make selective acquisitions in order to increase shareholder return by increasing our total available markets, expanding our existing operations and, potentially, generating synergies. The success of any acquisition depends on a number of factors, including, but not limited to:
33

Table of Contents

identifying suitable candidates for acquisition and negotiating acceptable terms;
obtaining approval from regulatory authorities and potentially DMC’s shareholders;
maintaining our financial and strategic focus and avoiding distraction of management during the process of integrating the acquired business;
implementing our standards, controls, procedures and policies at the acquired business and addressing any pre-existing liabilities or claims involving the acquired business;
our ability to realize the expected tax treatment or tax benefits from the transaction; and
to the extent the acquired operations are in a country in which we have not operated historically, understanding the regulations and challenges of operating in that new jurisdiction.

For example, our due diligence process may not reveal all liabilities associated with a potential acquisition, and this could result in us incurring unanticipated losses after the acquisition is completed. There can be no assurance that we will be able to conclude any acquisitions successfully or that any acquisition will achieve the anticipated synergies or other positive results. Any material problems that we encounter in connection with such an acquisition could have a material adverse effect on our business, results of operations and financial position.

Risk Factors Related to Our Common Stock

The price and trading volume of our common stock may be volatile, which may make it difficult for you to resell the common stock when you want or at prices you find attractive.

The market price and trading volume of our common stock may be subject to significant fluctuations due to general stock market conditions and/or a change in sentiment in the market regarding our operations, business prospects or liquidity. Among the factors that could affect the price of our common stock are:

changes in the architectural building products, oil and gas, industrial, or infrastructure markets;
operating and financial performance that vary from the expectations of management, securities analysts or investors;
developments in our business or in our business sectors generally;
regulatory changes affecting our industries generally or our business and operations;
the operating and stock price performance of companies that investors consider to be comparable to us;
announcements of strategic developments, acquisitions and other material events by us or our competitors;
our ability to integrate and operate the companies and the businesses that we acquire;
rumors and market speculation regarding our industries, business or trading activity;
significant amounts of short selling, the perception that short sales could occur and other speculative trading activity;
activism by any large stockholder or group of stockholders;
new positions adopted by investor stewardship groups and proxy advisory firms regarding desired ESG disclosures, policies, ranking systems and other initiatives;
changes in global financial markets and global economies and general market conditions, including volatility in foreign exchange rates, tariffs and stock, commodity, credit or asset valuations, and government actions or shutdowns.

The stock markets in general have experienced extreme volatility that has at times been unrelated to the operating performance of particular companies, and these fluctuations may adversely affect the trading price of our common stock.

ITEM 1B.                                       Unresolved Staff Comments

None.

ITEM 1C.                                       Cybersecurity

The Board, in coordination with the Risk Committee, oversees the Company's risk management program, which includes risks arising from cybersecurity threats. DMC’s Chief Information Officer (CIO) manages the Company’s cybersecurity program and is responsible for leading and coordinating cybersecurity activities across the organization. The CIO reports directly to our Chief Executive Officer and has extensive information technology experience.

Led by our CIO, we conduct regular assessments to identify potential cybersecurity risks and vulnerabilities, including the evaluation of systems and data assets. We have established internal procedures to stay vigilant against evolving threats by monitoring network traffic and conducting security audits. We also regularly engage independent assessors and external
34

Table of Contents
consultants who specialize in cybersecurity to conduct thorough, unbiased evaluations of our systems, policies, and procedures. These assessments help us ensure that our cybersecurity practices are aligned with applicable regulations and standards. To further evaluate our cybersecurity defenses, we periodically commission penetration exercises conducted by specialized firms. These tests simulate real-world attacks and assist in assessing our internal readiness and response capabilities.

We are proactively taking steps to enhance our monitoring of third-party service providers’ cybersecurity, including the commencement of a vendor third-party risk management program. This program should better enable the Company to identify and manage material risks from cybersecurity threats related to our third-party service providers.

Cybersecurity risk updates are provided quarterly to our senior management team by the CIO as part of our enterprise risk management process. We have established an incident response policy that outlines the process for assessing and responding to cybersecurity incidents. The incident response policy is reviewed at least annually by executive management. The Board also receives quarterly updates on cybersecurity risks. These reports are typically presented by our CIO to the Risk Committee of the Board and include updates to recently completed cybersecurity initiatives, upcoming plans, an overview of current threats, as well as discussion of our overall cybersecurity maturity and readiness. The Board participates in simulated cybersecurity trainings and is kept apprised of changes in cybersecurity regulatory requirements, ensuring that our organization remains in compliance with relevant standards.

Cybersecurity risks and threats, including as a result of any previous cybersecurity incidents, have not materially impacted and are not reasonably expected to materially impact us or our operations. However, we recognize the ever-evolving cyber risk landscape and cannot provide any assurances that we will not be subject to a material cybersecurity incident in the future. See Item 1A. Risk Factors “A failure in our information technology systems or those of third parties, including those caused by security breaches, cyber-attacks or data protection failures, could disrupt our business, result in significant legal costs and other losses and damage our reputation” for a discussion of cybersecurity-related risks.

ITEM 2.                                       Properties

Corporate Headquarters
 
Our corporate headquarters currently are located in Broomfield, Colorado. The office is also used for NobelClad’s U.S. administrative offices.
Location Property Type Property Size Owned/Leased Expiration Date of Lease
(if applicable)
Broomfield, ColoradoCorporate and Sales Office18,284 sq. ft.LeasedSeptember 30, 2029, with renewal option for 60 months

35

Table of Contents
Arcadia Products
 
Arcadia Products owns a manufacturing site and sales office in Vernon, California and leases other manufacturing and distribution centers throughout the United States. The table below summarizes Arcadia Products' material properties, including their location, type, size, whether owned or leased and expiration terms, if applicable.

Location Property Type Property Size Owned/Leased Expiration Date of Lease
(if applicable)
Vernon, CaliforniaCorporate office, metal shop building, warehouse26,500 sq. ft.Owned
Land for office, paint shop, anodizing line0.8 acreOwned
Land for office, paint shop, anodizing line2.24 acresLeasedMay 31, 2046
Vernon, CaliforniaLand for parking39,545 sq. ft.LeasedMarch 31, 2027
Vernon, California(1)
Office, paint shop112,000 sq. ft.LeasedDecember 22, 2026, with renewal option for 60 months
Vernon, California(1)
Office, warehouse110,677 sq. ft.
Leased
December 22, 2026, with renewal option for 60 months
Hayward, California(1)
Distribution, light assembly
45,624 sq. ft.LeasedDecember 22, 2024, with renewal option for 36 months
West Sacramento, California(1)
Distribution, light assembly
16,000 sq. ft.
LeasedDecember 22, 2024, with renewal option for 36 months
Stamford, Connecticut(1)
Office, warehouse39,418 sq. ft.LeasedDecember 22, 2025
Phoenix, Arizona(1)
Office, warehouse51,986 sq. ft.LeasedDecember 22, 2026, with renewal option for 24 months
Las Vegas, Nevada(1)
Office, warehouse
88,915 sq. ft.
Leased
December 22, 2026, with renewal option for 24 months
Tucson, Arizona(1)
Office, paint shop, warehouse
106,507 sq. ft.
LeasedDecember 22, 2026, with renewal option for 60 months
Waipahu, Hawaii
Distribution, light assembly
Building: 12,746 sq. ft.
Land: 21,872 sq. ft.
Leased
May 31, 2028
South Gate, CaliforniaOffice, manufacturing45,700 sq. ft.LeasedDecember 31, 2027
South Gate, CaliforniaOffice, manufacturing, storageBuilding: 25,000 sq. ft.
Land: 45,000 sq. ft.
LeasedApril 30, 2027
Houston, Texas
Office, warehouse43,412 sq. ft.LeasedNovember 30, 2028, with renewal option for 60 months
Dallas, Texas
Office, warehouse86,731 sq. ft.LeasedNovember 30, 2025, with renewal option for 60 months
Kent, WashingtonDistribution, light assembly25,000 sq. ft.LeasedMay 31, 2029

(1) These leases are with entities affiliated with the holder of the redeemable noncontrolling interest and the former president of Arcadia Products. During the year-ended December 31, 2023, DMC recorded $4,625 in lease expense related to these properties.

36

Table of Contents
DynaEnergetics
 
DynaEnergetics leases a manufacturing site and sales office in Troisdorf, Germany. The leases for these properties expire on December 31, 2025, and we are negotiating future renewal options. In the U.S., DynaEnergetics owns manufacturing and assembly sites in Texas and leases storage bunkers and office and warehouse space in various cities throughout Texas. DynaEnergetics also leases office and warehouse space and bunkers for storage of its explosives in Alberta, Canada.

The table below summarizes DynaEnergetics' material properties, including their location, type, size, whether owned or leased and expiration terms, if applicable.
Location Property Type Property Size Owned/Leased Expiration Date of Lease
(if applicable)
Troisdorf, Germany Manufacturing and administration office Manufacturing: 263,201 sq. ft.
Office: 2,033 sq. ft.
 Leased December 31, 2025
Troisdorf, Germany Office 9,203 sq. ft. Leased December 31, 2025
Liebenscheid, GermanyManufacturing and office5,511 sq. ft.Owned
Liebenscheid, GermanyLand77,672 sq. ft.Owned
Houston, TexasOffice11,370 sq. ft.LeasedNovember 30, 2026
Blum, TexasOffice, warehouse, and manufacturing83,000 sq. ft.Owned
Blum, Texas(a)
Warehouse10,000 sq. ft.Owned
Blum, TexasLand for office, warehouse, and manufacturing284 acresOwned
Midland, TexasLand13.3 acresLeasedApril 1, 2029
Whitney, TexasOffice, warehouse, and manufacturing36,000 sq. ft.Owned
Alberta, CanadaOffice and warehouse7,650 sq. ft.LeasedAugust 31, 2025

(a) The Blum, Texas warehouse is separate from the main Blum manufacturing campus.

37

Table of Contents
NobelClad
 
NobelClad owns its principal domestic manufacturing site, which is located in Mount Braddock, Pennsylvania. We currently lease our primary domestic shooting site, which is located in Dunbar, Pennsylvania, and we also have license and risk allocation agreements relating to the use of a secondary shooting site, Coolspring, that is located within a few miles of the Mount Braddock facility. The shooting site in Dunbar and the nearby secondary shooting site support our Mount Braddock facility. The lease for the Dunbar property will expire on December 15, 2025, but we have options to renew the lease which would then extend through December 15, 2029. The license and risk allocation agreements will expire on March 31, 2028. 

NobelClad owns a manufacturing site in Liebenscheid, Germany as well as a mine used as a shooting site in Dillenburg, Germany. We purchased the buildings and land around the Dillenburg mine in 2022. NobelClad leases the building housing its sales and administrative office in Perpignan, France.

The table below summarizes NobelClad's material properties, including their location, type, size, whether owned or leased and expiration terms, if applicable. 
Location Property Type Property Size Owned/Leased Expiration Date of Lease
(if applicable)
Mt. Braddock, PennsylvaniaClad plate manufacturing and administration office Land: 14 acres
Buildings: 101,300 sq. ft.
 Owned  
Dunbar, Pennsylvania Clad plate shooting site Land: 322 acres
Buildings:
15,960 sq. ft.
 Leased December 15, 2025, with renewal options through December 15, 2029
Cool Spring, PennsylvaniaClad plate shooting site1,200,000 sq. ft.LeasedMarch 31, 2028, with renewal options through March 31, 2033
Canonsburg, PennsylvaniaManufacturing16,000 sq. ftLeasedNovember 30, 2024, with renewal options for two additional 12-month periods
Tautavel, France(a)
 Clad shooting site 116 acres Owned 
Perpignan, FranceAdministration and sales office3,671 sq. ftLeasedSeptember 30, 2029, with renewal options for additional three-year periods.
Burbach-Würgendorf, GermanyStorage224 sq. metersLeasedDecember 31, 2050
Dillenburg, Germany Clad plate shooting site Land: 18.9 acres
Buildings:
46,285 sq. ft.
 
 Owned
 
  
Liebenscheid, GermanyManufacturingLand: 10.47 acres
Buildings: 125,394 sq. ft.
Owned
(a) Though NobelClad is no longer performing manufacturing activities in France, it owns this land in order to have access to a redundant shooting site.

ITEM 3.                Legal Proceedings

Refer to Note 12 within Part II, Item 8 — Financial Statements and Supplementary Data.

ITEM 4.                Mine Safety Disclosures
 
Our Coolspring property is subject to regulation by the Federal Mine Safety and Health Administration ("MSHA") under the Federal Mine Safety and Health Act of 1977 (the "Mine Act"). Pursuant to Section 1503(a) of the Dodd-Frank Wall Street Reform and Consumer Protection Act (the "Dodd-Frank Act"), issuers that are operators, or that have a subsidiary that is an operator, of a coal or other mine in the United States are required to disclose in their periodic reports filed with the SEC information regarding specified health and safety violations, orders and citations, related assessments and legal actions, and mining-related fatalities. During the year ended December 31, 2023, we had no such specified health and safety violations, orders or citations, related assessments or legal actions, mining-related fatalities, or similar events in relation to our United States operations requiring disclosure pursuant to Section 1503(a) of the Dodd-Frank Act.
38

Table of Contents
PART II

ITEM 5.    Market for Registrant's Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

Our common stock is publicly traded on The Nasdaq Global Select Market (“Nasdaq”) under the symbol “BOOM.” As of February 20, 2024, there were 210 holders of record of our common stock (does not include beneficial holders of shares held in “street name”).

Equity Compensation Plan

Refer to “Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters” for information regarding securities authorized for issuance under our equity compensation plans, which is incorporated in this Item by this reference.

Issuer Purchases of Equity Securities

During the quarter ended December 31, 2023, we purchased shares of common stock as follows. These shares are held as treasury shares by the Company.
Total number of shares purchased (1) (2)
Average price paid per share
October 1 to October 31, 20232,138 $18.72 
November 1 to November 30, 2023— $— 
December 1 to December 31, 20236,225 $18.81 
Total8,363 $18.79 

(1) Share purchases during the period were to offset tax withholding obligations that occurred upon the vesting of restricted common stock under the terms of the 2016 Equity Incentive Plan.
(2) As of December 31, 2023, the maximum number of shares that could be purchased would not exceed the employees’ portion of taxes to be withheld on unvested shares (426,396) and potential purchases upon participant elections to diversify equity awards held in the Company’s Amended and Restated Non-Qualified Deferred Compensation Plan (81,800) into other investment options available to participants in the Plan.


39

Table of Contents
Stock Performance Graph

The following graph compares the performance of our common stock with the Nasdaq Non-Financial Stocks Index and the Nasdaq Composite (U.S.) Index. The comparison of total return (change in year-end stock price plus reinvested dividends) for each of the years assumes that $100 was invested on December 31, 2018, in each of the Company, the Nasdaq Non-Financial Stocks Index and the Nasdaq Composite (U.S.) Index with investment weighted on the basis of market capitalization. The comparisons in the graph below are based upon historical data and are not indicative of, or intended to forecast, future performance of our common stock.


2076
Total Return AnalysisDecember 31, 2018December 31, 2019December 31, 2020December 31, 2021December 31, 2022December 31, 2023
DMC Global Inc.$100.00$127.96$123.15$112.78$55.35$53.59
Nasdaq Non-Financial Stocks$100.00$139.46$207.62$264.73$179.00$277.68
Nasdaq Composite (U.S.)$100.00$131.17$159.07$200.26$160.75$203.23

40

Table of Contents
ITEM 6.                  [Reserved.]



41

Table of Contents
ITEM 7.  Management’s Discussion and Analysis of Financial Condition and Results of Operations
 
The following discussion should be read in conjunction with our historical Consolidated Financial Statements and notes included elsewhere in this annual report. A discussion regarding our financial condition and results of operations as well as our liquidity and capital resources for fiscal 2022 compared to fiscal 2021 can be found under Item 7 in our Annual Report on Form 10-K for the fiscal year ended December 31, 2022, which is available on the SEC’s website at www.sec.gov and our Investor Relations website at www.dmcglobal.com/investors.
 
Unless stated otherwise, all dollar figures in this report are presented in thousands (000s). N/M indicates that the change in dollars or percentage was not meaningful.

Overview
 
General

DMC Global Inc. (“DMC”, "we", "us", "our", or the "Company") owns and operates Arcadia Products, DynaEnergetics and NobelClad, three innovative, asset-light manufacturing businesses that provide differentiated products and engineered solutions to niche segments of the construction, energy, industrial processing and transportation markets. Each of our businesses provides a unique suite of highly engineered products and differentiated solutions, and each has established a leadership position in its respective market. Our businesses seek to capitalize on their product and service differentiation to expand profit margins, increase cash flow and enhance shareholder value. Based in Broomfield, Colorado, DMC trades on Nasdaq under the symbol “BOOM.”

Arcadia Products

On December 23, 2021, DMC completed the acquisition of 60% of the membership interests in Arcadia Products, LLC, a Colorado limited liability company resulting from the conversion of Arcadia, Inc. (collectively, “Arcadia Products”). Arcadia Products designs, engineers, fabricates, and finishes aluminum framing systems, windows, curtain walls, storefronts, entrance systems, and interior partitions to the commercial construction market. Additionally, Arcadia Products supplies customized windows and doors to the ultra-high-end residential real estate market.

Cost of products sold for Arcadia Products includes the cost of aluminum, paint, and other raw materials used in manufacturing as well as employee compensation and benefits, manufacturing facility lease expense, depreciation of manufacturing equipment, supplies and other manufacturing overhead expenses.

DynaEnergetics

DynaEnergetics designs, manufactures, markets and sells perforating systems and associated hardware for the global oil and gas industry. These products are primarily sold to oilfield service companies in the U.S., Europe, Canada, Africa, the Middle East, and Asia. The market for perforating products, which are used during the well completion process, generally corresponds with oil and gas exploration and production activity. Well completion operations are increasingly complex, which in turn has increased the demand for intrinsically-safe, reliable and technically advanced perforating systems.

Cost of products sold for DynaEnergetics includes the cost of metals, explosives and other raw materials used to manufacture shaped charges, detonating products and perforating guns as well as employee compensation and benefits, depreciation of manufacturing facilities and equipment, supplies and other manufacturing overhead expenses.
NobelClad

NobelClad produces explosion-welded clad metal plates for use in the construction of corrosion resistant industrial processing equipment and specialized transition joints for commuter rail cars, ships, and liquified natural gas (LNG) processing equipment. While most demand for our products is driven by maintenance and retrofit projects at existing plants and facilities, new projects for petrochemical processing, oil refining, and aluminum smelting facilities also account for a significant portion of total demand. These industries tend to be cyclical in nature and the timing of new order inflow remains difficult to predict. We use backlog, defined as all unfilled firm purchase orders and commitments at a point in time, to measure the immediate outlook for our NobelClad business. Most firm purchase orders and commitments are realized and shipped within twelve months. NobelClad's backlog increased to $59,357 at December 31, 2023 from $55,451 at December 31, 2022.

42

Table of Contents
Cost of products sold for NobelClad includes the cost of metals, explosive powders and other raw materials used to manufacture clad metal plates and transition joints as well as employee compensation and benefits, outside processing costs, depreciation of manufacturing facilities and equipment, manufacturing facility lease expense, supplies and other manufacturing overhead expenses.

Factors Affecting Results

Consolidated net sales were $719,188 in 2023 versus $654,086 in 2022, an increase of 10%. The improved performance primarily was driven by an increase in unit sales of DynaEnergetics’ DS perforating systems and increased activity in NobelClad's core energy and petrochemical end markets.

Arcadia Products reported sales of $298,909 in 2023, which were consistent with sales of $299,527 in 2022.

DynaEnergetics' sales of $315,026 in 2023 increased 19% compared with 2022 due primarily to an increase in unit sales of DS perforating systems. International sales increased 28%, while North American sales increased 18%.

NobelClad’s sales of $105,253 in 2023 increased 17% compared with 2022 reflecting healthy activity in core energy and petrochemical end markets.

Consolidated gross profit of 29.5% in 2023 increased from 28.4% in 2022. The percentage improvement compared to prior year was attributable to favorable project and regional mix, as well as better absorption of fixed manufacturing overhead expenses at NobelClad. Also contributing to the percentage improvement was margin recovery at Arcadia as decreases in base aluminum metal prices exceeded declines in customer pricing.

Consolidated selling, general, and administrative ("SG&A") expenses were $124,442 in 2023 compared with $118,349 in 2022. The year-over-year increase was primarily attributable to $4,343 of CEO transition expenses, as well as higher compensation and outside services costs.

Cash and marketable securities of $43,659 at December 31, 2023 increased $18,515 from $25,144 at December 31, 2022 due primarily to higher free cash flow.

Net debt, a non-GAAP measure, of $72,192 (comprised of $115,851 of total debt less $43,659 in cash, cash equivalents and marketable securities) at December 31, 2023 decreased $35,462 from $107,654 at December 31, 2022. The decrease was driven by $17,500 in Term Loan payments in 2023 and $12,471 of investments in marketable securities.

The Company’s leverage ratio, calculated in accordance with its credit facility, was 1.25 to 1.0 as of December 31, 2023 in comparison to the maximum ratio permitted of 3.0 to 1.0. The Company’s adjusted leverage ratio, calculated using net debt as of December 31, 2023, was 0.78 to 1.0.

Outlook

DMC’s Arcadia Products business serves the commercial building products market primarily in the western and southwestern United States, and the ultra-high-end residential market across the United States. We expect Arcadia Products to be the primary driver of DMC’s future financial and operational growth, reflecting its large addressable market and differentiated business model. Arcadia Products is investing in new digital technologies and manufacturing capacity to facilitate its expansion. Phase one of a new enterprise resource planning (ERP) system went live in the third quarter of 2023 and is enhancing operating efficiencies and the internal control environment. Additional aluminum painting capacity was added in the second half of 2023, and the business expects further expansions in painting and anodizing capacity in 2024.

At DynaEnergetics, U.S. well completion activity in the fourth quarter declined by approximately 8% versus the third quarter, according to the U.S. Energy Information Administration. We believe North American well completion activity will remain soft during the first quarter of 2024 based on a decline in the number of active drilling rigs and well fracking crews. DynaEnergetics introduced various premium products in 2023 and is in the process of implementing more efficient manufacturing processes that collectively are expected to partially offset persistent pricing pressure in North America’s well completions sector.

NobelClad is experiencing strong demand for its Cylindra™ cryogenic transition joints used in the LNG industry, while repair and maintenance work from downstream energy and petrochemical industries is also contributing to healthy production
43

Table of Contents
activity. Our backlog was $59,357 as of December 31, 2023 in comparison to $55,451 as of December 31, 2022. We expect to ship most orders in our backlog within twelve months.

On January 29, 2024, DMC announced its Board of Directors had initiated a review of strategic alternatives for its DynaEnergetics and NobelClad businesses. The process formalizes DMC’s ongoing efforts during the past several months to consider opportunities that unlock shareholder value. The Board has retained a financial advisor and may retain other advisors to assist in evaluating the Company’s current strategy, operations, and capital structure. The Board will consider various strategic, business, and financial alternatives for both businesses. These could include, among other things, a sale, a merger, or other business combination of a portion of DMC’s business-unit assets, and/or a strategic investment. The Board has not set a timetable to complete the strategic review process, and there can be no assurance that the review process will result in any transactions.

Use of Non-GAAP Financial Measures

In addition to disclosing financial results that are determined in accordance with generally accepted accounting principles in the United States (GAAP), the Company also discloses certain non-GAAP financial measures that we use in operational and financial decision making. Non-GAAP financial measures include the following:

EBITDA: defined as net income (loss) plus net interest, taxes, depreciation and amortization.
Adjusted EBITDA: excludes from EBITDA stock-based compensation, restructuring expenses and asset impairment charges (if applicable) and, when appropriate, nonrecurring items that management does not utilize in assessing DMC’s operating performance (as further described in the tables below).
Adjusted EBITDA attributable to DMC Global Inc. stockholders: excludes the Adjusted EBITDA attributable to the 40% redeemable noncontrolling interest in Arcadia Products.
Adjusted EBITDA for DMC business segments: defined as operating income (loss) plus depreciation, amortization, allocated stock-based compensation (if applicable), restructuring expenses and asset impairment charges (if applicable) and, when appropriate, nonrecurring items that management does not utilize in assessing DMC's operating performance.
Adjusted net income (loss): defined as net income (loss) attributable to DMC Global Inc. stockholders prior to the adjustment of redeemable noncontrolling interest plus restructuring expenses and asset impairment charges (if applicable) and, when appropriate, nonrecurring items that management does not utilize in assessing DMC's operating performance.
Adjusted diluted earnings per share: defined as diluted earnings per share attributable to DMC Global Inc. stockholders (exclusive of adjustment of redeemable noncontrolling interest) plus restructuring expenses and asset impairment charges (if applicable) and, when appropriate, nonrecurring items that management does not utilize in assessing DMC’s operating performance.
Net debt: defined as total debt less total cash, cash equivalents and marketable securities.
Free-cash flow: defined as cash flows provided by (used in) operating activities less net acquisitions of property, plant and equipment.

Management believes providing these additional financial measures is useful to investors in understanding the Company’s operating performance, including the effects of restructuring, impairment, and other nonrecurring charges, as well as its liquidity. Management typically monitors the business utilizing the above non-GAAP measures, in addition to GAAP results, to understand and compare operating results across accounting periods, and certain management incentive awards are based, in part, on these measures. The presence of non-GAAP financial measures in this report is not intended to suggest that such measures be considered in isolation or as a substitute for, or as superior to, DMC’s GAAP information, and investors are cautioned that the non-GAAP financial measures are limited in their usefulness. Given that not all companies use identical calculations, DMC’s presentation of non-GAAP financial measures may not be comparable to similarly titled measures of other companies.


44

Table of Contents
Consolidated Results of Operations
20232022$ change% change
Net sales$719,188 $654,086 $65,102 10 %
Gross profit212,052 185,447 26,605 14 %
Gross profit percentage29.5 %28.4 %
COSTS AND EXPENSES:
General and administrative expenses75,341 76,119 (778)(1)%
% of net sales10.5 %11.6 %
Selling and distribution expenses49,101 42,230 6,871 16 %
% of net sales6.8 %6.5 %
Amortization of purchased intangible assets22,667 36,926 (14,259)(39)%
% of net sales3.2 %5.6 %
Restructuring expenses, net and asset impairments3,766 182 3,584 1,969 %
Operating income61,177 29,990 31,187 104 %
Other expense, net(1,782)(594)(1,188)200 %
Interest expense, net(9,516)(6,187)(3,329)54 %
Income before income taxes49,879 23,209 26,670 115 %
Income tax provision15,120 9,376 5,744 61 %
Net income34,759 13,833 20,926 151 %
Less: Net income attributable to redeemable noncontrolling interest8,500 1,586 6,914 436 %
Net income attributable to DMC Global Inc.26,259 12,247 14,012 114 %
Adjusted EBITDA attributable to DMC Global Inc.$96,063 $74,199 $21,864 29 %

Net sales were $719,188 for the twelve months ended December 31, 2023, an increase of 10% compared with 2022, primarily due to an increase in unit sales of DynaEnergetics’ DS perforating systems and increased activity in NobelClad's core energy and petrochemical end markets.

Gross profit percentage was 29.5% versus 28.4% in 2022. The improvement compared to the prior year was attributable to the favorable project and regional mix at NobelClad and margin recovery at Arcadia Products.

General and administrative expenses decreased $778 for the twelve months ended December 31, 2023 compared with 2022. The decrease was driven by various cost savings initiatives, including headcount reductions and decreased business travel, partially offset by $4,343 of CEO transition expenses.

Selling and distribution expenses increased $6,871 for the twelve months ended December 31, 2023 compared with 2022. The higher expense was primarily due to increases in compensation costs of $3,543, marketing and certain other outside services costs of $1,562, bad debt expense of $1,133, and freight and supplies costs of $621.

Amortization of purchased intangible assets decreased $14,259 for the year ended December 31, 2023 compared with 2022 as the Arcadia Products customer backlog purchased intangible asset was fully amortized in 2022.

Restructuring expenses, net and asset impairments increased $3,584 for the year ended December 31, 2023 compared with 2022 due to $2,471 of asset impairments primarily associated with the abandonment of a software asset at DynaEnergetics and $1,295 of cost reduction initiatives, including employee severance, primarily at DynaEnergetics.

Operating income of $61,177 increased $31,187 for the year ended December 31, 2023 compared with 2022. The increase in operating income was primarily the result of increased gross profit.

Other expense, net of $1,782 in 2023 primarily related to net realized foreign currency exchange losses. Currency gains and losses can arise when subsidiaries enter into inter-company and third-party transactions that are denominated in currencies other than their functional currency, including foreign currency forward contracts used to offset foreign exchange rate fluctuations on certain foreign currency denominated asset and liability positions.
45

Table of Contents

Interest expense, net of $9,516 in 2023 increased 54% compared with 2022 due to an increase in floating interest rates related to the Term Loan.

Income tax provision of $15,120 was recorded on income before taxes of $49,879. Our most significant operations are in the United States, which has a 21% statutory income tax rate, and Germany, which has a 32% combined statutory income tax rate. The mix of income or loss before income taxes between these jurisdictions is one of the primary drivers of the difference between our 21% statutory tax rate and our effective tax rate. The effective rate was impacted unfavorably by the geographic mix of pretax income, state taxes, and certain compensation expenses that are not tax deductible in the U.S. The operating results of Arcadia that are attributable to the redeemable noncontrolling interest holder are not taxed at DMC, which resulted in a partially offsetting favorable impact to the effective tax rate. We recorded an income tax provision of $9,376 on income before income taxes of $23,209 in 2022. The prior year rate was impacted by the same factors previously discussed.

Net income attributable to DMC Global Inc. in 2023 was $26,259, or $1.08 per diluted share, after adjustment to the redeemable noncontrolling interest, compared with net income of $12,247, or $0.72 per diluted share, in 2022.

Adjusted EBITDA in 2023 increased compared with 2022 due to the factors discussed above. See "Use of Non-GAAP Financial Measures" above for explanation of the use of Adjusted EBITDA, a non-GAAP measure. The following is a reconciliation of the most directly comparable GAAP measure to Adjusted EBITDA.
 
 20232022
Net income$34,759 $13,833 
Interest expense, net9,516 6,187 
Income tax provision15,120 9,376 
Depreciation13,840 14,281 
Amortization of purchased intangible assets22,667 36,926 
EBITDA95,902 80,603 
Stock-based compensation10,115 10,058 
CEO transition expenses4,343 — 
Restructuring expenses, net and asset impairments3,766 182 
Nonrecurring retirement expenses— 1,100 
Amortization of acquisition-related inventory valuation step-up— 430 
Other expense, net1,782 594 
Adjusted EBITDA115,908 92,967 
Adjusted EBITDA attributable to redeemable noncontrolling interest(19,845)(18,768)
Adjusted EBITDA attributable to DMC Global Inc. stockholders$96,063 $74,199 

Adjusted Net Income and Adjusted Diluted Earnings Per Share increased compared with 2022 due to the factors discussed above. See "Use of Non-GAAP Financial Measures" above for explanation of the use of non-GAAP measures. The following is a reconciliation of the most directly comparable GAAP measures to Adjusted Net Income and Adjusted Diluted Earnings Per Share.
46

Table of Contents

Twelve months ended December 31, 2023
Amount
Per Share(1)
Net income attributable to DMC Global Inc. (2)
$26,259 $1.35 
CEO transition expenses and accelerated stock-based compensation, net of tax (3)
6,284 0.32 
Restructuring expenses and asset impairments, net of tax2,773 0.14 
As adjusted$35,316 $1.81 

(1) Calculated using diluted weighted average shares outstanding of 19,518,382
(2) Net income attributable to DMC Global Inc. prior to the adjustment of redeemable noncontrolling interest
(3) Includes CEO transition expenses of $4,343 and accelerated stock-based compensation of $3,040 related to the vesting of the former CEO’s outstanding equity awards, net of tax.


Twelve months ended December 31, 2022
Amount
Per Share(1)
Net income attributable to DMC Global Inc. (2)
$12,247 $0.63 
Nonrecurring retirement expenses, net of tax905 0.05 
Amortization of acquisition-related inventory valuation step-up, net of tax199 0.01 
NobelClad restructuring expenses and asset impairments, net of tax124 0.01 
As adjusted$13,475 $0.70 

(1) Calculated using diluted weighted average shares outstanding of 19,369,165
(2) Net income attributable to DMC Global Inc. prior to the adjustment of redeemable noncontrolling interest
47

Table of Contents
Business Segment Financial Information

We primarily evaluate performance and allocate resources based on segment revenues, operating income and Adjusted EBITDA as well as projected future performance. Segment operating income is defined as revenues less expenses identifiable to the segment. DMC operating income and Adjusted EBITDA include unallocated corporate expenses and unallocated stock-based compensation expense. Stock-based compensation is not allocated to wholly owned segments, DynaEnergetics and NobelClad. Stock-based compensation is allocated to the Arcadia Products segment as 60% of such expense is attributable to the Company, whereas the remaining 40% is attributable to the redeemable noncontrolling interest holder. Segment operating income will reconcile to consolidated income before income taxes by deducting unallocated corporate expenses, unallocated stock-based compensation, other (expense) income, net, and interest expense, net.

Net sales, segment operating income, and Adjusted EBITDA for each segment were as follows for years ended December 31:
2023
Arcadia Products
DynaEnergeticsNobelCladDMC Global Inc.
Net Sales$298,909 $315,026 $105,253 $719,188 
% of Consolidated41.6 %43.8 %14.6 %
Operating income21,407 46,353 19,427 61,177 
Adjusted EBITDA attributable to DMC Global Inc. 29,767 56,270 22,760 96,063 
2022
Arcadia ProductsDynaEnergeticsNobelCladDMC Global Inc.
Net Sales299,527 $264,327 $90,232 $654,086 
% of Consolidated45.8 %40.4 %13.8 %
Operating income3,962 39,055 7,989 29,990 
Adjusted EBITDA attributable to DMC Global Inc.28,152 46,932 11,901 74,199 

Arcadia Products
20232022$ change% change
Net sales$298,909 $299,527 $(618)— %
Gross profit92,252 88,334 3,918 %
Gross profit percentage30.9 %29.5 %
COSTS AND EXPENSES:
General and administrative expenses30,488 31,872 (1,384)(4)%
Selling and distribution expenses17,749 16,184 1,565 10 %
Amortization of purchased intangible assets22,608 36,316 (13,708)(38)%
Operating income21,407 3,962 17,445 440 %
Adjusted EBITDA49,612 46,920 2,692 %
Less: adjusted EBITDA attributable to redeemable noncontrolling interest(19,845)(18,768)(1,077)%
Adjusted EBITDA attributable to DMC Global Inc.$29,767 $28,152 $1,615 %

48

Table of Contents
Net sales of $298,909 in 2023 were comparable to net sales of $299,527 in 2022.

Gross profit percentage increased to 30.9% in 2023 primarily due to decreases in base aluminum metal costs which exceeded declines in customer pricing.

General and administrative expenses were lower by $1,384 in 2023 compared to 2022 due primarily to a decrease in stock-based compensation of $656 and a decrease in outside services costs of $538.

Selling and distribution expenses increased $1,565 in 2023 compared to 2022 due to higher compensation costs.

Amortization of purchased intangible assets decreased $13,708 in 2023 compared to 2022 as the customer backlog purchased intangible asset was fully amortized in 2022.

Operating income increased $17,445 in 2023 compared to 2022 due to the factors discussed above.

Adjusted EBITDA increased in 2023 due to the factors discussed above. See “Use of Non-GAAP Financial Measures” above for explanation of the use of Adjusted EBITDA, a non-GAAP measure. The following is a reconciliation of the most directly comparable GAAP measure to Adjusted EBITDA.

20232022
Operating income$21,407 $3,962 
Adjustments:
Depreciation3,695 2,906 
Amortization of purchased intangible assets22,608 36,316 
Stock-based compensation1,571 2,206 
CEO transition expenses331 — 
Amortization of acquisition-related inventory valuation step-up— 430 
Nonrecurring retirement expenses— 1,100 
Adjusted EBITDA$49,612 $46,920 
Less: adjusted EBITDA attributable to redeemable noncontrolling interest(19,845)(18,768)
Adjusted EBITDA attributable to DMC Global Inc.$29,767 $28,152 

DynaEnergetics
20232022$ change% change
Net sales$315,026 $264,327 $50,699 19 %
Gross profit86,701 75,569 11,132 15 %
Gross profit percentage27.5 %28.6 %
COSTS AND EXPENSES:
General and administrative expenses15,806 19,627 (3,821)(19 %)
Selling and distribution expenses21,472 16,588 4,884 29 %
Amortization of purchased intangible assets59 299 (240)(80)%
Restructuring expenses, net and asset impairments3,011 — 3,011 100 %
Operating income46,353 39,055 7,298 19 %
Adjusted EBITDA$56,270 $46,932 $9,338 20 %

Net sales increased $50,699 in 2023 compared to 2022 due to higher North American drilling and well completions, which led to increased demand for DS perforating systems. International sales also increased by 28%, which favorably impacted 2023 results.

Gross profit percentage decreased to 27.5% primarily due to an unfavorable customer mix.

49

Table of Contents
General and administrative expenses decreased by $3,821 compared with 2022 primarily due to lower patent infringement litigation costs of $3,019 and depreciation expense of $533.

Selling and distribution expenses increased by $4,884 compared with 2022 primarily due to increases in marketing costs of $1,609, bad debt expense of $1,371, compensation costs of $831, freight and other supplies expense of $790, and business-related travel of $112.

Restructuring expenses, net and asset impairments increased $3,011 for the year ended December 31, 2023 compared with 2022 due to $1,140 of cost reduction initiatives, primarily employee severance, and an asset impairment charge of $1,871 associated with the abandonment of a software asset.

Operating income increased by $7,298 compared with 2022 due primarily to increased gross profit.

Adjusted EBITDA increased in 2023 compared with 2022 primarily due to the factors discussed above. See "Use of Non-GAAP Financial Measures" above for explanation of the use of Adjusted EBITDA, a non-GAAP measure. The following is a reconciliation of the most directly comparable GAAP measure to Adjusted EBITDA.
20232022
Operating income$46,353 $39,055 
Adjustments:
Depreciation6,847 7,578 
Amortization of purchased intangible assets59 299 
Restructuring expenses, net and asset impairments3,011 — 
Adjusted EBITDA$56,270 $46,932 

NobelClad
20232022$ change% change
Net sales$105,253 $90,232 $15,021 17 %
Gross profit33,529 22,050 11,479 52 %
Gross profit percentage31.9 %24.4 %
COSTS AND EXPENSES:
General and administrative expenses4,092 4,587 (495)(11)%
Selling and distribution expenses9,570 8,981 589 %
Amortization of purchased intangible assets— 311 (311)(100)%
Restructuring expenses, net and asset impairments440 182 258 142 %
Operating income19,427 7,989 11,438 143 %
Adjusted EBITDA$22,760 $11,901 $10,859 91 %

Net sales increased $15,021 in 2023 compared with 2022 due primarily to higher activity in core energy and petrochemical end markets, including increased pressure vessel plate shipments.

Gross profit percentage increased to 31.9% in 2023 due to a more favorable project and regional mix, as well as the impact of higher sales on fixed manufacturing overhead expenses.

General and administrative expenses decreased by $495 compared with 2022 due to lower outside services costs driven by a decrease in ERP system implementation costs.

Selling and distribution expenses increased by $589 compared with 2022 due primarily to higher compensation costs of $787, partially offset by a decrease in depreciation of $105 and bad debt expense of $61.

Restructuring expenses, net and asset impairments increased by $258 compared with 2022 due to the impairment of a manufacturing asset that was removed from production.

Operating income increased $11,438 compared to 2022 primarily due to an increase in gross profit.
50

Table of Contents

Adjusted EBITDA increased due to the factors discussed above. See "Use of Non-GAAP Financial Measures" above for explanation of the use of Adjusted EBITDA, a non-GAAP measure. The following is a reconciliation of the most directly comparable GAAP measure to Adjusted EBITDA.

20232022
Operating income$19,427 $7,989 
Adjustments:
Depreciation2,893 3,419 
Amortization of purchased intangible assets— 311 
Restructuring expenses, net and asset impairments440 182 
Adjusted EBITDA$22,760 $11,901 

Liquidity and Capital Resources
 
We have historically financed our operations from a combination of internally generated cash flow, revolving credit borrowings, and various long-term debt arrangements. Our net debt position was $72,192 at December 31, 2023 compared to $107,654 at December 31, 2022. The decrease was driven by $17,500 in Term Loan payments in 2023 and $12,471 of investments in marketable securities. We have a fully undrawn $50,000 revolving credit facility at December 31, 2023.

On October 22, 2020, we commenced an at-the-market equity ("ATM") program under a shelf registration statement filed in May 2020 under which we have sold a total of 1,006,180 shares of common stock for net proceeds of $51,002 since inception. There was no ATM activity for the years ended December 31, 2023 and 2022.

In May 2021, the Company completed a registered public offering of its stock under an automatic shelf registration statement on Form S-3ASR filed on May 3, 2021, issuing a total of 2,875,000 shares of its common stock, which included the exercise of the over-allotment option, at a market price of $45 per share resulting in gross proceeds of $129,375. Net proceeds from the offering were $123,461 after deducting underwriter fees and other expenses of $5,914. We used proceeds from the ATM program and the registered public offering as part of the consideration used to acquire our 60% controlling interest in Arcadia Products.

In 2023, the Company completed a shelf registration statement on Form S-3, which became effective on March 31, 2023, for the potential offering of securities not to exceed $200,000. We have not issued shares under this registration statement as of December 31, 2023. We may in the future seek to reengage under an at-the-market offering program or otherwise access the capital markets, but there can be no assurance that any future capital will be available on acceptable terms or at all.

We believe that cash and cash equivalents and marketable securities on hand, cash flow from operations, funds available under our credit facilities and any future replacement thereof will be sufficient to fund the working capital, required minimum debt service payments, and other capital expenditure requirements of our current business operations for the foreseeable future. We may also execute capital markets transactions, including at-the-market offering programs, to raise additional funds if we believe market conditions are favorable, but there can be no assurance that any future capital will be available on acceptable terms or at all. Nevertheless, our ability to generate sufficient cash flows from operations will depend upon our success in executing our strategies. If we are unable to (i) realize sales from our backlog; (ii) secure new customer orders; (iii) continue selling products at profitable margins; and (iv) continue to implement cost-effective internal processes, our ability to meet cash requirements through operating activities could be impacted. Furthermore, any restriction on the availability of borrowings under our credit facilities could negatively affect our ability to meet future cash requirements. We will continue to monitor financial market conditions, including the related impact on credit availability and capital markets.

Debt facilities
 
On December 23, 2021, in connection with the Arcadia Products acquisition, we entered into a five-year $200,000 syndicated credit agreement (“credit facility”) which included a $150,000 Term Loan (the "Term Loan"), which is amortizable at 10% of principal per year with a balloon payment for the outstanding balance upon the credit facility maturity date in 2026, and allows for revolving loans of up to $50,000. The credit facility is secured by the assets of DMC including accounts receivable, inventory, and fixed assets, including Arcadia Products and its subsidiary, as well as guarantees and share pledges by DMC and its subsidiaries.

51

Table of Contents
Borrowings under the $150,000 Term Loan and $50,000 revolving loan limit can be in the form of Adjusted Daily Simple Secured Overnight Financing Rate ("SOFR") loans or one month Adjusted Term SOFR loans. Additionally, U.S. dollar borrowings on the revolving loan can be in the form of Base Rate loans (Base Rate borrowings are based on the greater of the administrative agent’s prime rate, an adjusted Federal Funds rate or an adjusted SOFR rate). SOFR loans bear interest at the applicable SOFR rate plus an applicable margin (varying from 1.50% to 3.00%). Base Rate loans bear interest at the defined Base rate plus an applicable margin (varying from 0.50% to 2.00%).

The credit facility includes various covenants and restrictions, certain of which relate to the payment of dividends or other distributions to stockholders; redemption of capital stock; incurrence of additional indebtedness; mortgaging, pledging or disposition of major assets; and maintenance of specified ratios. As of December 31, 2023, we were in compliance with all financial covenants and other provisions of our debt agreements.

The leverage ratio is defined in the credit facility as the ratio of Consolidated Funded Indebtedness (as defined in the credit facility) on the last day of any trailing four quarter period to Consolidated Pro Forma EBITDA (as defined in the credit facility) for such period. Consolidated Pro Forma EBITDA equals Adjusted EBITDA as calculated within the Consolidated Results of Operations section plus certain predefined add-backs. The maximum leverage ratio permitted by our credit facility is 3.00 to 1.0 from the quarter ended December 31, 2023 and thereafter. The actual leverage ratio as of December 31, 2023, calculated in accordance with the credit facility, as amended, was 1.25 to 1.0.

The debt service coverage ratio is defined in the credit facility as the ratio of Consolidated Pro Forma EBITDA less the sum of capital distributions paid in cash (other than those made with respect to preferred stock issued under the Operating Agreement), Consolidated Unfunded Capital Expenditures (as defined in the credit facility), and net cash income taxes to the sum of cash interest expense, any dividends on the preferred stock paid in cash, and scheduled principal payments on funded indebtedness. Under our credit facility, the minimum debt service coverage ratio permitted is 1.35 to 1.0. The actual debt service coverage ratio for the trailing twelve months ended December 31, 2023 was 3.05 to 1.0.

As of December 31, 2023, borrowings of $117,500 on the Term Loan under our credit facility were outstanding. No amounts were outstanding on the $50,000 revolver as of December 31, 2023.

We also maintain a line of credit with a German bank for certain European operations. This line of credit provides a borrowing capacity of €7,000 on which no amounts were outstanding as of December 31, 2023.

Refer to Note 14 within Item 8 — Financial Statements and Supplementary Data for discussion of the credit facility amendment executed subsequent to December 31, 2023. The credit facility amendment was executed, in part, with the intention to provide the Company with the financial flexibility to purchase the remaining interest in Arcadia Products.

Redeemable noncontrolling interest

The Operating Agreement for Arcadia Products contains a right for the Company to purchase the remaining interest in Arcadia Products from the minority interest holder on or after the third anniversary of the acquisition closing date (“Call Option”). Similarly, the minority interest holder of Arcadia Products has the right to sell its remaining interest in Arcadia Products to the Company on or after the third anniversary of the acquisition closing date (“Put Option”). Both the Call Option and Put Option enable the respective holder to exercise their rights based upon a predefined calculation as included within the Operating Agreement.

As of December 31, 2023, the redeemable noncontrolling interest is $187,760 in comparison to our previous estimate at December 31, 2022 of $187,522. Upon settlement, consideration paid will be net of the $24,902 promissory note outstanding due from the redeemable noncontrolling interest holder. Refer to Note 2 within Item 8 — Financial Statements and Supplementary Data for further information related to the valuation of the redeemable noncontrolling interest and promissory note outstanding.

Other contractual obligations and commitments
 
The table below presents principal cash flows by expected maturity dates for our debt obligations and other contractual obligations and commitments as of December 31, 2023:

52

Table of Contents
Payment Due by Period
As of December 31, 2023
 Less than  More than 
Other Contractual Obligations1 Year1-3 Years3-5 Years5 YearsTotal
Credit facility(1)
$15,000 $102,500 $— $117,500 
Operating lease obligations(2)
9,575 17,945 13,608 14,367 55,495 
Purchase obligations(3)
92,827 — — — 92,827 
Total(4)
$117,402 $120,445 $13,608 $14,367 $265,822 
(1)  Represents outstanding borrowings under our credit facility but excludes future interest expense on outstanding credit facility borrowings. For more information about our debt obligations, refer to Note 6 "Debt" within Item 8 — Financial Statements and Supplementary Data.

(2) The operating lease obligations presented reflect future minimum lease payments due under non-cancelable portions of our leases as of December 31, 2023. Our operating lease obligations are described in Note 5 "Leases" within Item 8 — Financial Statements and Supplementary Data.

(3)  Amounts represent firm commitments to purchase goods or services to be utilized in the normal course of business. These amounts are not reflected in the Consolidated Balance Sheets.

(4) The above table does not include amounts potentially payable upon exercise of the Put Option or Call Option associated with the redeemable noncontrolling interest.

Cash flows from operating activities
 
Net cash provided by operating activities was $65,927 in 2023 compared to $44,936 in 2022. The increase primarily was due to higher net income. Specifically, the NobelClad and DynaEnergetics business segments experienced increases in operating income of $11,438 and $7,298, respectively. The improved financial performance was driven by higher activity levels in each segment's core end markets. Additionally, working capital impacts on operating cash flows improved in 2023 as compared to 2022.

Cash flows from investing activities
 
Net cash used in investing activities in 2023 of $28,101 primarily related to the acquisition of property, plant and equipment of $15,974 and investments in marketable securities of $12,471.

Net cash used in investing activities in 2022 was $20,926 and primarily related to the acquisition of property, plant and equipment of $18,584 and consideration adjustments related to the acquisition of Arcadia Products of $2,404.

 Cash flows from financing activities
 
Net cash used in financing activities in 2023 totaled $33,182, which included payments on our Term Loan of $17,500, distributions to the redeemable noncontrolling interest holder of $13,515, and treasury stock purchases of $2,481.

Net cash used in financing activities in 2022 totaled $28,510, which included payments on our Term Loan of $15,000, distributions to the redeemable noncontrolling interest holder of $12,300, and treasury stock purchases of $1,231.

Payment of dividends

Any determination to pay cash dividends is at the discretion of the Board of Directors. On April 23, 2020, DMC announced that its Board of Directors suspended the quarterly dividend indefinitely. Future dividends may be affected by, among other items, our views on potential future capital requirements, future business prospects, debt covenant compliance considerations, changes in income tax laws, and any other factors that our Board of Directors deems relevant.

Critical Accounting Estimates
 
Our Consolidated Financial Statements contain information that is pertinent to management’s discussion and analysis of results of operations and financial condition. Preparation of financial statements in conformity with generally accepted
53

Table of Contents
accounting principles in the United States requires that management make estimates, judgments and assumptions that affect the amounts reported for revenues, expenses, assets, liabilities, and other related disclosures.

Our critical accounting estimates, described below, are important to the portrayal of our results of operations and financial condition. Management’s judgments and estimates in these areas are based on information available and at times requires management to make difficult, subjective, and complex judgments. Actual results may or may not differ from these estimates.
 
Inventories

Inventories are stated at the lower-of-cost (first-in, first-out) or net realizable value. Significant cost elements included in inventory are raw materials, labor, freight, subcontract costs, and manufacturing overhead. As necessary, we write down inventory to its net realizable value by recording provisions for excess, slow moving and obsolete inventory. To determine provision amounts, we regularly review inventory quantities on hand and values, and compare them to estimates of future product demand, market conditions, production requirements and technological developments. If assumptions about future demand change and/or actual market conditions are less favorable than those projected by the Company, additional write-downs of inventories may be required.

Goodwill

Goodwill represents the amount by which the purchase price exceeds the fair value of identifiable tangible and intangible assets and liabilities acquired in a business combination. Goodwill acquired in a business combination and determined to have an indefinite useful life is not amortized, but instead is tested for impairment at least annually during the fourth quarter or whenever events or changes in circumstances indicate that the carrying value might not be fully recoverable. For goodwill, impairment is assessed at the reporting unit level. A reporting unit is defined as an operating segment or a component of an operating segment to the extent discrete financial information is available that is reviewed by segment management. The Company's reporting units are each of the three operating segments disclosed in Note 10 within Item 8 — Financial Statements and Supplementary Data.

To test goodwill for impairment, we first perform a qualitative assessment to determine whether it is more likely than not that the fair value of a reporting unit is less than its carrying value. For the qualitative assessment, we consider macroeconomic and market conditions, cost factors, financial performance and other relevant entity-specific events. If we conclude that it is more likely than not that the fair value of a reporting unit is less than its carrying value during the qualitative assessment, then we quantitatively estimate the fair value of the reporting unit and compare the estimated fair value to its carrying value. Based on the results of the quantitative assessment, if the carrying value exceeds the fair value of the reporting unit, an impairment loss is recognized for the difference.

The assumptions used in a quantitative assessment require significant judgment, which include assumptions about future economic conditions and company-specific conditions and plans. In the Company's quantitative assessment, we estimate the fair value of a reporting unit by using the income approach, specifically a discounted cash flow analysis. A number of assumptions and estimates are required in performing the discounted cash flow analysis, including forecasts of revenues, gross profits, capital expenditures, discount rates, working capital changes, and terminal growth rates. Actual results may differ from those assumed in the forecasts.

As of December 31, 2023, the carrying value of goodwill was $141,725 and relates entirely to the Arcadia Products operating segment and reporting unit. As of the date of the 2023 annual impairment test, we performed a quantitative assessment and concluded that the fair value of the Arcadia Products reporting unit exceeded its carrying value by approximately 10%. Discount rates are one of the more significant assumptions used in the income approach. If the Company increased the discount rate used by approximately 100 basis points, the fair value of Arcadia Products would still exceed its carrying value. A sustained decline in general economic conditions, activity levels in end markets or equity valuations could impact the judgments and assumptions used to estimate the fair value of Arcadia Products, and the Company could be required to record an impairment charge in the future. If the Company was required to recognize an impairment charge in the future, the Consolidated Balance Sheets and Consolidated Statements of Operations and Comprehensive Income (Loss) could be materially impacted; however, the non-cash charge would not impact the Company's consolidated cash flows, current liquidity, and capital resources.

54

Table of Contents
Asset impairments
 
Finite-lived assets, including purchased intangible assets, property, plant and equipment, and right-of-use assets, are tested for impairment whenever events or changes in circumstances indicate that their carrying value may not be recoverable. We compare the expected undiscounted future operating cash flows associated with applicable assets or asset groupings to their respective carrying values to determine if they are fully recoverable when indicators of impairment are present. If the expected future operating cash flows of an asset or asset grouping are not sufficient to recover the related carrying value, we estimate the fair value of the asset or asset grouping. Impairment is recognized when the carrying amount of the asset or asset grouping is not recoverable and when carrying value exceeds the estimated fair value.

The net carrying value of our purchased intangible assets as of December 31, 2023 was $195,260 and includes $195,215 of purchased intangible assets related to Arcadia Products. The net carrying values of our property, plant and equipment and right-of-use assets as of December 31, 2023 were $129,267 and $45,409, respectively. During the year ended December 31, 2023, we recorded impairment charges on our property, plant and equipment of $2,471. The impairment charges included $1,871 related to the abandonment of a software asset at DynaEnergetics and $440 attributable to a manufacturing asset in NobelClad that was removed from production.

Income taxes
 
We recognize deferred tax assets and liabilities for the expected future income tax consequences of temporary differences between the financial reporting and tax bases of assets and liabilities. Deferred tax assets are recognized for the expected future effects of all deductible temporary differences to the extent we believe these assets will more likely than not be realized. We record a valuation allowance when, based on current circumstances, it is more likely than not that all or a portion of the deferred tax assets will not be realized. In making such determination, we consider all available positive and negative evidence, including future reversals of existing taxable temporary differences, projected future taxable income, tax planning strategies, recent financial performance and existing valuation allowances, if any. As of December 31, 2023, we have a valuation allowance of $6,167 recorded against deferred tax assets primarily in our foreign jurisdictions.

We recognize the tax benefits from uncertain tax positions only when it is more likely than not, based on the technical merits of the position, that the tax position will be sustained upon examination, including the resolution of any related appeals or litigation. The tax benefits recognized in the Consolidated Financial Statements from such a position are measured as the largest benefit that is more likely than not to be realized upon ultimate resolution. As of December 31, 2023, we have an uncertain tax position liability of $5,017 recorded in our Consolidated Balance Sheet related to tax positions taken in prior periods.

Off Balance Sheet Arrangements
 
At December 31, 2023, we had no off-balance sheet arrangements, as defined by SEC rules, that have or are reasonably likely to have a material current or future effect on our financial condition, revenues or expenses, results of operations, liquidity, capital expenditures or capital resources.
 
Recent Accounting Pronouncements
 
Refer to Note 2 "Significant Accounting Policies" within Part II, Item 8 — Financial Statements and Supplementary Data in this annual report for a discussion, as applicable, of recent accounting pronouncements and their anticipated effect on our business.

ITEM 7A.        Quantitative and Qualitative Disclosures about Market Risk
 
Foreign Currency Risk
 
Our Consolidated Financial Statements are expressed in U.S. dollars, but a portion of our business is conducted in currencies other than U.S. dollars. Changes in the exchange rates for such currencies into U.S. dollars can affect our revenues, earnings, and the carrying value of our assets and liabilities in our Consolidated Balance Sheets, either positively or negativ