Exhibit 99.1

 

 

FOR IMMEDIATE RELEASE:		CONTACT:
		Pfeiffer High Investor Relations, Inc.
		Geoff High
		303-393-7044

 

DYNAMIC MATERIALS REPORTS FIRST QUARTER FINANCIAL RESULTS

 

BOULDER, Colo. — April 30, 2013 — Dynamic Materials Corporation (DMC) (Nasdaq: BOOM), today reported financial results for its first quarter ended March 31, 2013.

 

First quarter sales were $46.3 million, down 8% from sales of $50.2 million in last year’s first quarter, and a sequential decline of 12% from $52.5 million reported in last year’s fourth quarter.  Management’s prior forecasts called for a sales decline of 7% to 10% versus the first quarter last year.  First quarter gross margin was 28% versus 29% in the year-ago first quarter and 31% in the fourth quarter.

 

As previously reported, operating results for the first quarter reflect $3.0 million of non-recurring expenses associated with recent management retirements.  Consequently, DMC reported a first quarter loss from operations of $1.1 million versus income from operations of $4.1 million in last year’s first quarter and $4.5 million in the 2012 fourth quarter.

 

First quarter net income was $215,000, or $0.02 per diluted share, down from $2.4 million, or $0.18 per diluted share, in the year-ago first quarter, and net income of $2.9 million, or $0.21 per diluted share, in the fourth quarter.  Net income in the 2013 first quarter reflects a tax benefit of approximately $1.2 million, including a $908,000 benefit related to recently enacted federal tax legislation that was applicable to 2012, but could not be recognized until 2013.

 

Adjusted EBITDA during the first quarter was $3.3 million versus $8.1 million in last year’s first quarter and $9.1 million in the fourth quarter.  Adjusted EBITDA is a non-GAAP (generally accepted accounting principles) financial measure used by management to measure operating performance.  See additional information about adjusted EBITDA at the end of this news release, as well as a reconciliation of adjusted EBITDA to GAAP measures.

 

Explosive Metalworking

 

Nobelclad, the Company’s Explosive Metalworking business, reported sales of $26.2 million, down 5% from $27.5 million in the first quarter last year.  Operating income was $2.4 million versus $4.1 million in the same quarter a year ago.  Adjusted EBITDA was $3.9 million, versus $5.5 million in the comparable year-ago quarter.  The segment closed the quarter with an order backlog of $47.6 million, up from $46.4 million at the end of the fourth quarter.

 

Oilfield Products

 

Sales at DYNAenergetics, DMC’s Oilfield Products business, were $18.7 million, down 11% from $21.0 million in last year’s first quarter.  Last year’s first quarter results included approximately $2.5 million associated with an annual tender order from India.  DYNAenergetics expects to ship the full 2013 Indian tender order, valued at $3.2 million, during this year’s second quarter.  Operating income was $1.7 million versus $2.0 million in the first quarter last year, while adjusted EBITDA was $3.1 million versus $3.5 million in the 2012 first quarter.

 

 

AMK Welding

 

Sales at DMC’s AMK Welding segment were $1.4 million, down from $1.7 million in last year’s first quarter.  The decline reflects a continued pullback in ground power sales following a key customer’s decision to discontinue production of a gas-fired turbine platform.  AMK reported a loss from operations of $294,000 versus an operating loss of $87,000 in the 2012 first quarter.  Adjusted EBITDA was a negative $144,000 compared with adjusted EBITDA of $37,000 in last year’s first quarter.

 

Management Commentary

 

“First quarter sales came in near the high end of our forecast range, and we made important progress on many of our operational objectives during the quarter,” said Kevin Longe, president and CEO.  “Our Nobelclad team recently secured two large explosion welding orders it had been pursuing during the past several quarters.  The first came from the chemical industry, and relates to crystallizers and evaporating equipment that will be used in a large potash project in Saskatchewan.  The order was valued at $7.4 million and was included in our March 31, 2013 backlog.  The second, valued at more than $6.0 million, was received in April and involves upstream equipment for the Wheatstone natural gas project in Australia.”

 

“The global energy and chemical industries remain active, and we continue to track a broad range of international projects that could require Nobelclad’s technical solutions,” Longe added.  “We also believe there are significant longer-range opportunities percolating in the North American refining and chemical sectors.  Industry experts regularly comment on the growing need for maintenance and modernization spending in the domestic refining space; and we continue to believe Nobelclad will ultimately benefit from projects emerging from renewed investments in the U.S. chemical sector.”

 

Longe said DYNAenergetics’ new shaped charge plant in Blum, Texas, should be complete by the end of June, and production is expected to commence early in the third quarter.  “We also have strengthened the management team at DYNAenergetics with the recent appointment of John Biggs as vice president and general manager of the Americas.  John has an extensive background in the oil and gas products industry, and spent the past 10 years in leadership roles with GE Energy/Dresser, Inc.  He will be responsible for heading DYNAenergetics’ operations, sales and marketing efforts in Canada, the United States and South America.  John will report to Ian Grieves, who we recently appointed president and general manager of DYNAenergetics’ global operations.

 

“We also are working hard to strengthen the operations, financial performance and new business prospects at AMK.  We recently announced the appointment of Gary Klein as president of the business, and are excited about the opportunities he is pursuing.  Gary is a talented leader with broad engineering, manufacturing and operational experience.  He also is very familiar with AMK’s current customers and the end markets it is targeting.  We remain very confident in AMK’s future, and believe it will return to a position of growth in coming quarters.”

 

Guidance

 

Rick Santa, senior vice president and chief financial officer, said management is maintaining its prior 2013 full-year sales forecast, which anticipates an increase of 8% to 10% versus sales of $201.6 million reported in 2012.  In addition, the full-year gross margin forecast is unchanged at 27% to 29%.  DMC’s blended effective tax rate for the full-year is now projected to be in a range of 21% to 23% versus a prior forecast of 20% to 22%.  Excluding the impact of a previously discussed first quarter tax benefit, the blended effective tax rate for fiscal 2013 is now projected to be in a range of 26% to 28%.

 

 

For the second fiscal quarter, management anticipates sales will increase by 11% to 14% versus sales of $48.7 million in the second quarter of 2012.  Gross margin is expected to be in a range of 27% to 29%.

 

Conference call information

 

Management will hold a conference call to discuss these results today at 5:00 p.m. Eastern (3:00 p.m. Mountain).  Investors are invited to listen to the call live via the Internet at www.dynamicmaterials.com, or by dialing into the teleconference at 877-407-8031 (201-689-8031 for international callers).  No passcode is necessary.  Webcast participants should access the website at least 15 minutes early to register and download any necessary audio software. A replay of the webcast will be available for 90 days and a telephonic replay will be available through May 7, 2013, by calling 877-660-6853 (201-612-7415 for international callers) and entering the Conference ID # 413078.

 

Use of Non-GAAP Financial Measures

 

Non-GAAP results are presented only as a supplement to the financial statements based on U.S. generally accepted accounting principles (GAAP). The non-GAAP financial information is provided to enhance the reader’s understanding of DMC’s financial performance, but no non-GAAP measure should be considered in isolation or as a substitute for financial measures calculated in accordance with GAAP. Reconciliations of the most directly comparable GAAP measures to non-GAAP measures are provided within the schedules attached to this release.

 

EBITDA is defined as net income plus or minus net interest plus taxes, depreciation and amortization. Adjusted EBITDA excludes from EBITDA stock-based compensation and, when appropriate, other items that management does not utilize in assessing DMC’s operating performance (as further described in the attached financial schedules). None of these non-GAAP financial measures are recognized terms under GAAP and do not purport to be an alternative to net income as an indicator of operating performance or any other GAAP measure.

 

Management uses these non-GAAP measures in its operational and financial decision-making, believing that it is useful to eliminate certain items in order to focus on what it deems to be a more reliable indicator of ongoing operating performance and the company’s ability to generate cash flow from operations. As a result, internal management reports used during monthly operating reviews feature the adjusted EBITDA. Management also believes that investors may find non-GAAP financial measures useful for the same reasons, although investors are cautioned that non-GAAP financial measures are not a substitute for GAAP disclosures. EBITDA and adjusted EBITDA are also used by research analysts, investment bankers and lenders to assess operating performance. For example, a measure similar to EBITDA is required by the lenders under DMC’s credit facility.

 

Because not all companies use identical calculations, DMC’s presentation of non-GAAP financial measures may not be comparable to other similarly titled measures of other companies. However, these measures can still be useful in evaluating the company’s performance against its peer companies because management believes the measures provide users with valuable insight into key components of GAAP financial disclosures. For example, a company with greater GAAP net income may not be as appealing to investors if its net income is more heavily comprised of gains on asset sales. Likewise, eliminating the effects of interest income and expense moderates the impact of a company’s capital structure on its performance.

 

 

All of the items included in the reconciliation from net income to EBITDA and adjusted EBITDA are either (i) non-cash items (e.g., depreciation, amortization of purchased intangibles and stock-based compensation) or (ii) items that management does not consider to be useful in assessing DMC’s operating performance (e.g., income taxes and gain on sale of assets). In the case of the non-cash items, management believes that investors can better assess the company’s operating performance if the measures are presented without such items because, unlike cash expenses, these adjustments do not affect DMC’s ability to generate free cash flow or invest in its business. For example, by adjusting for depreciation and amortization in computing EBITDA, users can compare operating performance without regard to different accounting determinations such as useful life. In the case of the other items, management believes that investors can better assess operating performance if the measures are presented without these items because their financial impact does not reflect ongoing operating performance.

 

About Dynamic Materials Corporation

 

Based in Boulder, Colorado, Dynamic Materials Corporation serves a global network of customers in the energy, industrials and infrastructure markets through two core business segments — Nobelclad and DYNAenergetics — as well as a specialized industrial service provider, AMK Welding. The Nobelclad segment is the world’s largest manufacturer of explosion-welded clad metal plates, which are used to fabricate capital equipment utilized within various process industries and other industrial sectors. DYNAenergetics is an international manufacturer and marketer of advanced explosive components and systems used to perforate oil and gas wells. AMK Welding utilizes various specialized technologies to weld components for use in power-generation turbines, and commercial and military jet engines. For more information, visit the Company’s websites at http://www.dynamicmaterials.com and http://www.dynaenergetics.com.

 

Safe Harbor Language

 

Except for the historical information contained herein, this news release contains forward-looking statements, including our guidance for second quarter and full-year 2013 sales, margins, tax rates and tax benefits, expectations regarding our global growth and operational initiatives, Nobelclad sales opportunities, completion of the new DYNAenergetics shaped charge plant, new market opportunities at AMK and the other prospects we are pursuing at each of our three business segments.  These risks and uncertainties include, but are not limited to, the following: our ability to realize sales from our backlog; our ability to obtain new contracts at attractive prices; the size and timing of customer orders and shipments; fluctuations in customer demand; our ability to successfully execute upon international growth opportunities; the success of planned senior leadership transition; fluctuations in foreign currencies, changes to customer orders; the cyclicality of our business; competitive factors; the timely completion of contracts; the timing and size of expenditures; the timing and price of metal and other raw material; the adequacy of local labor supplies at our facilities; current or future limits on manufacturing capacity at our various operations; the availability and cost of funds; and general economic conditions, both domestic and foreign, impacting our business and the business of the end-market users we serve; as well as the other risks detailed from time to time in the Company’s SEC reports, including the annual report on Form 10-K for the year ended December 31, 2012.

 

 

DYNAMIC MATERIALS CORPORATION

CONDENSED CONSOLIDATED STATEMENTS OF OPERATIONS

FOR THE THREE MONTHS ENDED MARCH 31, 2013 AND 2012

(Amounts in Thousands, Except Share and Per Share Data)

(unaudited)

 

		Three months ended
		March 31,
		2013			2012
NET SALES		$	46,270		$	50,212
COST OF PRODUCTS SOLD		33,551			35,835
Gross profit		12,719			14,377
COSTS AND EXPENSES:
General and administrative expenses		8,138			4,505
Selling and distribution expenses		4,051			4,190
Amortization of purchased intangible assets		1,585			1,544
Total costs and expenses		13,774			10,239
INCOME (LOSS) FROM OPERATIONS		(1,055		)	4,138
OTHER INCOME (EXPENSE):
Other income (expense), net		296			(200		)
Interest expense		(172		)	(211		)
Interest income		3			6
INCOME (LOSS) BEFORE INCOME TAXES AND NON-CONTROLLING INTEREST		(928		)	3,733
INCOME TAX PROVISION (BENEFIT)		(1,171		)	1,342
NET INCOME		243			2,391
Less: Net income (loss) attributable to non-controlling interest		28			(37		)
NET INCOME ATTRIBUTABLE TO DYNAMIC MATERIALS CORPORATION		$	215		$	2,428
INCOME PER SHARE:
Basic		$	0.02		$	0.18
Diluted		$	0.02		$	0.18
WEIGHTED AVERAGE NUMBER OF SHARES OUTSTANDING:
Basic		13,509,792			13,183,000
Diluted		13,513,797			13,190,193
DIVIDENDS DECLARED PER COMMON SHARE		$	0.04		$	0.04

 

 

DYNAMIC MATERIALS CORPORATION & SUBSIDIARIES

CONDENSED CONSOLIDATED BALANCE SHEETS

(Amounts in Thousands)

 

		March 31,
		2013			December 31,
		(unaudited)			2012
ASSETS
Cash and cash equivalents		$	8,174		$	8,200
Accounts receivable, net		32,912			36,981
Inventory		46,862			48,320
Other current assets		7,606			7,165
Total current assets		95,554			100,666
Property, plant and equipment, net		56,263			53,976
Goodwill, net		36,125			37,431
Purchased intangible assets, net		39,428			41,958
Other long-term assets		1,637			1,400
Total assets		$	229,007		$	235,431
LIABILITIES AND STOCKHOLDERS’ EQUITY
Accounts payable		$	10,449		$	11,281
Customer advances		1,383			1,363
Dividend payable		547			540
Accrued income taxes		295			406
Other current liabilities		8,623			9,742
Lines of credit		—			981
Current portion of long-term debt		64			65
Total current liabilities		21,361			24,378
Lines of credit		38,256			37,779
Long-term debt		37			55
Deferred tax liabilities		8,608			9,211
Other long-term liabilities		1,588			1,452
Stockholders’ equity		159,157			162,556
Total liabilities and stockholders’ equity		$	229,007		$	235,431

 

 

DYNAMIC MATERIALS CORPORATION & SUBSIDIARIES

CONDENSED CONSOLIDATED STATEMENTS OF CASH FLOWS

FOR THE THREE MONTHS ENDED MARCH 31, 2013 AND 2012

(Amounts in Thousands)

(unaudited)

 

		2013			2012
CASH FLOWS FROM OPERATING ACTIVITIES:
Net income		$	243		$	2,391
Adjustments to reconcile net income to net cash provided by operating activities -
Depreciation (including capital lease amortization)		1,417			1,367
Amortization of purchased intangible assets		1,585			1,544
Amortization of deferred debt issuance costs		25			35
Stock-based compensation		1,422			969
Deferred income tax benefit		(19		)	(305		)
Loss on disposal of property, plant and equipment		21			—
Change in working capital, net		1,596			732
Net cash provided by operating activities		6,290			6,733
CASH FLOWS FROM INVESTING ACTIVITIES:
Acquisition of property, plant and equipment		(4,453		)	(2,633		)
Acquisition of TRX Industries		—			(10,294		)
Change in other non-current assets		45			116
Net cash used in investing activities		(4,408		)	(12,811		)
CASH FLOWS FROM FINANCING ACTIVITIES:
Borrowings (repayments) on bank lines of credit, net		(202		)	9,840
Payments on long-term debt		(16		)	(1,127		)
Payments on capital lease obligations		(13		)	(24		)
Payment of dividends		(540		)	(535		)
Tax impact of stock-based compensation		(890		)	19
Net cash provided by (used in) financing activities		(1,661		)	8,173
EFFECTS OF EXCHANGE RATES ON CASH		(247		)	162
NET INCREASE (DECREASE) IN CASH AND CASH EQUIVALENTS		(26		)	2,257
CASH AND CASH EQUIVALENTS, beginning of the period		8,200			5,276
CASH AND CASH EQUIVALENTS, end of the period		$	8,174		$	7,533

 

 

DYNAMIC MATERIALS CORPORATION & SUBSIDIARIES

RECONCILIATIONS OF NON-GAAP FINANCIAL MEASUREMENTS TO MOST

DIRECTLY COMPARABLE GAAP FINANCIAL MEASUREMENTS

(Amounts in thousands)

(unaudited)

 

		Three months ended
		March 31,
		2013			2012
Explosive Metalworking		$	26,180		$	27,533
Oilfield Products		18,655			20,974
AMK Welding		1,435			1,705
Net sales		$	46,270		$	50,212
Explosive Metalworking		$	2,444		$	4,099
Oilfield Products		1,723			2,046
AMK Welding		(294		)	(87		)
Unallocated expenses		(4,928		)	(1,920		)
Income (loss) from operations		$	(1,055	)	$	4,138

 

		For the three months ended March 31, 2013
		Explosive			Oilfield			AMK			Unallocated
		Metalworking			Products			Welding			Expenses			Total
Income (loss) from operations		$	2,444		$	1,723		$	(294	)	$	(4,928	)	$	(1,055	)
Adjustments:
Net income attributable to non-controlling interest		—			(28		)	—			—			(28		)
Stock-based compensation		—			—			—			1,422			1,422
Depreciation		929			338			150						1,417
Amortization of purchased intangibles		527			1,058			—			—			1,585
Adjusted EBITDA		$	3,900		$	3,091		$	(144	)	$	(3,506	)	$	3,341

 

		For the three months ended March 31, 2012
		Explosive			Oilfield			AMK			Unallocated
		Metalworking			Products			Welding			Expenses			Total
Income (loss) from operations		$	4,099		$	2,046		$	(87	)	$	(1,920	)	$	4,138
Adjustments:
Net loss attributable to non-controlling interest		—			37			—			—			37
Stock-based compensation		—			—			—			969			969
Depreciation		879			364			124			—			1,367
Amortization of purchased intangibles		523			1,021			—			—			1,544
Adjusted EBITDA		$	5,501		$	3,468		$	37		$	(951	)	$	8,055

 

 

DYNAMIC MATERIALS CORPORATION & SUBSIDIARIES

RECONCILIATIONS OF NON-GAAP FINANCIAL MEASUREMENTS TO MOST

DIRECTLY COMPARABLE GAAP FINANCIAL MEASUREMENTS

(Amounts in thousands)

(unaudited)

 

		Three months ended
		March 31,
		2013			2012
Net income attributable to DMC		$	215		$	2,428
Interest expense		172			211
Interest income		(3		)	(6		)
Provision for income taxes		(1,171		)	1,342
Depreciation		1,417			1,367
Amortization of purchased intangible assets		1,585			1,544
EBITDA		2,215			6,886
Stock-based compensation		1,422			969
Other (income) expense, net		(296		)	200
Adjusted EBITDA		$	3,341		$	8,055